Shelf paper dispenser

[OzarkSawdust]

I made a dispenser for my peal and stick shelf paper today. Steve Good pattern, 1/2" Blond plywood, Oak fixtures, and a poplar dowel rod. Finished the Oak with spray semi-gloss Lacquer. 

I think this will be real handy...it looks like a "Good" idea...I know, bad joke.

[jollyred]

You are going to like that cutter.  I made one from his pattern, with a few modifications, and use it regularly.  My change was to make the cutting platform shorter, for easier storage.  I also used an aluminum bar for the cutting guide.  I know how easy it is for me to damage a wood straight edge with a sharp knife.  

Tom

[Gonzo]

I like it!  I may have to look into making that

[amazingkevin]

I have a need for this, Thanks for posting!!!!

[wombatie]

Oh that is a Good idea.    Well done.

Marg

[John B]

A great idea and nice looking job.
Just a thought, I do occasionally have good ones. This may or may not be that time
Placing a hack saw blade on the wood strip with the teeth just proud so you would not need to cut the paper. You could then hang it on a wall. Just thinking out loud.

[daveww1]

nice job

[OzarkSawdust]

7 hours ago, John B said:

A great idea and nice looking job.
Just a thought, I do occasionally have good ones. This may or may not be that time
Placing a hack saw blade on the wood strip with the teeth just proud so you would not need to cut the paper. You could then hang it on a wall. Just thinking out loud.

It's not really "paper" John. Don't know if you've used it down under, but it's a clear plastic like laminate. Not sure if it would cut on a hack saw blade like a roll of paper does...but it's a good idea that I may try !