OzarkSawdust Posted July 24, 2020 Report Share Posted July 24, 2020 (edited) I'm working on a Mick Jagger pattern by Steve Good. I'll work on the name tomorrow. It looks like it is raised and the cut outs are meant to look like shadows. I'll have to see if I have a drill bit small enough to make the blade holes! A spiral would be a one pass in that narrow spot...but I would wreck it for sure. I'm thinking maybe a Pegas #1, don't think a #3 would turn around. Has anyone done this one? If so what did you use on the name? I like it so far! Well, Here's the finished product. Edited July 25, 2020 by OzarkSawdust Oges, wombatie, Phantom Scroller and 4 others 7 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted July 24, 2020 Report Share Posted July 24, 2020 very nice OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted July 24, 2020 Report Share Posted July 24, 2020 Great work. I'm sure you will do a fine job on the lettering as well. OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted July 24, 2020 Author Report Share Posted July 24, 2020 Started on the name...going to be a slow go! I dropped down to a #68 drill bit and a Pegas#1 MG blade. Tried a 2/0 spiral...for about 1/8" and took it out! I'm cutting about 3/16" ( they say it's 1/4" but I don't think so) Hard Maple veneer ply from Ocooch. I'll work on it some more today. Wanted to get the Owl framed! Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted July 24, 2020 Report Share Posted July 24, 2020 Coming along nicely OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
Dragonkort Posted July 25, 2020 Report Share Posted July 25, 2020 that came out great!!! OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted July 26, 2020 Report Share Posted July 26, 2020 Looks great. Well done Gary. Marg OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 27, 2020 Report Share Posted July 27, 2020 Good one!!! OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.