WoodWiser Posted August 8, 2020 Report Share Posted August 8, 2020 Forgive me if this has been a topic before, but I am looking for recommendations for a decent scroll saw, with a price range of $200-500.00. I have owned Dremel; Delta and also have an antique Delta-Rockwell saw that I am restoring. Does anyone have any thoughts about the Shop Fox? Thanks OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
ike Posted August 9, 2020 Report Share Posted August 9, 2020 (edited) $200-$500 is a small window I would choose a Dewalt788 or Delta 964other than that there is a Porter cable. Check out the scroll saw review under the resiyurses. Home Depot has the Dewqalt 788 for $508. IKE Edited August 9, 2020 by ike OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
DME72 Posted August 9, 2020 Report Share Posted August 9, 2020 the shop fox does not look that great or very heavy duty. look for a used dewalt type 1 or hegner or hawk scroll saw. i am sure there are other saws that are good that someone else will mention.watch facebook marketplace as there are always tools for sale on there. doug OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
WoodWiser Posted August 10, 2020 Author Report Share Posted August 10, 2020 Thank You all...I will look into these. I have some other DeWalt tools, and they are really good quality. amazingkevin and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted August 10, 2020 Report Share Posted August 10, 2020 I have bought nothing but used saws, all from Craigslist. I watch everyday even though I'm no longer needing a saw. I have purchased and resold 3 saws and now have 2 of the Green Excaliburs and money in my pocket to boot. I strongly recommend doing the same if the market near you is anywhere as good as it is here where I live. scrollingforsanity and BadBob 2 Quote Link to comment Share on other sites More sharing options...
Fedido Posted August 10, 2020 Report Share Posted August 10, 2020 (edited) I was like you with the same price range. I thought about a shop fox. It didn't tickle my fancy. I ended up finding a Dewalt 788 type 1 that with shipping pushed 500 with a stand, and a light. might have been a little too much for a 20 year old saw, but I have absolutely loved it. I have since tore it down and replaced all bad bushing, which was one. I would say a Dewalt or delta as they are about the same. It is up to you though as it is your money. If I had to do this all over again, I would still take the Dewalt 788 Type 1 as it is North American built. Type 2's are made in either China or Taiwan (Senior moment I am experiencing) and from what I have leaned, it is a roll of the dice with them. Good luck. Edited August 10, 2020 by Fedido amazingkevin and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted August 11, 2020 Report Share Posted August 11, 2020 Woodwiser just understand that any Dewalt Type 1 is over 20 years old. If you are not mechanically inclined or have a friend/relative who is, it might not be the way to go. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted August 16, 2020 Report Share Posted August 16, 2020 On 8/10/2020 at 9:17 AM, Fedido said: I was like you with the same price range. I thought about a shop fox. It didn't tickle my fancy. I ended up finding a Dewalt 788 type 1 that with shipping pushed 500 with a stand, and a light. might have been a little too much for a 20 year old saw, but I have absolutely loved it. I have since tore it down and replaced all bad bushing, which was one. I would say a Dewalt or delta as they are about the same. It is up to you though as it is your money. If I had to do this all over again, I would still take the Dewalt 788 Type 1 as it is North American built. Type 2's are made in either China or Taiwan (Senior moment I am experiencing) and from what I have leaned, it is a roll of the dice with them. Good luck. wish i had your keen sense of finding bad bearings and bushings. It's a lot of work to change them all but once it's done it;s done. good job!!! Quote Link to comment Share on other sites More sharing options...
Fedido Posted August 17, 2020 Report Share Posted August 17, 2020 17 hours ago, amazingkevin said: wish i had your keen sense of finding bad bearings and bushings. It's a lot of work to change them all but once it's done it;s done. good job!!! @amazingkevin, thank you, but I did that my previous life as an aircraft mechanic, find bad bearings and have them replaced. just glad I don't need nitrogen on a scroll saw. amazingkevin and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
ike Posted August 18, 2020 Report Share Posted August 18, 2020 I had 2 type Dewalts and then I bought a Delta which is 100 difference in cost. I liked it better than the Dewalts and went longer with out repairs (2 T years but it was under warentee and I took it to the shop ( 60 miles aweea from home). it has been in the shop for 2 months so I claled the shop and they are still waiting on parts, so I went out and bought an Excell 21. it is slower cuttinjg but is best for Fretwork. I think both the Delta and Dewalt are over priced @ $500 and $400 If ydou can find a good higher end Saw buy it.IKE OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.