Travis Posted August 10, 2020 Report Share Posted August 10, 2020 One of the things I think about in August is the car shows. In my hometown, there would be a few official ones, which were fun. But there are also the pop-up shows that just appear at a restaurant parking lot on a Sunday afternoon. Usually some car club that meets up at a 50's diner, grab a burger, and then shows off their cars. I'd see one of those, pull over to look at the "fancy cars" (as my son called them). I kinda miss that this year. So how about we have our own car show? Post a pic of a scroll saw project featuring some sort of car, motorcycle, truck, military vehicle, bicycle, skateboard, or whatever. As long as it has wheels! Looking for some inspiration? Check out our Transportation section in the Pattern Library. When you post, share a memory of a vehicle you loved. My first car was a 1983 Silver Camaro. It was only a V6, but it looked fast. And a highschooler with a Camero wasn't a bad thing to have. We have a ton of great car patterns in the Pattern Library: https://www.scrollsawvillage.com/gallery/category/19-transportation/ RabidAlien, munzieb, lawson56 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Popular Post kmmcrafts Posted August 10, 2020 Popular Post Report Share Posted August 10, 2020 Ohhh Boy... I'm looking forward to this one.. Only thing is.. I need to pick one or maybe a few of my car projects since I have over 60 car clocks listed on various websites not to mention puzzles, portraits and ornaments.. I'm going to have to think about what ones have the best story to go along with them.. I guess since you said your first car was a 83 Camaro.. I'll start with one of those, LOL.. I'll think about something personal and post it along with a story behind it I suppose.. Travis, Norm Fengstad, tneilitz and 14 others 17 Quote Link to comment Share on other sites More sharing options...
Fred Buehler Posted August 11, 2020 Report Share Posted August 11, 2020 Some very nice workmanship. kmmcrafts 1 Quote Link to comment Share on other sites More sharing options...
Popular Post OzarkSawdust Posted August 11, 2020 Popular Post Report Share Posted August 11, 2020 (edited) Well...I did Santa's Pickup earlier this year. I made and sold a 57 Chevy for a car show in March...if I can find the picture..LOL. Edited August 11, 2020 by OzarkSawdust John B, Travis, Kris Martinson and 15 others 18 Quote Link to comment Share on other sites More sharing options...
Popular Post OzarkSawdust Posted August 11, 2020 Popular Post Report Share Posted August 11, 2020 How about a lawnmower...LOL? It has wheels! I did this a month or two ago for a local business. amazingkevin, wombatie, Norm Fengstad and 12 others 15 Quote Link to comment Share on other sites More sharing options...
Popular Post BadBob Posted August 11, 2020 Popular Post Report Share Posted August 11, 2020 Hot Rod 27 T Coupe MDF Air Brushed with Pink Acrylic, Metallic Blue Hubs, and Amber Shellac on the Wheels. The body is 1-1/2 inch thick MDF cut with my scroll saw. meflick, TommyT1963, Gonzo and 13 others 16 Quote Link to comment Share on other sites More sharing options...
Popular Post amazingkevin Posted August 12, 2020 Popular Post Report Share Posted August 12, 2020 (edited) Here,s one patterned by our own chief cook an bottle washer a long time ago. Edited August 12, 2020 by amazingkevin picture ChelCass, Travis, munzieb and 13 others 16 Quote Link to comment Share on other sites More sharing options...
Popular Post BadBob Posted August 12, 2020 Popular Post Report Share Posted August 12, 2020 The Deuce Coupe Version. wombatie, Norm Fengstad, tneilitz and 8 others 11 Quote Link to comment Share on other sites More sharing options...
Popular Post Norm Fengstad Posted August 12, 2020 Popular Post Report Share Posted August 12, 2020 2017 or 18 volkswagon. tneilitz, kmmcrafts, jbrowning and 13 others 16 Quote Link to comment Share on other sites More sharing options...
Popular Post edward Posted August 12, 2020 Popular Post Report Share Posted August 12, 2020 My son in law has one just like this wombatie, Lucky2, kmmcrafts and 16 others 19 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted August 12, 2020 Report Share Posted August 12, 2020 4 hours ago, edward said: My son in law has one just like this Good job on the cut! I may have to find a pattern of my old Roadrunner. Mine was a 1973, yellow with black stripes . Love the Roadrunners back then, fun cars. It had the "slap stick" and was very quick, I won 5 trophies with it and placed high numerous times at the drag strip! Does your son-in-law still have his? My stepdaughter and her husband still have mine, but I have visitation rights when I go to Nebraska...LOL. Norm Fengstad, jbrowning, amazingkevin and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Popular Post barb.j.enders Posted August 13, 2020 Popular Post Report Share Posted August 13, 2020 I made a set of these for my grandson and my nephew for Christmas gifts. Both were just under 2 at Christmas. I know my grandson loves his set! Jim Finn, new2woodwrk, meflick and 17 others 20 Quote Link to comment Share on other sites More sharing options...
Popular Post John B Posted August 13, 2020 Popular Post Report Share Posted August 13, 2020 GTHO Falcon A few other's I have made ChelCass, Lucky2, Travis and 17 others 20 Quote Link to comment Share on other sites More sharing options...
Popular Post BadBob Posted August 13, 2020 Popular Post Report Share Posted August 13, 2020 I made this Hot Rod as an experiment to see if I could use woos with knots. It was a pain to cut and sand, but I like the look of my rat rod. RabidAlien, meflick, jbrowning and 17 others 20 Quote Link to comment Share on other sites More sharing options...
Popular Post RabidAlien Posted August 13, 2020 Popular Post Report Share Posted August 13, 2020 I can only think of one thing I've cut that has wheels....or that I plan to cut that has wheels. But, I'm a military history nut, so I had to cut this Steve Good pattern: kmmcrafts, oldhudson, jbrowning and 13 others 16 Quote Link to comment Share on other sites More sharing options...
Popular Post tneilitz Posted August 13, 2020 Popular Post Report Share Posted August 13, 2020 Here's something from a few years ago. John B, TommyT1963, Ron Johnson and 14 others 17 Quote Link to comment Share on other sites More sharing options...
Fedido Posted August 13, 2020 Report Share Posted August 13, 2020 10 hours ago, RabidAlien said: I can only think of one thing I've cut that has wheels....or that I plan to cut that has wheels. But, I'm a military history nut, so I had to cut this Steve Good pattern: Good job, I have been accused of working both those aircraft at one point. Lucky2 and Kris Martinson 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Fedido Posted August 13, 2020 Popular Post Report Share Posted August 13, 2020 Bare with me on this. The top photo is an F-16 as we were coming home. It is a unit that a mentor of mine was in during WWII. The bottom photo is a cut I made of his aircraft from the same unit, just 70 years later. The middle photo is one I made for my workcenter that operates F-16’s. I was torn which one to post because the P-51 is an awesome aircraft that changed the tide of the war and I am honored to know this gentleman, but yet I worked on or around for close to 30 years. Now one can see my problem? That is why I have both. meflick, new2woodwrk, amazingkevin and 11 others 14 Quote Link to comment Share on other sites More sharing options...
Popular Post munzieb Posted August 13, 2020 Popular Post Report Share Posted August 13, 2020 I sure miss our local car shows. Lately I'm stuck on designing cars and aircrafts. My wife will put the pictures in sketch mode in PhotoShop and I'll clean them up in MS 3D paint. I like the '30's, 40's and '50's cars and ones that are unique or one offs. The clean up can take a few days (I'm a nitnoid) ChelCass, Foxfold, Kris Martinson and 19 others 22 Quote Link to comment Share on other sites More sharing options...
John B Posted August 14, 2020 Report Share Posted August 14, 2020 6 hours ago, munzieb said: I sure miss our local car shows. Lately I'm stuck on designing cars and aircrafts. My wife will put the pictures in sketch mode in PhotoShop and I'll clean them up in MS 3D paint. I like the '30's, 40's and '50's cars and ones that are unique or one offs. The clean up can take a few days (I'm a nitnoid) They are absolute beauties. Not just the cars, but the cutting is brilliant. munzieb, kmmcrafts, amazingkevin and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Popular Post Kris Martinson Posted August 14, 2020 Popular Post Report Share Posted August 14, 2020 Here's a few of mine that I've done over the years. John B, Lucky2, kmmcrafts and 18 others 21 Quote Link to comment Share on other sites More sharing options...
munzieb Posted August 14, 2020 Report Share Posted August 14, 2020 All your cuttings are great! Lucky2 and Kris Martinson 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post BadBob Posted August 14, 2020 Popular Post Report Share Posted August 14, 2020 I made this Norm Marshall car years ago and kept all these years. I made a lot of them. I don't remember if I used a scroll saw when I made these, but I did have one. A cast iron AMT brand scroll saw I no longer own, but it is still being used. I gave it o a friend after I bought my EX21. How long ago did I make these? Pretty close to forty years ago. OzarkSawdust, new2woodwrk, TommyT1963 and 15 others 18 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted August 14, 2020 Report Share Posted August 14, 2020 29 minutes ago, BadBob said: I made this Norm Marshall car years ago and kept all these years. I made a lot of them. I don't remember if I used a scroll saw when I made these, but I did have one. A cast iron AMT brand scroll saw I no longer own, but it is still being used. I gave it o a friend after I bought my EX21. How long ago did I make these? Pretty close to forty years ago. Those are AWESOME!!!! Do you still have the plans for them, or know if they're available online? Lucky2 and Norm Fengstad 2 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted August 14, 2020 Report Share Posted August 14, 2020 6 hours ago, Kris Martinson said: Here's a few of mine that I've done over the years. Very cool!! I've never really tried cars and aircraft...but I may soon...LOL amazingkevin, Kris Martinson and Lucky2 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.