amazingkevin Posted September 18, 2020 Report Share Posted September 18, 2020 On 9/3/2020 at 6:45 PM, baggetta said: MOONLIGHT DRIVE: I thought I'd get myself a new set of wheels, so I went into my shop and fired up my scrollsaw (after making the pattern) and came up with this little doozy of a vehicle. Sure I can't drive it around (but where am I going to go during this pandemic anyway), but I can dream. Free pattern of this vehicle. love it!!! Quote Link to comment Share on other sites More sharing options...
baggetta Posted September 19, 2020 Report Share Posted September 19, 2020 On 9/18/2020 at 10:08 AM, amazingkevin said: Man are you a great scroller!!!! Thank you, just pluggin' along. Al B. Quote Link to comment Share on other sites More sharing options...
baggetta Posted September 19, 2020 Report Share Posted September 19, 2020 On 9/14/2020 at 9:30 AM, Rolf said: Baggetta, love the design, especially the wheels. Thank you. Quote Link to comment Share on other sites More sharing options...
Popular Post Ron Johnson Posted September 22, 2020 Popular Post Report Share Posted September 22, 2020 Been focusing most of my shop time now making toys and will continue for the next few months. Following is what I’ve done earlier. munzieb, meflick, TommyT1963 and 12 others 15 Quote Link to comment Share on other sites More sharing options...
flarud Posted September 24, 2020 Report Share Posted September 24, 2020 On 8/21/2020 at 1:47 PM, Tomanydogs said: Here’s my sons ‘52 Chev I made a while back. And a motorcycle which was a puzzle that I converted into segmentation it stands and you can view it from either side. Right now I’m cutting my husband’s ‘71 AMC Javelin. What technique did you use to make the truck? Norm Fengstad 1 Quote Link to comment Share on other sites More sharing options...
flarud Posted September 24, 2020 Report Share Posted September 24, 2020 On 9/21/2020 at 11:11 PM, Ron Johnson said: Been focusing most of my shop time now making toys and will continue for the next few months. Following is what I’ve done earlier. All very nice! I remember when you cut out the truck next to the cabin. I think I bought that pattern after you posted... I still haven't cut it yet. LOL meflick 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted September 24, 2020 Report Share Posted September 24, 2020 3 hours ago, flarud said: What technique did you use to make the truck? I’m not sure what you mean. But I can tell you the steps to make the pattern. Quote Link to comment Share on other sites More sharing options...
flarud Posted September 27, 2020 Report Share Posted September 27, 2020 On 9/24/2020 at 5:29 AM, Tomanydogs said: I’m not sure what you mean. But I can tell you the steps to make the pattern. Do tell, please. I don't think I have seen that before. Quote Link to comment Share on other sites More sharing options...
Frank Pellow Posted September 28, 2020 Report Share Posted September 28, 2020 The car in this barn is pretty old but newer than 1919. I did get the plate out of a similar barn where my grandfather kept his 1936 Chrysler. Tomanydogs, John B, jbrowning and 4 others 7 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted September 30, 2020 Report Share Posted September 30, 2020 On 8/13/2020 at 5:02 AM, John B said: GTHO Falcon A few other's I have made Love the finish on those. What are you using to get a shine like that. Quote Link to comment Share on other sites More sharing options...
rdatelle Posted September 30, 2020 Report Share Posted September 30, 2020 On 9/21/2020 at 11:11 PM, Ron Johnson said: Been focusing most of my shop time now making toys and will continue for the next few months. Following is what I’ve done earlier. Nice Ron. I wish I could get a finish like that on some of mine. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 30, 2020 Report Share Posted September 30, 2020 Toys never looked better!!! You a master of them!!! Quote Link to comment Share on other sites More sharing options...
John B Posted October 1, 2020 Report Share Posted October 1, 2020 12 hours ago, rdatelle said: Love the finish on those. What are you using to get a shine like that. Clear gloss lacquer. I paint with flat acrylic paint then top coat with two of clear lacquer. Quote Link to comment Share on other sites More sharing options...
lawson56 Posted May 20, 2021 Report Share Posted May 20, 2021 Here are some of my Trucks, jbrowning, RabidAlien, crupiea and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted May 21, 2021 Report Share Posted May 21, 2021 Cool, cool trucks! lawson56 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted May 21, 2021 Report Share Posted May 21, 2021 21 hours ago, Rockytime said: Cool, cool trucks! Thank you. Quote Link to comment Share on other sites More sharing options...
crupiea Posted May 21, 2021 Report Share Posted May 21, 2021 Couple car related ones I did a while back. jbrowning, RabidAlien, ben2008 and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted May 21, 2021 Report Share Posted May 21, 2021 You are indeed an artist. Those are beautiful! Quote Link to comment Share on other sites More sharing options...
jbrowning Posted May 22, 2021 Report Share Posted May 22, 2021 (edited) Here is a motorcycle that I've cut. Made out of oak and maple. Thanks Jim Edited May 22, 2021 by jbrowning John B, RabidAlien and lawson56 3 Quote Link to comment Share on other sites More sharing options...
ben2008 Posted May 23, 2021 Report Share Posted May 23, 2021 (edited) 1934 Ford 3 Window Coupe I did this about 9 years ago Date is incorrect. Should be 6/03/2012 Edited May 23, 2021 by ben2008 jbrowning, munzieb, lawson56 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Rolf Posted June 5, 2021 Report Share Posted June 5, 2021 On 8/20/2020 at 2:27 PM, munzieb said: I used to live in the Poughkeepsie area bud did a lot of business at Macarthur and Farmingdale airports. Moved south in '08. Wasn't there a German restaurant on Lake Ronkonkoma at one time? The Ronkonkoma restaurant was called the Bavarian Inn. Quote Link to comment Share on other sites More sharing options...
munzieb Posted June 5, 2021 Report Share Posted June 5, 2021 55 minutes ago, Rolf said: The Ronkonkoma restaurant was called the Bavarian Inn. Sad ending to a good restaurant for business lunches. I fed many a good customer at Garrett Aviation trading aviation BS stories. Bavarian Inn – Long Island 70s Kid Quote Link to comment Share on other sites More sharing options...
Rolf Posted June 7, 2021 Report Share Posted June 7, 2021 On 6/5/2021 at 6:06 PM, munzieb said: Sad ending to a good restaurant for business lunches. I fed many a good customer at Garrett Aviation trading aviation BS stories. Bavarian Inn – Long Island 70s Kid If I remember correctly one of my sisters had her wedding reception there. Quote Link to comment Share on other sites More sharing options...
Jim Finn Posted June 15, 2021 Report Share Posted June 15, 2021 This is a small cedar box with the Mustang logo inlayed into the hinged lid. Inlayed using my scroll saw with the "double bevel inlay" method. I have done other car logos like this but have no photos of them. John B 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.