Popular Post Rockytime Posted August 30, 2020 Popular Post Report Share Posted August 30, 2020 Thanks to Foxfold aka Brenda for furnishing the pattern. I'm probably the thousandth person to cut this pattern but I have admired it every time I saw it. 1/8" plastic laminated BB, #0 Pike blade, black card stock backer. FrankEV, flarud, OzarkSawdust and 13 others 16 Quote Link to comment Share on other sites More sharing options...
Jim McDonald Posted August 30, 2020 Report Share Posted August 30, 2020 Great work on this one. The laminate really sets it off. Rockytime 1 Quote Link to comment Share on other sites More sharing options...
Woodrush Posted August 30, 2020 Report Share Posted August 30, 2020 1 hour ago, Rockytime said: Thanks to Foxfold aka Brenda for furnishing the pattern. I'm probably the thousandth person to cut this pattern but I have admired it every time I saw it. 1/8" plastic laminated BB, #0 Pike blade, black card stock backer. Great cut Rockytime 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted August 30, 2020 Report Share Posted August 30, 2020 Looks great Les, you did a very good job cutting it! That pattern is on my to do list. What is the finished size? Rockytime 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted August 30, 2020 Author Report Share Posted August 30, 2020 Did not measure it exactly but nearly fills an 8-1/2x11 page. I think the blank I used is 9x11-1/2. Quote Link to comment Share on other sites More sharing options...
wombatie Posted August 30, 2020 Report Share Posted August 30, 2020 Love it, Love it, Love it. To me it would be called Bird On A Tap, I have never heard of a spigot before. Marg John B, Rockytime and amazingkevin 2 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted August 30, 2020 Report Share Posted August 30, 2020 (edited) Happy to have played my part in such a lovely cut. Nice one Les. !! There's another one you know ? Not done as often perhaps but just as nice. A matching pair would be good Edited August 30, 2020 by Foxfold Rockytime 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted August 30, 2020 Report Share Posted August 30, 2020 My goodness you really have been busy Les. I also think you have cut this beautifully. Rockytime 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted August 30, 2020 Report Share Posted August 30, 2020 fantastic job Rockytime 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted August 30, 2020 Report Share Posted August 30, 2020 YOU CHEATED...NO FINISHING Beautiful work!!!! Rockytime 1 Quote Link to comment Share on other sites More sharing options...
smitty0312 Posted August 30, 2020 Report Share Posted August 30, 2020 Looks very very good......all of the elements takes it to the next level A+ Rockytime and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted August 30, 2020 Report Share Posted August 30, 2020 Much desireble project done well!!! Rockytime 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted August 30, 2020 Author Report Share Posted August 30, 2020 14 hours ago, wombatie said: Love it, Love it, Love it. To me it would be called Bird On A Tap, I have never heard of a spigot before. Marg On this side of the pond a tap dispenses beer. I think faucet is used perhaps more than spigot. I'm just old fashioned. wombatie 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted August 30, 2020 Author Report Share Posted August 30, 2020 11 hours ago, Foxfold said: Happy to have played my part in such a lovely cut. Nice one Les. !! There's another one you know ? Not done as often perhaps but just as nice. A matching pair would be good I had not heard of that but would like to see it. Quote Link to comment Share on other sites More sharing options...
Badgerboy Posted August 30, 2020 Report Share Posted August 30, 2020 2 hours ago, Rockytime said: On this side of the pond a tap dispenses beer. I think faucet is used perhaps more than spigot. I'm just old fashioned. I call it a spigot also Les and your piece is beautiful. Rockytime 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted August 31, 2020 Report Share Posted August 31, 2020 4 hours ago, Rockytime said: On this side of the pond a tap dispenses beer. I think faucet is used perhaps more than spigot. I'm just old fashioned. Yep a TAP is for dispensing beer and FAUCET is what dispenses water into a sink...this is really a HOSE COCk...the plumbing term for that thing that sticks out the side of a foundation or on top of a yard hydrant that you attach the hose to. I agree, spigot is an old word that is not much in use these days. Rockytime 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted August 31, 2020 Report Share Posted August 31, 2020 Ok, I’m a plumber. Technically it is called a hose bib. You can call it whatever you want, but I call it a hose bib. Rockytime 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted August 31, 2020 Report Share Posted August 31, 2020 I prefer TAP...but than again, I prefer BEER ! Rockytime 1 Quote Link to comment Share on other sites More sharing options...
Oges Posted August 31, 2020 Report Share Posted August 31, 2020 Lovely clean and crisp cutting Curious about the plastic laminated BB, is it wood or plexi? Rockytime 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted August 31, 2020 Report Share Posted August 31, 2020 16 hours ago, Rockytime said: I had not heard of that but would like to see it. Rockytime and John B 1 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted August 31, 2020 Report Share Posted August 31, 2020 16 hours ago, dgman said: Ok, I’m a plumber. Technically it is called a hose bib. You can call it whatever you want, but I call it a hose bib. When you right you right!!! Rockytime 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted September 1, 2020 Author Report Share Posted September 1, 2020 16 hours ago, Oges said: Lovely clean and crisp cutting Curious about the plastic laminated BB, is it wood or plexi? It is 1/8" BB (wood) but has a thin plastic like lamination on both sides. I don't know the official name of it as I got accidentally when I ordered regular BB. I did not notice it until I got it home. I was surprised. I can't call the dealer for the name of it as I'm hearing impaired and can't use a phone well. Next time I order my wife will make the order and make sure I get the same thing. It cuts beautifully and leaves you with a great finish. Don't have to sand it either. Quote Link to comment Share on other sites More sharing options...
Rockytime Posted September 1, 2020 Author Report Share Posted September 1, 2020 11 hours ago, Foxfold said: Wow! That's quick. I appreciate the pattern. I only have two patterns ahead of it. My current project is the John 3:16 heart I am doing for Christmas. 2023 that is. It's going SLOW. Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 1, 2020 Report Share Posted September 1, 2020 9 hours ago, Rockytime said: Wow! That's quick I have it in my 'library' of patterns Les, so just had to push a few buttons Enjoy, when you have time. xx Rockytime 1 Quote Link to comment Share on other sites More sharing options...
newfie Posted September 1, 2020 Report Share Posted September 1, 2020 Great work Les. I'm with marg on this one up this way it would a tap also. But anything that dispenses liquid is a tap up here. Turn tap and put some water in the sink, beer is on tap, turn on the tap for the garden hose etc. Lolol Rockytime 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.