Popular Post FrankEV Posted September 4, 2020 Popular Post Report Share Posted September 4, 2020 Screaming Eagle Is all 1/8" BB ply and loose set into a Pine custom made 11X14 frame. The original artist is unknown and the cut was made using a photo of another cutting. I really like the Screaming Eagle design but wish I could find a real pattern as the results of cutting from a photo is poor and there is some distortion. My cutting using spiral blades for the flag areas was a mistake as it is raggered at best. I decided to add color to the flag and had the cutting been better I think adding color to the flag was a good idea. The raggered cutting was not quite as evident untill the color was added. Will probably hang this somewhere in the workshop to remind me to be more careful on blade selection. The Eagle Feather is cut from 3/8" thk solid Oak over a 1/8" BB ply backer and mounted of a painted black backer and fixed into a custom made 16X8 Oak frame. Pattern from Steve Good's Scrollsaw Workshop website. danny, flarud, amazingkevin and 9 others 12 Quote Link to comment Share on other sites More sharing options...
meflick Posted September 4, 2020 Report Share Posted September 4, 2020 (edited) Nice work. Perhaps someone here will know where to send you for the real pattern on the screaming eagle. It seems I have seen it somewhere but have no idea where and I wouldn't have downloaded it so I don't have it to look and see. This may be it perhaps: https://woodenteddybear.com/collections/military-patriotic/products/tbp2685-screaming-eagle-in-flag Edited September 4, 2020 by meflick FrankEV 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted September 4, 2020 Author Report Share Posted September 4, 2020 2 hours ago, meflick said: This may be it perhaps: https://woodenteddybear.com/collections/military-patriotic/products/tbp2685-screaming-eagle-in-flag Looks like that is the source. They aren't very informative. They dont say if it is a real pattern or just a .jpg. Guess I'll have to spend $6.50 to find out. I'm supprised I did not see it on their site before as I have looked through their offerings a few times. They have a few more "Eagles" I like. Thanks meflick 1 Quote Link to comment Share on other sites More sharing options...
rjR Posted September 4, 2020 Report Share Posted September 4, 2020 2 great projects. Quote Link to comment Share on other sites More sharing options...
Dragonkort Posted September 4, 2020 Report Share Posted September 4, 2020 love them both espicaly the eagle in the feather danny 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 4, 2020 Report Share Posted September 4, 2020 2 hours ago, FrankEV said: They dont say if it is a real pattern or just a .jpg. I find that most 'download' patterns give you a choice of what format you want them in. svg-pdf etc, either way you can 'convert' what you get to what you want on the internet at no cost. danny 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted September 4, 2020 Author Report Share Posted September 4, 2020 27 minutes ago, Foxfold said: I find that most 'download' patterns give you a choice of what format you want them in. svg-pdf etc, either way you can 'convert' what you get to what you want on the internet at no cost. I checked with them. They only supply a paper copy in B&W lines and shaded areas. IK ordersd some and will scan them into my PC for safe keeping. I found some really advanced cuts that I might try. meflick 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 5, 2020 Report Share Posted September 5, 2020 Fabulous scrolling!!! Quote Link to comment Share on other sites More sharing options...
Rockytime Posted September 5, 2020 Report Share Posted September 5, 2020 Great job! Adding the color makes it really pop. Corners on your frames look good too. That's always my biggest challenge. Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 5, 2020 Report Share Posted September 5, 2020 They look terrific, great work. Marg Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted September 5, 2020 Report Share Posted September 5, 2020 Very nicely cut and finished. Quote Link to comment Share on other sites More sharing options...
FrankEV Posted September 5, 2020 Author Report Share Posted September 5, 2020 7 hours ago, Rockytime said: Great job! Adding the color makes it really pop. Corners on your frames look good too. That's always my biggest challenge. I purchased a precision hand miter saw set up to make good miters (https://www.garrettwade.com/fast-safe-accurate-mitre-saw.html). I did not want to spend a lot of money for a very precise power miter saw. I do not have a good place to use it anyway.. Quote Link to comment Share on other sites More sharing options...
Clayton717 Posted September 5, 2020 Report Share Posted September 5, 2020 Great job on both cuts Quote Link to comment Share on other sites More sharing options...
daveww1 Posted September 5, 2020 Report Share Posted September 5, 2020 very nice job Quote Link to comment Share on other sites More sharing options...
Roberta Moreton Posted September 6, 2020 Report Share Posted September 6, 2020 On 9/4/2020 at 1:09 PM, FrankEV said: Looks like that is the source. They aren't very informative. They dont say if it is a real pattern or just a .jpg. Guess I'll have to spend $6.50 to find out. I'm supprised I did not see it on their site before as I have looked through their offerings a few times. They have a few more "Eagles" I like. Thanks I have ordered many of their patterns with no issues. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.