poupster2 Posted September 4, 2020 Report Share Posted September 4, 2020 I've seen an add from someone selling an old Excalibur by Somerville 30" for $125. It is in working condition. I already have plenty of Dewalts Type 1 (2) that I acquired and serviced and lately Got a Brand New Seyco that I Love. Is this saw worth it or not? amazingkevin, OCtoolguy and jbrowning 3 Quote Link to comment Share on other sites More sharing options...
dgman Posted September 4, 2020 Report Share Posted September 4, 2020 That saw was made by Summerville Designs in Canada, who also designed and built the DeWALT type 1. If it is in good working order, it might be worth the $125. Keep in mind, it had been out of production for about twenty years, so there are no replacement parts available. I can’t tell by the picture, but does it have a motor? If it had a motor it might be worth it. If not, you have to factor that. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted September 4, 2020 Report Share Posted September 4, 2020 I can see it now, it does have a motor. It also has an optional foot pedal to raise the top arm for easy top feeding. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted September 4, 2020 Report Share Posted September 4, 2020 Probably worth it if everything is working order.. There is also one of these on Craigslist here in MI for $100 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 4, 2020 Report Share Posted September 4, 2020 2 hours ago, poupster2 said: I've seen an add from someone selling an old Excalibur by Somerville 30" for $125. It is in working condition. I already have plenty of Dewalts Type 1 (2) that I acquired and serviced and lately Got a Brand New Seyco that I Love. Is this saw worth it or not? What is your goal? Is it just a project to restore or are you thinking of using it as a full time saw? Parts are not available from what I have heard so you will have to either make your own or spend a lot of time finding a source. For me, it's a NOT! Quote Link to comment Share on other sites More sharing options...
Frank Pellow Posted September 4, 2020 Report Share Posted September 4, 2020 (edited) It's a tremendous bargain for $125. I have, exactly, that saw and would not accept less than $1,000 for it. It's a great saw that I have used extensively for 16 years and I have no problems in getting the (very few) parts that I needed for it. Edited September 4, 2020 by Frank Pellow poupster2, stoney, OCtoolguy and 4 others 5 2 Quote Link to comment Share on other sites More sharing options...
poupster2 Posted September 23, 2020 Author Report Share Posted September 23, 2020 Well, I did it, for $120 I got the Excalibur from 1998 (with Seyco's Bill of sale) and a Hegner Multimax -2 (that needs a lot of TLC). I think I did good! OCtoolguy and jbrowning 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 23, 2020 Report Share Posted September 23, 2020 2 hours ago, poupster2 said: Well, I did it, for $120 I got the Excalibur from 1998 (with Seyco's Bill of sale) and a Hegner Multimax -2 (that needs a lot of TLC). I think I did good! That sounds like you did very well. How did you get the Hegner? No mention of it in your OP. GrampaJim 1 Quote Link to comment Share on other sites More sharing options...
poupster2 Posted September 28, 2020 Author Report Share Posted September 28, 2020 On 9/23/2020 at 2:06 PM, octoolguy said: That sounds like you did very well. How did you get the Hegner? No mention of it in your OP. There was no mention of it anywhere in the add. So I offered $100 for the Excalibur and He came back with $120 + the Hegner. I was totally surprised by the offer and I accepted it! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 29, 2020 Report Share Posted September 29, 2020 On 9/28/2020 at 6:40 AM, poupster2 said: There was no mention of it anywhere in the add. So I offered $100 for the Excalibur and He came back with $120 + the Hegner. I was totally surprised by the offer and I accepted it! A very good deal for sure. Congrats. The Gods shown down on you. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 30, 2020 Report Share Posted September 30, 2020 On 9/4/2020 at 3:43 PM, Frank Pellow said: It's a tremendous bargain for $125. I have, exactly, that saw and would not accept less than $1,000 for it. It's a great saw that I have used extensively for 16 years and I have no problems in getting the (very few) parts that I needed for it. Boy, let's negotiate on the price Frank,lol that,s my saw!!! Kidding but I do crave one!! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.