Popular Post FrankEV Posted September 14, 2020 Popular Post Report Share Posted September 14, 2020 (edited) Me and my spiral bades got together again to produce this 11" x 14" Charles Hand Pattern having 260 holes. Both layers 5/32" thick solid core ply (top maple, bottom walnut stained a deep walnut). Pegas 2/0 spiral blades throught out except for a Pegas #5 MGT for the lower area perrimeter straight line edge cut hidden under frame. Panel finished with multiple coats of high gloss lacquar and installed loose fit in a store bought frame. Managed to do all the cutouts with only one minor break through between adjacent cuts. I actually found I could stay on the lines fairly well. Of course, there are really no smooth line cuts so who will know the difference anyway. Cutting time overall around 12 hours, but most of that time was used threading the blade through the holes. Of course I did use about 15 blades as the threading would oftern kink the blade and then, within one or two more cuts, "snap" another blade breaks. Edited September 14, 2020 by FrankEV RabidAlien, Woodrush, jollyred and 13 others 13 3 Quote Link to comment Share on other sites More sharing options...
GusGustin Posted September 14, 2020 Report Share Posted September 14, 2020 WHOA .. he's staring right at me !!! Makes me think I'm dinner !!!! Great job ! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 14, 2020 Report Share Posted September 14, 2020 Brilliant, I love it. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted September 14, 2020 Report Share Posted September 14, 2020 Great looking carnivore! Did you not get nervous cutting it? Good job! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Woodrush Posted September 14, 2020 Report Share Posted September 14, 2020 3 hours ago, FrankEV said: Me and my spiral bades got together again to produce this 11" x 14" Charles Hand Pattern having 260 holes. Both layers 5/32" thick solid core ply (top maple, bottom walnut stained a deep walnut). Pegas 2/0 spiral blades throught out except for a Pegas #5 MGT for the lower area perrimeter straight line edge cut hidden under frame. Panel finished with multiple coats of high gloss lacquar and installed loose fit in a store bought frame. Managed to do all the cutouts with only one minor break through between adjacent cuts. I actually found I could stay on the lines fairly well. Of course, there are really no smooth line cuts so who will know the difference anyway. Cutting time overall around 12 hours, but most of that time was used threading the blade through the holes. Of course I did use about 15 blades as the threading would oftern kink the blade and then, within one or two more cuts, "snap" another blade breaks. Nice work. I love Charles Hand patterns FrankEV 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted September 14, 2020 Report Share Posted September 14, 2020 This. Is. AWESOME!!!!! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted September 14, 2020 Report Share Posted September 14, 2020 That is Down Right AWESOME!!!!Love the Eagles. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted September 14, 2020 Report Share Posted September 14, 2020 Great looking project Frank! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted September 15, 2020 Report Share Posted September 15, 2020 Great job! I really like that pattern. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted September 15, 2020 Report Share Posted September 15, 2020 Wow. You don’t want to mess with him!!! Very very nice job cutting this. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 15, 2020 Report Share Posted September 15, 2020 He is one angry bird. Awesome work Frank. Marg FrankEV 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted September 15, 2020 Report Share Posted September 15, 2020 fantastic job FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Dragonkort Posted September 15, 2020 Report Share Posted September 15, 2020 just beautiful! and very reallistic!!! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 15, 2020 Report Share Posted September 15, 2020 Your skills are astounding me daily!!!! Keep you fantastic work coming!!!! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted September 15, 2020 Report Share Posted September 15, 2020 marvelous job. It is a really cool piece. I love it. Dick heppnerguy FrankEV 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted September 16, 2020 Report Share Posted September 16, 2020 Excellent work. Amazing detail. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted September 18, 2020 Report Share Posted September 18, 2020 Great job from a fantastic pattern! Thanks for sharing and God Bless! Spirithorse FrankEV 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.