wombatie Posted November 17, 2020 Report Share Posted November 17, 2020 Everyone's been asking what I want for Christmas and my answers been the same to all of them, I don't know.........Well I do now, a new drill press, because mine died today, big time, luckily we have a bigger one that I can use I just need a step so that I can see where I'm drilling. Marg meflick, RabidAlien, John B and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted November 17, 2020 Report Share Posted November 17, 2020 I hope Santa Terry gets that for you! OCtoolguy and wombatie 2 Quote Link to comment Share on other sites More sharing options...
John B Posted November 17, 2020 Report Share Posted November 17, 2020 (edited) Marg, Be specific, "Dear Santa, I would love a variable speed drill press for Christmas and I promise to be better next year" This is the one I have, but, alas, it is discontinued Edited November 17, 2020 by John B wombatie, OzarkSawdust and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted November 17, 2020 Report Share Posted November 17, 2020 All you have to do is ask, and Santa will bring it. At least that was what I was told OCtoolguy, wombatie and WayneMahler 3 Quote Link to comment Share on other sites More sharing options...
ike Posted November 17, 2020 Report Share Posted November 17, 2020 Be sure to ask for one that holds the smallest drill you ever use, wiht a deep throat. mine is a 10 inch and some times I have to use a plung router. IKE OCtoolguy and wombatie 2 Quote Link to comment Share on other sites More sharing options...
Rolf Posted November 17, 2020 Report Share Posted November 17, 2020 Marg, how generous do think Santa will be? John B is that a reeves drive? Or electronic speed control? John B and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted November 17, 2020 Report Share Posted November 17, 2020 I would like larger planer. My wife ask me when she bought a jointer if that was the last tool I needed. Of course I said yes. Since the jointer I have gotten a router table and lift, a new scrollsaw, 2nd 14" bandsaw, lathe and a grinder so I stretched the truth a little bit. OCtoolguy, wombatie and meflick 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 17, 2020 Report Share Posted November 17, 2020 It's too bad that first you don't live close to me and second, you weren't in need a month ago. I bought a larger drill press and sold my small one. wombatie 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 17, 2020 Report Share Posted November 17, 2020 2 hours ago, Woodmaster1 said: I would like larger planer. My wife ask me when she bought a jointer if that was the last tool I needed. Of course I said yes. Since the jointer I have gotten a router table and lift, a new scrollsaw, 2nd 14" bandsaw, lathe and a grinder so I stretched the truth a little bit. She should have known by now that that was a silly question. No crafts-person will ever have enough tools. wombatie 1 Quote Link to comment Share on other sites More sharing options...
Woodrush Posted November 18, 2020 Report Share Posted November 18, 2020 Ask for the seyco drill Quote Link to comment Share on other sites More sharing options...
Rockytime Posted November 18, 2020 Report Share Posted November 18, 2020 I'd be satisfied with a little health improvement for my wife and I. Rolf, wombatie, spirithorse and 2 others 5 Quote Link to comment Share on other sites More sharing options...
meflick Posted November 18, 2020 Report Share Posted November 18, 2020 Marge, I hope Santa delivers. I know about the need for a stool at the drill press. wombatie 1 Quote Link to comment Share on other sites More sharing options...
John B Posted November 18, 2020 Report Share Posted November 18, 2020 (edited) @Rolf It's a Reeves drive mate. When I got it there wasn't any electronic ones that kept torque at low speeds unless you gave them your 1st born in exchange . Actually sometimes I think it wouldn't have been such a bad deal Edited November 18, 2020 by John B Rolf 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted November 18, 2020 Report Share Posted November 18, 2020 1 hour ago, Rockytime said: I'd be satisfied with a little health improvement for my wife and I. @Rockytime I would be extremely happy if my wife and I saw improvements in our health also. Prayers said for you and your wife and I would appreciate prayers for us. God Bless! Spirithorse Quote Link to comment Share on other sites More sharing options...
spirithorse Posted November 18, 2020 Report Share Posted November 18, 2020 Marg, Sorry to hear that your drill press died. I hope you pick the one out that really satisfies your requirements. God Bless! Spirithorse wombatie 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted November 18, 2020 Report Share Posted November 18, 2020 7 minutes ago, spirithorse said: @Rockytime I would be extremely happy if my wife and I saw improvements in our health also. Prayers said for you and your wife and I would appreciate prayers for us. God Bless! Spirithorse Prayers going up my friend! Quote Link to comment Share on other sites More sharing options...
wombatie Posted November 18, 2020 Author Report Share Posted November 18, 2020 I only need a small one, that sits on the bench, we have two large ones, but like I said I need a box to stand on to use them, (Bit short in the leg department ). We will go out the weekend and see what's available. Marg John B 1 Quote Link to comment Share on other sites More sharing options...
Rolf Posted November 18, 2020 Report Share Posted November 18, 2020 12 hours ago, Rockytime said: I'd be satisfied with a little health improvement for my wife and I. AMEN Rockytime, Of course health is the #1 wish #2 world peace. And then come the toys. JohnB the mechanical Reves drive machines are not all that cheap either. John B 1 Quote Link to comment Share on other sites More sharing options...
ike Posted November 18, 2020 Report Share Posted November 18, 2020 I have a Porter cable 10" and it will handle a 1.2 Mm reill bit. IKE Quote Link to comment Share on other sites More sharing options...
ike Posted November 18, 2020 Report Share Posted November 18, 2020 BOSCH makes an adaptor that handles drill bits 1MM -12MM Quote Link to comment Share on other sites More sharing options...
John B Posted November 19, 2020 Report Share Posted November 19, 2020 @Rolf You are correct mate, but at the time i was a better deal and it was available in Kalgoorlie, which makes it a winner as otherwise a hundred plus bucks for transportation would of been added. And I was totally sick of changing belts to change speeds. Quote Link to comment Share on other sites More sharing options...
Rolf Posted November 19, 2020 Report Share Posted November 19, 2020 John I did a fair amount of metal work this year and burned up a couple of bits because I was too LAZY to change the belt. Quote Link to comment Share on other sites More sharing options...
Rockytime Posted November 19, 2020 Report Share Posted November 19, 2020 3 hours ago, Rolf said: John I did a fair amount of metal work this year and burned up a couple of bits because I was too LAZY to change the belt. I can relate, that's why I kept my mill. Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted November 19, 2020 Report Share Posted November 19, 2020 On 11/18/2020 at 9:15 AM, Rolf said: Of course health is the #1 wish #2 world peace. I'd like to see a Covid vaccine in the top 3. Rolf and meflick 2 Quote Link to comment Share on other sites More sharing options...
Rolf Posted November 19, 2020 Report Share Posted November 19, 2020 1 hour ago, Rockytime said: I can relate, that's why I kept my mill. I wish I had room for an old Bridgeport. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.