Popular Post Scrappile Posted November 18, 2020 Popular Post Report Share Posted November 18, 2020 (edited) Well, for some reason, around last may, I decided I needed a break from scrolling.... I think I kinda got burned out and I also had neglected other important things because of the hobby. Anyway... I did check in here once in a while just to see what was going on in the scrolling world... A couple weeks ago, I spotted a post by @heppnerguy of a cutting he had done of a Fiona Kingdon patter that was in the last issue of SSW. I really loved what he had done. I don't take the magazine anymore and thought about ordering the issue,,, but with the cost of the mag and shipping... na, I think not. A couple days latter, I was at a grocery store with my wife, and we were by the magazine rack and there, the first thing I saw was the latest issue of SSW. I thought it must be an omen! So I bought it. Just finished cutting the pattern yesterday. I wasn't sure I would make it through the cutting because it has been a while and it is not a simple pattern. But, I did and am happy with the results... I haven't applied a finish yet. I think I want to dip it and then spray with Deft Clear coat, but I also want to plan around with a stain glass for a backer.... I don't have any stain glass so I will have to learn something about that. I cut it in 1/2" Beech. By the way, I did really miss the form, I am going to limit my time spent here, but very happy to be somewhat involved again... I have browsed around some and see some great projects have been done. Edited November 23, 2020 by Scrappile Old Joe, heppnerguy, FrankEV and 16 others 19 Quote Link to comment Share on other sites More sharing options...
meflick Posted November 18, 2020 Report Share Posted November 18, 2020 Hi Paul and welcome home. Good to hear you have been well and just put your attentions elsewhere for a while. I understand about getting burned out. Glad you found the magazine locally and were able to get the pattern and give it ago, looks like you never missed anytime from the saw. Beautiful piece. Not sure if there are any hobby or craft stores in your area, but you could check there for stained glass. I know Hobby Lobby carries it. Of course, there is always Amazon no doubt. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted November 18, 2020 Report Share Posted November 18, 2020 Welcome back Paul. I think that piece is stunningly beautiful. You have lost none of your 'touch' with a saw. !! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
rjR Posted November 18, 2020 Report Share Posted November 18, 2020 Gorgeous work from the north of WA. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted November 18, 2020 Report Share Posted November 18, 2020 Hi Paul. Ill be taking a break for about 5 months because I'm moving to Florida in march and all my tools and saws are in florida already.I'm building a house and it won't be ready until then. I do like the piece you cut though. Scrappile and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
trackman Posted November 18, 2020 Report Share Posted November 18, 2020 I am lucky if I need stained glass I go into my wife’s studio. That is what she does. Scrappile, meflick and amazingkevin 3 Quote Link to comment Share on other sites More sharing options...
rjweb Posted November 19, 2020 Report Share Posted November 19, 2020 Paul. that is beautiful you have not lost your touch, RJ Scrappile 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted November 19, 2020 Report Share Posted November 19, 2020 welcome back, beautiful job Scrappile 1 Quote Link to comment Share on other sites More sharing options...
alexfox Posted November 19, 2020 Report Share Posted November 19, 2020 Nice project! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
ben2008 Posted November 19, 2020 Report Share Posted November 19, 2020 Excellent Scrappile 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted November 19, 2020 Report Share Posted November 19, 2020 Glad to see you back on here again. I do not think you will be able to stay away very long as there are just too many great people here and it is so easy to miss them all when one decides too be absent for awhile. We are going to Oregon on December 6th but will not have a car, so I most likely will not have the opportunity to go see you this time, as I always try to do when in Heppner. It will be a short visit and we will probably be doing some family Christmas time then. I will try to give you a call and at least chat with you some. Nicely done piece, as usual. I made another one for Sharon for our anniversary, which was yesterday. I did a little colorization to bring out the flowers within the leaves but decided not to do the leaves, as I was planning to do because I am not talented in that field at all. I did miss one of the cuts in one of the birds, just overlooked it and luckily I even missed it in my hole drilling. You and Patti have a nice holiday season.. Dick Scrappile 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted November 20, 2020 Report Share Posted November 20, 2020 Beautiful work, Paul! Nice to see you back on the forum and I assure you, you have been missed! Thanks for sharing and God Bless! Spirithorse Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Woodrush Posted November 20, 2020 Report Share Posted November 20, 2020 On 11/18/2020 at 4:13 PM, Scrappile said: Well, for some reason, around last may, I decided I needed a break from scrolling.... I think I kinda got burned out and I also had neglected other important things because of the hobby. Anyway... I did check in here once in a while just to see what was going on in the scrolling world... A couple weeks ago, I spotted a post by @heppnerguy of a cutting he had done of a Fiona Kingdon patter that was in the last issue of SSW. I really loved what he had done. I don't take the magazine anymore and thought about ordering the issue,,, but with the cost of the mag and shipping... na, I think not. A couple days latter, I was at a grocery store with my wife, and we were by the magazine rack and there, the first thing I saw was the latest issue of SSW. I thought it must be an omen! So I bought it. Just finished cutting the pattern yesterday. I wasn't sure I would make it through the cutting because it has been a while and it is not a simple pattern. But, I did and am happy with the results... I haven't applied a finish yet. I think I want to dip it and then spray with Deft Clear coat, but I also want to plan around with a stain glass for a backer.... I don't have any stain glass so I will have to learn something about that. I cut it in 1/2" oak. By the way, I did really miss the form, I am going to limit my time spent here, but very happy to be somewhat involved again... I have browsed around some and see some great projects have been done. Great cut Paul Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted November 20, 2020 Report Share Posted November 20, 2020 Good to hear from you Paul! Great looking piece. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted November 20, 2020 Report Share Posted November 20, 2020 It good to see you again. I must admit I have been checking to see if you have been visiting, I was going to send you a message but then I got sidetracked. Hope you are keeping well. That's a great looking plaque, you have not lost your touch. Marg Scrappile 1 Quote Link to comment Share on other sites More sharing options...
ike Posted November 20, 2020 Report Share Posted November 20, 2020 nice you didn't loose your touck. IKE Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Old Joe Posted November 21, 2020 Report Share Posted November 21, 2020 Paul, great job on the cutting. Getting detail like that in 1/2” Oak takes a lot of patience. I have nothing against Baltic Birch, it has its place, but I really love the look and the soul of solid wood. Fiona’s work, and designs, are in a class of their own. She never uses patterns! She “sees” things in a piece of lumber and brings the image in her mind to life. I bought a Green Man pattern from her last year, cut it out of nominal 1” Red Oak, and backed it with stained glass. I used to cut a lot of glass, but rarely do it anymore. If we weren’t on total opposite sides of the continent I would happily cut your backing for you. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
namunolie Posted November 21, 2020 Report Share Posted November 21, 2020 Welcome back That is beautiful work Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Frank Pellow Posted November 22, 2020 Report Share Posted November 22, 2020 (edited) Paul you did a great job on Fiona's pattern. I know what I am talking about because I am, right now, attempting to cut it out of 3cm thick Spalted Maple and it's a real effort. I very much approve your intention to back it with glass. That's also what I intend to do. In the past, I have backed a few of Fiona's patterns with glass and they look great. I'm attaching a photo of one of them: Edited November 22, 2020 by Frank Pellow meflick 1 Quote Link to comment Share on other sites More sharing options...
GPscroller Posted November 22, 2020 Report Share Posted November 22, 2020 Welcome back Paul, was wondering what had become of you my friend. Superb cutting as always, Jeff Scrappile 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted November 23, 2020 Author Report Share Posted November 23, 2020 On 11/21/2020 at 4:44 AM, Old Joe said: Paul, great job on the cutting. Getting detail like that in 1/2” Oak takes a lot of patience. I have nothing against Baltic Birch, it has its place, but I really love the look and the soul of solid wood. Fiona’s work, and designs, are in a class of their own. She never uses patterns! She “sees” things in a piece of lumber and brings the image in her mind to life. I bought a Green Man pattern from her last year, cut it out of nominal 1” Red Oak, and backed it with stained glass. I used to cut a lot of glass, but rarely do it anymore. If we weren’t on total opposite sides of the continent I would happily cut your backing for you. Yep, I am a big fan of Ms. Kingdon. I did the Bearded Viking one and now working on the "Entertwined Trees Heart". I have several other of her patterns. I said I did the one I posted here in Oak, but I didn't feel that was right,,, the wood just cut too easily for oak. Did some research and I am now sure it is a beech board I purchased from Cherokee Woods in Calif. Nice cutting wood. Looks sorta like red oak but softer and a little more pinkish. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 6, 2020 Report Share Posted December 6, 2020 This is a hold your breath cutting I would not attempt. You haven,t lost your touch at all!!! Scrappile 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.