Jump to content
🎄 🎄 🎄 Ornaments For Charity 2024 - 545 FREE Ornament Patterns - NOW AVAILABLE! ×

Flying Eagle


Rockytime

Recommended Posts

1 hour ago, dgman said:

Beautiful rendition of a Steve Good pattern Les! I have cut two of them. Be warned that it is extremely fragile, especially where the upright of the stand meets the body. DAHIKT.

Thank you. Being aware of this I cut the outside leaving the narrow connection for the last.

Link to comment
Share on other sites

On 1/2/2021 at 7:18 PM, preprius said:

How do you professionals do this?

It would take me 60 hours to do that.

That presentation is great. It can be givin out as a trophy.  

I used a #7scroll reverse in walnut for most of the ones I've done! make sure your blade is running true as some, or a lot of cuts are thin and if the blade is not almost perfectly running parallel to the table the bottoms of the thin cuts end up destroy. it will leave the wood slivers in a V shape.

Link to comment
Share on other sites

On 1/2/2021 at 7:18 PM, preprius said:

How do you professionals do this?

It would take me 60 hours to do that.

That presentation is great. It can be givin out as a trophy.  

I used a #7scroll reverse in walnut for most of the ones I've done! make sure your blade is running true as some, or a lot of cuts are thin and if the blade is not almost perfectly running parallel to the table the bottoms of the thin cuts end up destroy. it will leave the wood slivers in a V shape.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...