Popular Post RabidAlien Posted January 7, 2021 Popular Post Report Share Posted January 7, 2021 Fresh off the saw. Stack cut this one, really happy with the results. Pegas #3MG blades. new2woodwrk, ChelCass, amazingkevin and 14 others 17 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted January 7, 2021 Report Share Posted January 7, 2021 fantastic job RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
John B Posted January 7, 2021 Report Share Posted January 7, 2021 Beautiful cutting RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted January 7, 2021 Report Share Posted January 7, 2021 Gorgeous. I really must try those mg blades. RabidAlien and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted January 7, 2021 Author Report Share Posted January 7, 2021 1 minute ago, Foxfold said: Gorgeous. I really must try those mg blades. Much less tearout on the bottom piece! Flying Dutchman makes some as well. The big difference is that on the Pegas, the bottom 1/4 of the blade has the teeth reversed, whereas the FD blades have every other tooth reversed. I like the FD concept, as once it gets dull I can flip the blade over and use what was the top portion. It seemed to me, though, that the FD blades didn't cut a straight line....I mean, they'd cut straight, but only if you were sitting slightly off the saw's centerline. Once you figure out which direction it wanted to pull, it wasn't a big deal but when I sit in front of my saw I'm typically in line with the arm and disliked having to remember to move over. Also, it seemed to me that the FD reverse blades dulled a lot faster than the Pegas. But that's just my opinion....that and $5.75 will get you a small cup of coffee somewhere. LOL Foxfold and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted January 8, 2021 Report Share Posted January 8, 2021 What a beautiful piece. You did an awesome job, well done. Marg RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted January 8, 2021 Report Share Posted January 8, 2021 Beautiful job. Great subject. What is the panel size and was that 3 at 1/4" of 3 at 1/8"? To me, that seems to be a large blade for such an intricate cut, but if a 3/4" stack I guess I can see why. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 8, 2021 Report Share Posted January 8, 2021 Nice cutting! I hope you will post the finished one.. It going to be a real eye catcher... Sorry but I had to smile at your comment about having to move over a little towards the side of your saw to cut a straight line... really? You can't just turn the wood a little to compensate for the drift..? So when you cut a corner or circle, do you have to walk around your saw as you cut it??? I know what you mean, but, got a picture of it in my mind and it made me chuckle a little... RabidAlien and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted January 8, 2021 Author Report Share Posted January 8, 2021 1 hour ago, Scrappile said: Nice cutting! I hope you will post the finished one.. It going to be a real eye catcher... Sorry but I had to smile at your comment about having to move over a little towards the side of your saw to cut a straight line... really? You can't just turn the wood a little to compensate for the drift..? So when you cut a corner or circle, do you have to walk around your saw as you cut it??? I know what you mean, but, got a picture of it in my mind and it made me chuckle a little... LOL I did try pushing the wood from an angle, but it just felt....off. And that arm got tired pretty quickly. So, yeah....laziness kicked in and I moved my chair. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
flarud Posted January 8, 2021 Report Share Posted January 8, 2021 Very cool looking! RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
Ken Lotts Posted January 8, 2021 Report Share Posted January 8, 2021 Nicely cut. RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted January 11, 2021 Author Report Share Posted January 11, 2021 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 11, 2021 Report Share Posted January 11, 2021 MIGHTY,, FINE! RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.