Popular Post Danj84 Posted January 11, 2021 Popular Post Report Share Posted January 11, 2021 Tiger& Cubs pattern Made using 1/4 inch Baltic birch plywood ,and black mount board for backer, used a number 2/0 spiral blade,lots of holes on this one with very small intricate cutting took me about 18-20hours to cut but I think it turned out well just need to finish sanding and stain it and it’s good to go all feedback appreciate thanks Dan Smudger, meflick, heppnerguy and 22 others 25 Quote Link to comment Share on other sites More sharing options...
edward Posted January 11, 2021 Report Share Posted January 11, 2021 Very nice cutting and a lot of small holes, great job. Danj84 1 Quote Link to comment Share on other sites More sharing options...
danny Posted January 11, 2021 Report Share Posted January 11, 2021 Lots of Time in this one, but So nice and Clean cuts looking. Well worth Framing and Hanging. Danny :+} Danj84 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 11, 2021 Report Share Posted January 11, 2021 Very well done! Danj84 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted January 11, 2021 Report Share Posted January 11, 2021 Nice one !! Danj84 1 Quote Link to comment Share on other sites More sharing options...
GusGustin Posted January 11, 2021 Report Share Posted January 11, 2021 YOU THINK IT TURNED OUT WELL? It turned out FANTASTIC !!! Danj84 1 Quote Link to comment Share on other sites More sharing options...
Danj84 Posted January 11, 2021 Author Report Share Posted January 11, 2021 9 minutes ago, GusGustin said: YOU THINK IT TURNED OUT WELL? It turned out FANTASTIC !!! Thank you very much it did take a lot longer than anticipated but it was worth it cheers Dan Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted January 11, 2021 Report Share Posted January 11, 2021 That is a superb cutting on a delicate project. What is the size? Danj84 1 Quote Link to comment Share on other sites More sharing options...
Danj84 Posted January 11, 2021 Author Report Share Posted January 11, 2021 33 minutes ago, Denny Knappen said: That is a superb cutting on a delicate project. What is the size? Hi Denny , hope your well , thank you . it is done on a 1/4 inch A4 piece of Baltic birch plywood . cheers Dan John B 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted January 11, 2021 Report Share Posted January 11, 2021 Excellent! Danj84 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted January 11, 2021 Report Share Posted January 11, 2021 Great job on that. I can see where there's a lot of bit changes. Danj84 1 Quote Link to comment Share on other sites More sharing options...
Danj84 Posted January 12, 2021 Author Report Share Posted January 12, 2021 8 hours ago, rdatelle said: Great job on that. I can see where there's a lot of bit changes. Thank you,yes some of the holes were so close together especially round the Cubs faces but just took my time and went real slow!!! cheers Dan amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted January 12, 2021 Report Share Posted January 12, 2021 terrific job, it's beautiful Danj84 1 Quote Link to comment Share on other sites More sharing options...
stoney Posted January 12, 2021 Report Share Posted January 12, 2021 Beautiful job, that once again proves excellent work can be produced with spiral blades. Thanks for showing us your fine project. Danj84 and heppnerguy 1 1 Quote Link to comment Share on other sites More sharing options...
Danj84 Posted January 12, 2021 Author Report Share Posted January 12, 2021 1 hour ago, stoney said: Beautiful job, that once again proves excellent work can be produced with spiral blades. Thanks for showing us your fine project. Thank you very much stoney,I used to hate working with spiral blades it took me ages to get used to them I only went back to them about 6months ago and perseverance has paid off I love using them now cheers Dan stoney and heppnerguy 2 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted January 12, 2021 Report Share Posted January 12, 2021 Only an obsessed scroller would chose to cut this one!!!! Danj84 1 Quote Link to comment Share on other sites More sharing options...
Danj84 Posted January 12, 2021 Author Report Share Posted January 12, 2021 38 minutes ago, amazingkevin said: Only an obsessed scroller would chose to cut this one!!!! I did have second thoughts half way through if I’m honest I had been cutting forever and not seeming to get anywhere near finished lol!! But it was worth persevering as I am happy with the end result,nice and simple one next I think cheers Dan Quote Link to comment Share on other sites More sharing options...
FrankEV Posted January 12, 2021 Report Share Posted January 12, 2021 Everyone has said it already, but it is worth repeating...great cutting. Those spirals work great once you get used to them. The subject is beautiful but the pattern itself is very busy. It took me quite a few minutes before I actually saw the second cub below mamas jaw. You said you still had to stain and finish the panel so, and this is only my suggestion, you might want to consider selectively highlighting the lion and cubs and/or jpossibly just darken the background a tad to enhance the viewability of the piece. Danj84 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted January 12, 2021 Report Share Posted January 12, 2021 It’s a great cut. Well done. Danj84 1 Quote Link to comment Share on other sites More sharing options...
Smudger Posted January 12, 2021 Report Share Posted January 12, 2021 Holy wow, that is absolutely awesome, much kudos to you on cutting this dude Danj84 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted January 13, 2021 Report Share Posted January 13, 2021 Nice project. Spiral are worth learning if one is interested in complex fret work. I have tried them off and on and I find I go for them with fret work of this detail. Sure make life a lot less tense when I do. I did one similar to this with pattern from Sam Custodio. I find fret patterns that take a long time to cut are so worth the time spent, as one feels they have achieved something everyone will be amazed when they see it and makes the craftsman feel proud inside. GREAT PROJECT Dick heppnerguy Danj84 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted January 13, 2021 Report Share Posted January 13, 2021 Oh my that is one excellent looking piece. Well done. Marg Danj84 1 Quote Link to comment Share on other sites More sharing options...
John B Posted January 13, 2021 Report Share Posted January 13, 2021 Fanbloodytastic Dan. that sure is complex and delicate piece. Danj84 1 Quote Link to comment Share on other sites More sharing options...
Danj84 Posted January 13, 2021 Author Report Share Posted January 13, 2021 20 hours ago, FrankEV said: Everyone has said it already, but it is worth repeating...great cutting. Those spirals work great once you get used to them. The subject is beautiful but the pattern itself is very busy. It took me quite a few minutes before I actually saw the second cub below mamas jaw. You said you still had to stain and finish the panel so, and this is only my suggestion, you might want to consider selectively highlighting the lion and cubs and/or jpossibly just darken the background a tad to enhance the viewability of the piece. Hi Frank, I know exactly what you mean it is a very busy looking pattern so I will definitely go with your suggestion and do the tiger and Cubs a different stain so they stand out more ,thank you very much for the input I appreciate all suggestions on this forum as every day I learn something new thanks again. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Danj84 Posted January 13, 2021 Author Report Share Posted January 13, 2021 14 hours ago, heppnerguy said: Nice project. Spiral are worth learning if one is interested in complex fret work. I have tried them off and on and I find I go for them with fret work of this detail. Sure make life a lot less tense when I do. I did one similar to this with pattern from Sam Custodio. I find fret patterns that take a long time to cut are so worth the time spent, as one feels they have achieved something everyone will be amazed when they see it and makes the craftsman feel proud inside. GREAT PROJECT Dick heppnerguy Hi Dick thanks I know what you mean the first large project I did was the tigers face ‘The Big Cat’ and it took me a few weeks to complete but when I did I was so proud of it yes there were a few mistakes but only I notice them really. It was the same with this one but it’s a great feeling peeling off the pattern to reveal what you have spent hours on and seeing it properly for the first time ,thanks again Dan. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.