Popular Post OzarkSawdust Posted January 22, 2021 Popular Post Report Share Posted January 22, 2021 I squirreled away some money from the sale of my bass boat for shop equipment. My three major items are a Delta 36-725T2 table saw (on order) a DeWalt DW734 planer (in the shop) and a Wahuda 8" jointer (ordered yesterday) ! Then I'll make some rolling tables, one assembly about 4' x 4' same height as the Delta saw's table for an outfeed and assembly table. Then one each for planer and jointer also sized to match the assembly for extended outfeed. I may even make one for my benchtop drill press and get it off the main workbench. When I rearrange the shop they will roll up to an outside wall for storage, leaving the center of the shop open. Well...at least that's the plan...LOL. Ken Lotts, John B, Dave Monk and 7 others 9 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted January 22, 2021 Report Share Posted January 22, 2021 Enjoy !!! You sound like a kid in a sweet shop !! OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 22, 2021 Report Share Posted January 22, 2021 Sold your bass boat? OMG! Not a bass boat... Jim McDonald, OCtoolguy, oldhudson and 1 other 1 3 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted January 22, 2021 Author Report Share Posted January 22, 2021 But I bought a smaller fishing boat...A Twin Troller. It's in the shop as we speak, waiting for warmer weather. Check it out Freedom Electric Marine - The Worlds Best Fishing Boat I'm not going to be without a way to go fishing! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 23, 2021 Report Share Posted January 23, 2021 That looks like a great way to fish. Wish I were young again. Fishing was everything! OCtoolguy, Dave Monk and OzarkSawdust 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 23, 2021 Report Share Posted January 23, 2021 6 hours ago, OzarkSawdust said: I squirreled away some money from the sale of my bass boat for shop equipment. My three major items are a Delta 36-725T2 table saw (on order) a DeWalt DW734 planer (in the shop) and a Wahuda 8" jointer (ordered yesterday) ! Then I'll make some rolling tables, one assembly about 4' x 4' same height as the Delta saw's table for an outfeed and assembly table. Then one each for planer and jointer also sized to match the assembly for extended outfeed. I may even make one for my benchtop drill press and get it off the main workbench. When I rearrange the shop they will roll up to an outside wall for storage, leaving the center of the shop open. Well...at least that's the plan...LOL. Sounds like a man with a plan. I love it. I envy the heck out of you having that much space. I'll just live vicariously through you. OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 23, 2021 Report Share Posted January 23, 2021 3 hours ago, Rockytime said: Sold your bass boat? OMG! Not a bass boat... Yes Les, the 2 happiest days in a boat owner's life. OzarkSawdust and oldhudson 2 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted January 23, 2021 Report Share Posted January 23, 2021 You went from a hole in the water to throw money into to a shop to throw money into. I like the shop best. OCtoolguy and OzarkSawdust 1 1 Quote Link to comment Share on other sites More sharing options...
ike Posted January 23, 2021 Report Share Posted January 23, 2021 I had a 12' john boar and I got too old to throw it in to the back of the truck so now I fish mostly farm ponds . dthere isbig gass i farmponds. The best I have done is a 41/2 lb large mouth on a fly rod, and a grass carp snaged with a luer it weighed 30 lb I was useing a spinning rod with 12 lb lineit was about a 2 hour battlle when I landed it I packed up and went home. No pictured I can't get any pictured loaded inddto my compudtor, so you will just have to belive me or not makjes no difference to me. IKE OCtoolguy, kmmcrafts and OzarkSawdust 2 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted January 23, 2021 Report Share Posted January 23, 2021 Nice list of new tools.. you will wonder how you did everything with out the planer.. Probably one of the most used tools in my shop besides the scroll saws.. I've been tool shopping to.. Mostly just buying add-on things for my CNC and Laser.. looking at getting a much larger laser.. but the $8000 price tag is intimidating.. trying to decide if I have enough fat to hold me over for a year of not eating.. and if the shop is warm enough now that I put heat in there for my bed to sleep on is worth it or not, OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Ken Lotts Posted January 23, 2021 Report Share Posted January 23, 2021 (edited) Congrats on the tools! Reminds me of when I got my garage built ten or eleven years ago. Lots of tool purchases... drill press, table saw & miter saw were first day items for me. Lived all my life with no place to put tools so when I finally got a place I wasted no time getting some serious tools. Here in southern AZ I want but cant justify a boat Lol.. Edited January 23, 2021 by Ken Lotts forgot to say something OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 23, 2021 Report Share Posted January 23, 2021 7 hours ago, ike said: I had a 12' john boar and I got too old to throw it in to the back of the truck so now I fish mostly farm ponds . dthere isbig gass i farmponds. The best I have done is a 41/2 lb large mouth on a fly rod, and a grass carp snaged with a luer it weighed 30 lb I was useing a spinning rod with 12 lb lineit was about a 2 hour battlle when I landed it I packed up and went home. No pictured I can't get any pictured loaded inddto my compudtor, so you will just have to belive me or not makjes no difference to me. IKE Never happened! Lol. Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 23, 2021 Report Share Posted January 23, 2021 5 hours ago, Ken Lotts said: Congrats on the tools! Reminds me of when I got my garage built ten or eleven years ago. Lots of tool purchases... drill press, table saw & miter saw were first day items for me. Lived all my life with no place to put tools so when I finally got a place I wasted no time getting some serious tools. Here in southern AZ I want but cant justify a boat Lol.. Where are you in So Az? We have looked over there too. Quote Link to comment Share on other sites More sharing options...
Ken Lotts Posted January 23, 2021 Report Share Posted January 23, 2021 1 hour ago, octoolguy said: Where are you in So Az? We have looked over there too. I live in Sierra Vista (an Army town) which is pretty close to the famous old west town of Tombstone. The closest metropolitan city would be Tucson which is about an hours drive away. Sharon and I bought a house here 31 years ago while I was serving in the Army. My house is pinned on the member map if you look there. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 23, 2021 Report Share Posted January 23, 2021 1 minute ago, Ken Lotts said: I live in Sierra Vista (an Army town) which is pretty close to the famous old west town of Tombstone. The closest metropolitan city would be Tucson which is about an hours drive away. Sharon and I bought a house here 31 years ago while I was serving in the Army. My house is pinned on the member map if you look there. I know that area well. We have been all over it. We went to the museum at Fort Huachuca. Great museum. Some of the best ribs I ever had were in a place there, I can't recall the name now. We went through about 6 months later and it had closed up. Nice restaurant. This was back about 10 years ago. I love that whole area around Benson, Tucson, Catalina Mountains. The State RV Park up in the mountains there is great. Ken Lotts 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted January 23, 2021 Author Report Share Posted January 23, 2021 16 minutes ago, Ken Lotts said: I live in Sierra Vista (an Army town) which is pretty close to the famous old west town of Tombstone. The closest metropolitan city would be Tucson which is about an hours drive away. Sharon and I bought a house here 31 years ago while I was serving in the Army. My house is pinned on the member map if you look there. We lived in Tucson for about 3 years, About 2 blocks W of I-10 on Grant, we were managing a self storage and lived on site. Lots of fantastic restaurants, and the southern most ski resort in the US. Had a shooting range about 5 min. from the house and a gun show every other weekend. Lots of interesting things around there. Ken Lotts and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Ken Lotts Posted January 23, 2021 Report Share Posted January 23, 2021 14 minutes ago, octoolguy said: I know that area well. We have been all over it. We went to the museum at Fort Huachuca. Great museum. Some of the best ribs I ever had were in a place there, I can't recall the name now. We went through about 6 months later and it had closed up. Nice restaurant. This was back about 10 years ago. I love that whole area around Benson, Tucson, Catalina Mountains. The State RV Park up in the mountains there is great. I imagine you might be thinking of Daisy Mae's. They closed down a few years ago. It was a fun western themed place and they had fabulous steaks very near the main gate of the fort. The Tombstone Vigilantes skit crews liked to show up there. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 23, 2021 Report Share Posted January 23, 2021 2 minutes ago, Ken Lotts said: I imagine you might be thinking of Daisy Mae's. They closed down a few years ago. It was a fun western themed place and they had fabulous steaks very near the main gate of the fort. The Tombstone Vigilantes skit crews liked to show up there. No, it was clear down at the opposite end of town if I recall. The name will come to me because it was the same as a place around here and I thought maybe it was connected but turns out it wasn't. It'll come to me but not when I'm trying to recall it. Later at some more inopportune time. Ken Lotts 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 23, 2021 Report Share Posted January 23, 2021 10 minutes ago, OzarkSawdust said: We lived in Tucson for about 3 years, About 2 blocks W of I-10 on Grant, we were managing a self storage and lived on site. Lots of fantastic restaurants, and the southern most ski resort in the US. Had a shooting range about 5 min. from the house and a gun show every other weekend. Lots of interesting things around there. Yes, definitely a great area. I would have moved over there but my wife had the final say. And it was no OzarkSawdust and Ken Lotts 1 1 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted January 25, 2021 Report Share Posted January 25, 2021 Can't wait to see the set up Grats on the purchases Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted January 25, 2021 Author Report Share Posted January 25, 2021 2 hours ago, new2woodwrk said: Can't wait to see the set up Grats on the purchases Me too!! Still trying to envision the best way to set it up. Trying to keep it as flexible as possible because it's not a "wood shop only" and need to do other things there. The table saw and the jointer are both due in tomorrow. It'll probably be end of the week or next week before I'm able to work in the shop. I'm in the middle of a walk in closet remodel that's a challenge and a half. I think the high school wood shop built this house...unsupervised! new2woodwrk 1 Quote Link to comment Share on other sites More sharing options...
LarryEA Posted January 25, 2021 Report Share Posted January 25, 2021 That is great. Tools for the shop and fishing. Two good recreations OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted January 25, 2021 Report Share Posted January 25, 2021 7 hours ago, OzarkSawdust said: Me too!! Still trying to envision the best way to set it up. Trying to keep it as flexible as possible because it's not a "wood shop only" and need to do other things there. The table saw and the jointer are both due in tomorrow. It'll probably be end of the week or next week before I'm able to work in the shop. I'm in the middle of a walk in closet remodel that's a challenge and a half. I think the high school wood shop built this house...unsupervised! The new table saw should help with that remodel no? OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted January 26, 2021 Author Report Share Posted January 26, 2021 Woo Hoo ! The Wahuda 8" jointer came in today! Two down, one to go...and the table saw is due in to Lowe's today just waiting for a call. new2woodwrk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.