Popular Post GusGustin Posted February 3, 2021 Popular Post Report Share Posted February 3, 2021 (edited) I drew the dog. I draw stuff, well, I draw a big mess then go to work with an eraser. BUT . I could NOT get the heart right. So - with the help of the community - we got the heart just right. The heart on this is cut from a 2" thick piece of clear redwood. Old stuff. Big stuff. The dog is cut out of 3/4" cedar - when I got done planing and stuff, it ended up at 3/4". Then .. it has a backer of 1/8" BB Ply painted black, and, attached (glued) to the back of the heart is another 1/8" BB Ply piece. This measures almost 16" long and 11 inches wide. All cut with mostly a #5 FD, the itty bitty places were cut with my trusty 2/0 FD. It's MINWAX Spar Urethane brushed on for the finish. The little letters spelling out BRODY were done in that BURL WALNUT I get locally. I love that stuff. With the left overs from the piece I cut the letters from .. I made that Rose for my wife's birthday. So - that worked great. I think that's it. Except .. a big thanks to the community for helping me with that DANGED heart !!! Edited February 3, 2021 by GusGustin additiion frankorona, ChelCass, RabidAlien and 9 others 12 Quote Link to comment Share on other sites More sharing options...
GusGustin Posted February 3, 2021 Author Report Share Posted February 3, 2021 Oh .. the rose was cut from the 1/2" walnut . .. . all with a 2/0 Pegas. I was actually trying to break it .. as I was using the same one I used on BRODY's small cuts. It finally broke near the end of this. hahahahahaa .. it was SOOOOOO dull by that point. hahahhaa Ken Lotts 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted February 3, 2021 Report Share Posted February 3, 2021 Very nicely done. GusGustin 1 Quote Link to comment Share on other sites More sharing options...
dragonkort2 Posted February 3, 2021 Report Share Posted February 3, 2021 Beautiful peaces!! I love them!!! If i were better at fret work id do the pattern of my first service dog charlie and then ask you good people to draw me a pattern for my dear sheba. The both have med long curly hair. I think it was atrop who made the pattern of charlie...but iv been to scared to try it. lol anyway just lovely peices!!! GusGustin 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted February 4, 2021 Report Share Posted February 4, 2021 You did a terrific job of cutting the dog and the heart, put them together and you have a very impressive piece of work. Well done. Marg GusGustin 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted February 4, 2021 Report Share Posted February 4, 2021 Down Right Awesome job on both. Love the Rose. GusGustin 1 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted February 4, 2021 Report Share Posted February 4, 2021 Your level of detail is amazing. GusGustin 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted February 4, 2021 Report Share Posted February 4, 2021 terrific job GusGustin 1 Quote Link to comment Share on other sites More sharing options...
Ken Lotts Posted February 4, 2021 Report Share Posted February 4, 2021 Great looking! I can hardly believe you tackled the rose with a single used 2/0. I get too worried about unexpected flaws and having to start over again to try to economize on blades. GusGustin 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 4, 2021 Report Share Posted February 4, 2021 Well done on both.. GusGustin 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted February 4, 2021 Report Share Posted February 4, 2021 Great work and a great piece to remember Brody. Nice cutting on the Rose...quick mount it on a backer so it dosen't get broken. GusGustin 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted February 4, 2021 Report Share Posted February 4, 2021 Beautiful job on both pieces. I love how you did the heart. GusGustin 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.