Popular Post OzarkSawdust Posted February 21, 2021 Popular Post Report Share Posted February 21, 2021 Well things are looking up. I picked up my new Delta 36-725T2 late yesterday. They loaded it with a forklift, and I managed to get it out of the pickup onto the shop floor without killing myself! I opened the box, took as much out as I could, and slid the rest down a set of ramps I still have. Tomorrow I'll work on putting it together as it's forecast to be above freezing. Dave Monk, Be_O_Be, Woodrush and 10 others 13 Quote Link to comment Share on other sites More sharing options...
jollyred Posted February 21, 2021 Report Share Posted February 21, 2021 Looking good. You will have to keep us informed on how you like the saw. Tom OCtoolguy and OzarkSawdust 2 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted February 21, 2021 Report Share Posted February 21, 2021 Cool! Waiting to see it. OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted February 21, 2021 Report Share Posted February 21, 2021 Always exciting to get a new toy or um tool Maybe once you get it set up and dialed in you can give us a review ? Enjoy the new addition and sty safe. OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 21, 2021 Report Share Posted February 21, 2021 I'll be following too. OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 21, 2021 Report Share Posted February 21, 2021 Are you planning on taking that saw with you to Texas next winter? OzarkSawdust, OCtoolguy and WayneMahler 1 2 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 21, 2021 Author Report Share Posted February 21, 2021 2 hours ago, WayneMahler said: Always exciting to get a new toy or um tool Maybe once you get it set up and dialed in you can give us a review ? Enjoy the new addition and sty safe. Yes! Looking forward to playing with my new toys...I mean tools. Besides the table saw I have not unboxed the new planer or jointer yet either! Snow and sub-zero set in and I don't have enough heat in the shop to mess with it. Hoping it'll stay a decent temp so the heater will keep up with it for the next couple of weeks. OCtoolguy and WayneMahler 1 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 21, 2021 Author Report Share Posted February 21, 2021 3 minutes ago, Denny Knappen said: Are you planning on taking that saw with you to Texas next winter? Only if we trade in the 5th wheel for a "toy hauler"! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Modern Art Studios Posted February 21, 2021 Report Share Posted February 21, 2021 I think you will really like the saw. Money wise, it's a great choice and you'll love the ease of mobility. Phil OzarkSawdust and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted February 21, 2021 Report Share Posted February 21, 2021 Grats on the purchase and the new arrival Can't wait to see what you do with it! OCtoolguy and OzarkSawdust 2 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 22, 2021 Author Report Share Posted February 22, 2021 2 hours ago, Modern Art Studios said: I think you will really like the saw. Money wise, it's a great choice and you'll love the ease of mobility. Phil I really like the fence and I haven't even got it all out of the box! That puppy is solid. OCtoolguy, WayneMahler and new2woodwrk 3 Quote Link to comment Share on other sites More sharing options...
Devin Wilson Posted February 22, 2021 Report Share Posted February 22, 2021 If you're on Facebook be sure to join the Facebook Group dedicated to this saw. Just search Delta 36-725 owners and it should come up. loads of little tips and tricks about that saw. Also a guy on there sells a motor upgrade kit you could call it that fixes most of the motor problems some have with the saw. OzarkSawdust, OCtoolguy and new2woodwrk 1 2 Quote Link to comment Share on other sites More sharing options...
Rolf Posted February 22, 2021 Report Share Posted February 22, 2021 I just watched a video on this saw Looks like you bought yourself a nice tool. The one thing he pointed out was that the saw draws a lot of power and to make sure to use it on a 20 amp circuit and if using an extension cord it should be a 12 gauge. It has a really nice fence. I look forward to your review. OzarkSawdust and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 22, 2021 Author Report Share Posted February 22, 2021 6 hours ago, Rolf said: I just watched a video on this saw Looks like you bought yourself a nice tool. The one thing he pointed out was that the saw draws a lot of power and to make sure to use it on a 20 amp circuit and if using an extension cord it should be a 12 gauge. It has a really nice fence. I look forward to your review. I noticed that in my searching. When I find where I use it most of the time I'll pull a separate 30amp circuit and a plug close by. That will eliminate the problems some have had. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 23, 2021 Report Share Posted February 23, 2021 @OzarkSawdustcan you give us any idea of what that saw set you back? I'm wondering how many cans & bottles I'll need to save. Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 23, 2021 Author Report Share Posted February 23, 2021 46 minutes ago, octoolguy said: @OzarkSawdustcan you give us any idea of what that saw set you back? I'm wondering how many cans & bottles I'll need to save. At Lowe's it's $599, I get a 10% veteran discount. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 23, 2021 Report Share Posted February 23, 2021 15 hours ago, OzarkSawdust said: At Lowe's it's $599, I get a 10% veteran discount. Sounds like a good deal. Thanks. Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 23, 2021 Author Report Share Posted February 23, 2021 (edited) Yesterday I had a few minutes to get it out of the box and on it's feet...with the help of my shop assistant who was holding down the instructions LOL. Maybe I can make more progress today. Edited February 23, 2021 by OzarkSawdust Be_O_Be, new2woodwrk, Phantom Scroller and 1 other 4 Quote Link to comment Share on other sites More sharing options...
rjweb Posted February 23, 2021 Report Share Posted February 23, 2021 Congratulations on the new saw, I see you have a planer there too, still in the box, RJ OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 24, 2021 Author Report Share Posted February 24, 2021 5 hours ago, rjweb said: Congratulations on the new saw, I see you have a planer there too, still in the box, RJ Yup! It's a DeWalt 734. And there's a new Wahuda 8" jointer there also. Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 24, 2021 Author Report Share Posted February 24, 2021 Got it together! Man...that thing is huge compared to my Kobalt jobsite saw! It looks like an aircraft carrier. I checked the electrical panel, and I already have a couple of 20amp circuits ready. Tomorrow I may check the adjustments and fire it up! Dave Monk, new2woodwrk, Be_O_Be and 1 other 4 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted February 24, 2021 Report Share Posted February 24, 2021 It's a great looking saw You probably already know this, but make sure to tune it up before using it for projects - makes a big difference OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted February 24, 2021 Report Share Posted February 24, 2021 Great looking saw! It's nice to get new toys to play with. Your shop looks like it's really taking shape. OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
OzarkSawdust Posted February 24, 2021 Author Report Share Posted February 24, 2021 2 hours ago, new2woodwrk said: It's a great looking saw You probably already know this, but make sure to tune it up before using it for projects - makes a big difference Yup, I hope to have time to do that today. new2woodwrk 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted February 24, 2021 Report Share Posted February 24, 2021 Happy days a lovely addition to the shop your going to be busy now watch those fingers. Roly OzarkSawdust 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.