Popular Post amazingkevin Posted February 23, 2021 Popular Post Report Posted February 23, 2021 (edited) The yoga girl gave me this piece and as soon as I seen it I knew exactly what I was going go use it for MARANATHA.i had to print the pattern backwards on thee donated by kmmcrafts flat side. Used a #7 pegas prst from Lesley's patterns. WWWScrollsawbladespatterns.com. The wood limb was 3/4" thick.Blades were donated by Kmmcrafts. Thank you Kevin!!! Edited February 23, 2021 by amazingkevin jollyred, FrankEV, Jronn65 and 7 others 10 Quote
Joe W. Posted February 23, 2021 Report Posted February 23, 2021 You are one cool cat! And it looks like the scroll saw gods were smiling upon you. Wow! amazingkevin 1 Quote
Tomanydogs Posted February 23, 2021 Report Posted February 23, 2021 That’s very nice Kevin. amazingkevin 1 Quote
Denny Knappen Posted February 23, 2021 Report Posted February 23, 2021 That is sure kool. How did you keep the log flat and steady? amazingkevin 1 Quote
Roberta Moreton Posted February 23, 2021 Report Posted February 23, 2021 Amazing! amazingkevin 1 Quote
Rockytime Posted February 24, 2021 Report Posted February 24, 2021 You da man! Really, really cool thinking outside the box. You did great Kevin. I love it! amazingkevin 1 Quote
preprius Posted February 24, 2021 Report Posted February 24, 2021 Hah, cutting out on a limb. amazingkevin 1 Quote
wombatie Posted February 24, 2021 Report Posted February 24, 2021 Wow that would not have been easy to cut. Very impressive Kevin. Marg amazingkevin 1 Quote
Charlie E Posted February 24, 2021 Report Posted February 24, 2021 Wow! Nice job on a tough project. amazingkevin 1 Quote
heppnerguy Posted February 24, 2021 Report Posted February 24, 2021 Like Denny, I was also wondering how you kept the wood from rolling as you cut it. Interesting project, for sure Dick heppnerguy amazingkevin 1 Quote
flarud Posted February 26, 2021 Report Posted February 26, 2021 Neat! ...and that's a picture from my thread on your computer screen! LOL amazingkevin 1 Quote
flarud Posted February 26, 2021 Report Posted February 26, 2021 On 2/24/2021 at 6:54 PM, heppnerguy said: Like Denny, I was also wondering how you kept the wood from rolling as you cut it. Interesting project, for sure Dick heppnerguy Easy,, Kevin doesn't use a table on his scroll saw, he took it off years ago and just "holds" the piece and cuts it! LOL heppnerguy and amazingkevin 1 1 Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/23/2021 at 2:47 PM, Joe W. said: You are one cool cat! And it looks like the scroll saw gods were smiling upon you. Wow! I hope you,right!! I need all the help i can get!!! It was interesting from start to finish!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/23/2021 at 4:27 PM, Tomanydogs said: That’s very nice Kevin. Thank you Irene and the to manydogs!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/23/2021 at 5:40 PM, Denny Knappen said: That is sure kool. How did you keep the log flat and steady? Thanks Denny .You found the only problem i encountered. So rather than make a holding jig i just winged it and fared pretty good, Wish some of the bark didnt fall,off put then again it adds character to it!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/23/2021 at 6:46 PM, Roberta Moreton said: Amazing! You put a great big grin of my mug and it's still there!!! Amazing? Absolutely!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/23/2021 at 11:06 PM, Rockytime said: You da man! Really, really cool thinking outside the box. You did great Kevin. I love it! Going to give it to the man that helped me get a battery box for my handicap scooter!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/23/2021 at 11:20 PM, preprius said: Hah, cutting out on a limb. That my friend overwhelmed my funny bone a split second after reading the last word,lol I'm still smiling like a possum!! Thank you!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/23/2021 at 11:44 PM, wombatie said: Wow that would not have been easy to cut. Very impressive Kevin. Marg Lol, thanks Marg!!! i was the jig to hold it kind of square,probably easier cutting as the wood only got thick in the center!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/24/2021 at 8:48 AM, daveww1 said: fantastic job Thank you Mr. Zen scroller Mr. Dave!!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/24/2021 at 11:09 AM, Charlie E said: Wow! Nice job on a tough project. Knowing you , you could have cut it with one hand lol ,Thank you Charlie E!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/24/2021 at 6:54 PM, heppnerguy said: Like Denny, I was also wondering how you kept the wood from rolling as you cut it. Interesting project, for sure Dick heppnerguy This was a good maybe I can do it maybe not project !! Me myself and i did all the rock and roll co ordinances, I kind of felt like a CNC machine,lol Fun cutting Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/26/2021 at 2:10 PM, flarud said: Neat! ...and that's a picture from my thread on your computer screen! LOL Hows it feel with your work up on lights!!! Thanks for the prop!!! Quote
amazingkevin Posted March 10, 2021 Author Report Posted March 10, 2021 On 2/26/2021 at 2:11 PM, flarud said: Easy,, Kevin doesn't use a table on his scroll saw, he took it off years ago and just "holds" the piece and cuts it! LOL Funny you would say that as i had wanted to do that to one of the dewalts i have to just cut coconut shells with. It would be just like a cobblers sewing machine so to speak Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.