GrampaJim Posted February 23, 2021 Report Share Posted February 23, 2021 (edited) I don't remember if I ever shared this with everyone, so I'll do it now. I scroll sitting down so I made a super heavy stand. Air quality is huge for me as I work in my basement. I invested in a small Delta dust collector and have it hooked up to may sanders, chop saw, and router table. I have the 4" line from the dust collector split in two, one hose for the under side and one for the top side. The under side is "connected" to a catch box made from 1/4" BB, the top side is attached to a re-purposed arm for a desk lamp. Works for me. The Hegner airline is setup how I got it from a friend. Edited February 28, 2021 by GrampaJim OCtoolguy, new2woodwrk, jollyred and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted February 23, 2021 Report Share Posted February 23, 2021 Looks like a great setup, very well thought out, RJ OCtoolguy, GrampaJim and WayneMahler 3 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted February 24, 2021 Report Share Posted February 24, 2021 Looks great! I like the use of the light arm. OCtoolguy, GrampaJim and WayneMahler 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 24, 2021 Report Share Posted February 24, 2021 Excellent setup. I like everything about it. GrampaJim 1 Quote Link to comment Share on other sites More sharing options...
nrscroller Posted February 28, 2021 Report Share Posted February 28, 2021 HI Do you have plans for that stand you built for your hegner, I have the regular steel stand but I am short and now I am raised up on a box frame with a stool and it would be nice to have a lower stand I could sit at on the stool. Thanks Bill OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
GrampaJim Posted February 28, 2021 Author Report Share Posted February 28, 2021 20 minutes ago, nrscroller said: HI Do you have plans for that stand you built for your hegner, I have the regular steel stand but I am short and now I am raised up on a box frame with a stool and it would be nice to have a lower stand I could sit at on the stool. Thanks Bill Sorry, I just kind of winged it. Took some measurements, bought some 2x4's and 2x6's and went at it. I put 1/4" MDF on top, over the 2x4's for a smother surface, then added a 1x3 on the edge. The front legs are shorter then the back on purpose, so the 1x3 keeps most of the mess from falling on my lap. Its just a heavy, rigid table. Let me know it you want actual dimensions, but if your chair adjusts up and down, you have some leeway. Jim OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.