Popular Post FrankEV Posted February 26, 2021 Popular Post Report Share Posted February 26, 2021 After seeing the post from Joe W. titled Nautilus Gear, I just had to make one. A quick - just for fun - project with every part made from Walnut and Pine scrap. Pegas #1 MGT R blade. And like Joe said "You can turn it in a complete circle over and over and . . . " Finished with spray Lacquer...it was fun trying to coat everything and not having it stick the moving parts to the stand . Sorry about the clinging dust in the pics. meflick, TexasDIY, Joe W. and 9 others 11 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted February 26, 2021 Report Share Posted February 26, 2021 very nice FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 26, 2021 Report Share Posted February 26, 2021 Wow, Frank, that looks super and fun to play. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
rjR Posted February 26, 2021 Report Share Posted February 26, 2021 Very neat work. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted February 27, 2021 Report Share Posted February 27, 2021 That can occupy your time when you are not on the saw. Very nice! FrankEV and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted February 28, 2021 Report Share Posted February 28, 2021 That puts a smile on my face! And the photos are great!! And best of all - it works for you too! FrankEV and amazingkevin 1 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 28, 2021 Report Share Posted February 28, 2021 On 2/26/2021 at 5:34 AM, FrankEV said: After seeing the post from Joe W. titled Nautilus Gear, I just had to make one. A quick - just for fun - project with every part made from Walnut and Pine scrap. Pegas #1 MGT R blade. And like Joe said "You can turn it in a complete circle over and over and . . . " Finished with spray Lacquer...it was fun trying to coat everything and not having it stick the moving parts to the stand . Sorry about the clinging dust in the pics. It just doesn't seem like it would even work. I just might cut this one too and give it to my great granddaughter to take to school and she her 2nd grade class. Dick heppnerguy amazingkevin and FrankEV 1 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted February 28, 2021 Author Report Share Posted February 28, 2021 53 minutes ago, heppnerguy said: It just doesn't seem like it would even work. I just might cut this one too and give it to my great granddaughter to take to school and she her 2nd grade class. Dick heppnerguy If you do cut it, make sure you use the specified drill size for the holes in the gears. Mine were too big and everything was sloppy and would not work correctly. I cheated and built up the dowels with tape to fill the gap so it would work. If you do not have the correct bit it would be better to use a 1/4" bit and open them up a tad by sanding/filing til the gears turn smoothly. amazingkevin, heppnerguy and Scrappile 1 2 Quote Link to comment Share on other sites More sharing options...
dragonkort2 Posted March 1, 2021 Report Share Posted March 1, 2021 that is awsome!! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.