DWSUDEKUM Posted June 12, 2011 Report Share Posted June 12, 2011 This bowl was created from 3/4 in thick poplar. The bowl is 12 in. long by 9/1/4 in wide. The bowl was sealed with wipe on poly then top coated with semi gloss lacquer. DW Quote Link to comment Share on other sites More sharing options...
CHawkins Posted June 12, 2011 Report Share Posted June 12, 2011 Very cool!!! Very nice work too. What angle did you set the saw at for the cuts? Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted June 13, 2011 Author Report Share Posted June 13, 2011 Since the board was 3/4 of an inch thick and the Rings were 3/8 of an inch thick the angle worked out to 26.56 degrees. Since I can not get that percise I used 26.6 degrees as measured by my electronic tilt gauge DW Quote Link to comment Share on other sites More sharing options...
wombatie Posted June 13, 2011 Report Share Posted June 13, 2011 Another beautiful bowl DW. Well done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.