Popular Post zena Posted March 12, 2021 Popular Post Report Share Posted March 12, 2021 I am only a learner to sroll sawing. I got my new carbatec scroll saw yesterday. I am feeling proud of doing this as I have never done anything like this before. I had only been cutting out the outside of things with my ryobi (now in cupboard). I was scared to have a go at this and taking the blade in and out through the holes and learning about my new saw, wooo hoooo I did it. Still need to sand it as the owl is only sitting loose on the back board. Not sure if to paint the owl or not Susan Woodrush, Jim McDonald, jollyred and 25 others 28 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted March 12, 2021 Report Share Posted March 12, 2021 You have the right to be proud, it is down right excellent. Myself I would not paint nor stain, it looks Fantastic just the way it is. Finish your sanding, then a nice coat of poly. zena and amazingkevin 2 Quote Link to comment Share on other sites More sharing options...
zena Posted March 12, 2021 Author Report Share Posted March 12, 2021 1 minute ago, lawson56 said: You have the right to be proud, it is down right excellent. Myself I would not paint nor stain, it looks Fantastic just the way it is. Finish your sanding, then a nice coat of poly. Thank you very much for your lovely comment it is always good to hear other peoples idears or opinions it helps me learn. Everyone here has been so helpful since I joined few days ago. Susan from Aussie land Quote Link to comment Share on other sites More sharing options...
lawson56 Posted March 12, 2021 Report Share Posted March 12, 2021 Your Very Welcome. When I first came here, everyone here was a huge help to me. zena 1 Quote Link to comment Share on other sites More sharing options...
zena Posted March 12, 2021 Author Report Share Posted March 12, 2021 2 minutes ago, lawson56 said: Your Very Welcome. When I first came here, everyone here was a huge help to me. Everyone here is just wonderful lawson56 and TexasDIY 2 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted March 12, 2021 Report Share Posted March 12, 2021 Awesome cutting! This is about three light-years AHEAD of my first scrollwork. LOL Love it! I'd say go with Lawson's suggestion of just sealing it as-is, and preserve your first cut with pride (not always a bad thing!). I tend to like a bit more contrast, and love Minwax's "Honey" stain, so if it were me I'd stain the owl and leave the moon as-is. Whichever way you decide to go, though, hang this in a prominent place and be proud of it! zena and lawson56 2 Quote Link to comment Share on other sites More sharing options...
zena Posted March 12, 2021 Author Report Share Posted March 12, 2021 8 minutes ago, RabidAlien said: Awesome cutting! This is about three light-years AHEAD of my first scrollwork. LOL Love it! I'd say go with Lawson's suggestion of just sealing it as-is, and preserve your first cut with pride (not always a bad thing!). I tend to like a bit more contrast, and love Minwax's "Honey" stain, so if it were me I'd stain the owl and leave the moon as-is. Whichever way you decide to go, though, hang this in a prominent place and be proud of it! Thank you very much, im even thinking of turning it into a clock lol. No one is getting this one its mine even if they want to pay me lots for it they not having it lol. Thankyou for your suggestions Susan RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
trackman Posted March 12, 2021 Report Share Posted March 12, 2021 Sign an date the back. Then in a year look at it and see if you have improved. I still have my first project. zena, lawson56 and RabidAlien 3 Quote Link to comment Share on other sites More sharing options...
zena Posted March 12, 2021 Author Report Share Posted March 12, 2021 1 minute ago, trackman said: Sign an date the back. Then in a year look at it and see if you have improved. I still have my first project. Thank you for your suggestion, I didnt think of doing that. I will for sure do that how long have your been scroll sawing for?. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 12, 2021 Report Share Posted March 12, 2021 Nice job... You are well on your way... You are officially one of us scroll saw addicts. zena and lawson56 2 Quote Link to comment Share on other sites More sharing options...
zena Posted March 12, 2021 Author Report Share Posted March 12, 2021 36 minutes ago, Scrappile said: Nice job... You are well on your way... You are officially one of us scroll saw addicts. Thank you so much I had a lot of fun today doing this. Doint the blade is so much beter than the Ryobi thats for sure. Only have to undo the top part of the blade on the Carbatec were as the Ryobi you have to take the whole blade out and it so fiddly to get back in. Im loving my new saw best thing I ever did Thinking what to make next lol Quote Link to comment Share on other sites More sharing options...
AUTOMILE Posted March 12, 2021 Report Share Posted March 12, 2021 Looks awesome! zena and lawson56 2 Quote Link to comment Share on other sites More sharing options...
zena Posted March 12, 2021 Author Report Share Posted March 12, 2021 1 minute ago, AUTOMILE said: Looks awesome! Thank you Quote Link to comment Share on other sites More sharing options...
Dan Posted March 12, 2021 Report Share Posted March 12, 2021 Very good. I'd be proud to hang it on my wall. lawson56 and zena 2 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted March 12, 2021 Report Share Posted March 12, 2021 Ya done GOOD! Can't wait to see more of your work. zena and lawson56 2 Quote Link to comment Share on other sites More sharing options...
zena Posted March 12, 2021 Author Report Share Posted March 12, 2021 5 minutes ago, Dan said: Very good. I'd be proud to hang it on my wall. Thank you very much Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted March 12, 2021 Report Share Posted March 12, 2021 Good work, onwards and upwards now never give up. Roly lawson56 and zena 2 Quote Link to comment Share on other sites More sharing options...
zena Posted March 12, 2021 Author Report Share Posted March 12, 2021 1 hour ago, Phantom Scroller said: Good work, onwards and upwards now never give up. Roly Thank you im in for the long haul to much fun to give up Phantom Scroller 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted March 12, 2021 Report Share Posted March 12, 2021 You did a great job on your first scroll saw project Susan! What woods did you use? It appears you used a hardwood for the Owl, or at least a hardwood veneer plywood. Using any oil based finish such as lacquer or polyurethane will bring out the natural color of the wood. If you use a water based finish, it will not change the wood. lawson56 and zena 2 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted March 12, 2021 Report Share Posted March 12, 2021 Woot grats! Nicely done and thanks for sharing it zena and lawson56 1 1 Quote Link to comment Share on other sites More sharing options...
nrscroller Posted March 13, 2021 Report Share Posted March 13, 2021 Congrats, you did make something nice. It just takes practice and courage to do it. I have been scrolling for years and I made an Ark of the Covenant scrollsaw project for our Pastor for Christmas and I've never done anything that complicated. I took a picture of it and hung it up next to my scroll saw with a sign over it that says If you can make this Bill, you can make anything. Try that one, it may help keep you on track Bill in Wisconsin zena and lawson56 1 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted March 13, 2021 Report Share Posted March 13, 2021 11 hours ago, zena said: I am only a learner to sroll sawing. I got my new carbatec scroll saw yesterday. I am feeling proud of doing this as I have never done anything like this before. I had only been cutting out the outside of things with my ryobi (now in cupboard). I was scared to have a go at this and taking the blade in and out through the holes and learning about my new saw, wooo hoooo I did it. Still need to sand it as the owl is only sitting loose on the back board. Not sure if to paint the owl or not Susan Congratulations on a job well done. I love to see new scrollers tackle the ones they are not too sure about.. You are right not to jump too far over your head but to give something new a try to find out how you will do. success is yours and I can see a lot of wonderful new projects coming from your shop throughout the year. Dick heppnerguy zena and lawson56 1 1 Quote Link to comment Share on other sites More sharing options...
trackman Posted March 13, 2021 Report Share Posted March 13, 2021 11 hours ago, zena said: Thank you for your suggestion, I didnt think of doing that. I will for sure do that how long have your been scroll sawing for?. Been scrolling for about 11 years. Started after I retired. zena 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted March 13, 2021 Report Share Posted March 13, 2021 Congratulations Susan you did a fabulous job. Certainly one to be proud of. No paint or stain but that's only my opinion. With your new saw you are now officially addicted and there is no known cure. Marg lawson56 and zena 2 Quote Link to comment Share on other sites More sharing options...
zena Posted March 13, 2021 Author Report Share Posted March 13, 2021 11 hours ago, Joe W. said: Ya done GOOD! Can't wait to see more of your work. Thank you very much Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.