Popular Post Denny Knappen Posted March 23, 2021 Popular Post Report Share Posted March 23, 2021 A project finished Monday. This is a Steve Good pattern. I used 1/4" solid Walnut and backed with 3/8" Baltic Birch plywood. I used 3/8" so that it would hold the hanger without going through the wood. Cut on the Pegas Scroll Saw using #1R MGT blades on all interior cuts and #3R on the exterior cuts. The finish is one coat spray Shellac as a sanding sealer. Then two coats MinWax Lacquer Clear Satin, sanding in between coats. I should have used 1/8" so that the white would show through the Walnut. 150 holes. Comments welcome. GrampaJim, frankorona, ChelCass and 16 others 19 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted March 23, 2021 Report Share Posted March 23, 2021 30 minutes ago, Denny Knappen said: A project finished Monday. This is a Steve Good pattern. I used 1/4" solid Walnut and backed with 3/8" Baltic Birch plywood. I used 3/8" so that it would hold the hanger without going through the wood. Cut on the Pegas Scroll Saw using #1R MGT blades on all interior cuts and #3R on the exterior cuts. The finish is one coat spray Shellac as a sanding sealer. Then two coats MinWax Lacquer Clear Satin, sanding in between coats. I should have used 1/8" so that the white would show through the Walnut. 150 holes. Comments welcome. I saw this one on Steve's page. I thought it would make an interesting project. You proved my thoughts to be correct. Looking good Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 23, 2021 Author Report Share Posted March 23, 2021 16 minutes ago, heppnerguy said: I saw this one on Steve's page. I thought it would make an interesting project. You proved my thoughts to be correct. Looking good Dick heppnerguy Thanks Dick. I like how it turned out, but there were 150 holes. Some holes real small. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
rjR Posted March 23, 2021 Report Share Posted March 23, 2021 Very nicely done. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 23, 2021 Author Report Share Posted March 23, 2021 1 hour ago, rjR said: Very nicely done. Thanks RJ. Quote Link to comment Share on other sites More sharing options...
FrankEV Posted March 23, 2021 Report Share Posted March 23, 2021 It is a great piece. Very well done. I concur, thiner cut panel would have been visualy better. I have found that to be a truism for most fretcut projects where the background needs to show through. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 23, 2021 Author Report Share Posted March 23, 2021 1 minute ago, FrankEV said: It is a great piece. Very well done. I concur, thiner cut panel would have been visualy better. I have found that to be a truism for most fretcut projects where the background needs to show through. Thanks Frank. I didn't have a piece of 1/8" Walnut. I should have stained Baltic Birch plywood. I still like the look of the Walnut. Quote Link to comment Share on other sites More sharing options...
lawson56 Posted March 23, 2021 Report Share Posted March 23, 2021 An Excellent job!! Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 23, 2021 Author Report Share Posted March 23, 2021 3 minutes ago, lawson56 said: An Excellent job!! Thanks Bobby. Stop by ArtCrafters sometime. Quote Link to comment Share on other sites More sharing options...
lawson56 Posted March 23, 2021 Report Share Posted March 23, 2021 If I,m ever in Dayton, I drop by and say Howdy. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 23, 2021 Author Report Share Posted March 23, 2021 9 minutes ago, lawson56 said: If I,m ever in Dayton, I drop by and say Howdy. You can even play with the Pegas Scroll Saw amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted March 23, 2021 Report Share Posted March 23, 2021 Comments? Only one - Beautiful! Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 23, 2021 Author Report Share Posted March 23, 2021 14 minutes ago, Joe W. said: Comments? Only one - Beautiful! Thanks Joe. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 24, 2021 Report Share Posted March 24, 2021 Great job Denny! Quote Link to comment Share on other sites More sharing options...
FrankEV Posted March 24, 2021 Report Share Posted March 24, 2021 3 hours ago, Denny Knappen said: Thanks Frank. I didn't have a piece of 1/8" Walnut. I should have stained Baltic Birch plywood. I still like the look of the Walnut. I often use the Walnut 5/32" purebond Solid Core ply I get fron HD. Add some Walnut stain and it even look better. Finishes beautifuly. Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted March 24, 2021 Report Share Posted March 24, 2021 Very pretty. Quote Link to comment Share on other sites More sharing options...
dgman Posted March 24, 2021 Report Share Posted March 24, 2021 Looks good Denny! Quote Link to comment Share on other sites More sharing options...
daveww1 Posted March 24, 2021 Report Share Posted March 24, 2021 terrific job, it's beautiful Quote Link to comment Share on other sites More sharing options...
scrollerpete Posted March 24, 2021 Report Share Posted March 24, 2021 Another masterpiece Denny, stay safe Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 24, 2021 Author Report Share Posted March 24, 2021 13 hours ago, Scrappile said: Great job Denny! Thanks Paul. A fun project. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 24, 2021 Author Report Share Posted March 24, 2021 5 hours ago, Tomanydogs said: Very pretty. Thanks Irene. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 24, 2021 Author Report Share Posted March 24, 2021 2 hours ago, dgman said: Looks good Denny! Thanks Dan. Any projects on the new Saw? Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 24, 2021 Author Report Share Posted March 24, 2021 1 hour ago, daveww1 said: terrific job, it's beautiful Thanks Dave Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 24, 2021 Author Report Share Posted March 24, 2021 5 minutes ago, scrollerpete said: Another masterpiece Denny, stay safe Thanks Pete. You stay safe too. Quote Link to comment Share on other sites More sharing options...
Frank Pellow Posted March 24, 2021 Report Share Posted March 24, 2021 Well done! I've been thinking of doing this pattern for some time. The way that you have utilized the pattern is an inspiration and I think that I I have some Walnut somewhere that will be appropriate. The only problem will be in finding that Walnut. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.