Popular Post WolfmoonCT Posted June 14, 2021 Popular Post Report Share Posted June 14, 2021 Cut on the quilted maple guitar seconds from the guy on FB.. I forgot his name... Another Sheila Landry design. Jim McDonald, lawson56, goldfish and 13 others 16 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted June 14, 2021 Report Share Posted June 14, 2021 Nicely done! Thanks for sharing and God Bless! Spirithorse Quote Link to comment Share on other sites More sharing options...
Rockytime Posted June 14, 2021 Report Share Posted June 14, 2021 Love the pattern and the wood. Nice job. Do you find the wood cupped? I ordered the same wood from him. Mine is cupped but is easily corrected. Quote Link to comment Share on other sites More sharing options...
wombatie Posted June 14, 2021 Report Share Posted June 14, 2021 Love it and I agree. Great work. Marg Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted June 14, 2021 Report Share Posted June 14, 2021 Nice sign. Well done. Quote Link to comment Share on other sites More sharing options...
lawson56 Posted June 14, 2021 Report Share Posted June 14, 2021 Right On!! Beautiful job!! Quote Link to comment Share on other sites More sharing options...
WolfmoonCT Posted June 14, 2021 Author Report Share Posted June 14, 2021 7 hours ago, Rockytime said: Love the pattern and the wood. Nice job. Do you find the wood cupped? I ordered the same wood from him. Mine is cupped but is easily corrected. Yep.. Mine is cupped. some worst than others.. I have another project that over the roughly 7" across it is, it's cupped about 1/8" in the middle.. Made for difficult cutting cause it made the wood bounce a lot. How do you fix the cup? I used the heat gun trick on this pattern, because humidity actually made it so the cup side was on the pattern side, and I was able to flip it upside down and use the heat gun on the back and it flatted out for the most part. My current project was cupped on the back and stayed that way. I don't want to use a heat gun and risk heating up the painters tape or pattern too much and make the glue lose it's tack, or make the glue seep into the wood more.. I have bunch of the wood left over and it would be great to flatten out any piece before and after any pattern is applied. Rockytime 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted June 14, 2021 Report Share Posted June 14, 2021 terrific job, great cutting of the letters Quote Link to comment Share on other sites More sharing options...
Rockytime Posted June 14, 2021 Report Share Posted June 14, 2021 5 hours ago, WolfmoonCT said: Yep.. Mine is cupped. some worst than others.. I have another project that over the roughly 7" across it is, it's cupped about 1/8" in the middle.. Made for difficult cutting cause it made the wood bounce a lot. How do you fix the cup? I used the heat gun trick on this pattern, because humidity actually made it so the cup side was on the pattern side, and I was able to flip it upside down and use the heat gun on the back and it flatted out for the most part. My current project was cupped on the back and stayed that way. I don't want to use a heat gun and risk heating up the painters tape or pattern too much and make the glue lose it's tack, or make the glue seep into the wood more.. I have bunch of the wood left over and it would be great to flatten out any piece before and after any pattern is applied. Mine is cupped about the same as yours. I lightly moistened the cupped side, laid the cupped side down and placed a thick plywood with weight on it. Flattened out in a few hours. I do love the wood. Quote Link to comment Share on other sites More sharing options...
WolfmoonCT Posted June 14, 2021 Author Report Share Posted June 14, 2021 3 hours ago, Rockytime said: Mine is cupped about the same as yours. I lightly moistened the cupped side, laid the cupped side down and placed a thick plywood with weight on it. Flattened out in a few hours. I do love the wood. Did you find that it cupped back at all after like a week or so? Quote Link to comment Share on other sites More sharing options...
Rockytime Posted June 14, 2021 Report Share Posted June 14, 2021 1 hour ago, WolfmoonCT said: Did you find that it cupped back at all after like a week or so? It has not. When I first applied moisture I really soaked the cupped side. Next morning it cupped the opposite way lifting very heavy weights. I re-moistened the cup side but just barely. Placed a board on it with weights and it straightened real well. Trick I think is to only very slightly or sparingly dampen the wood. Hopefully when I do this again its not me that's all wet! meflick 1 Quote Link to comment Share on other sites More sharing options...
WolfmoonCT Posted June 15, 2021 Author Report Share Posted June 15, 2021 3 hours ago, Rockytime said: It has not. When I first applied moisture I really soaked the cupped side. Next morning it cupped the opposite way lifting very heavy weights. I re-moistened the cup side but just barely. Placed a board on it with weights and it straightened real well. Trick I think is to only very slightly or sparingly dampen the wood. Hopefully when I do this again its not me that's all wet! I may try it next time I use it.. see if I can flatten it before putting the pattern on. I just glued up some quarter sawn red oak for the next project. Rockytime 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted June 17, 2021 Report Share Posted June 17, 2021 On 6/13/2021 at 5:34 PM, WolfmoonCT said: Cut on the quilted maple guitar seconds from the guy on FB.. I forgot his name... Another Sheila Landry design. You brought a loud laugh to me when I read your nicely done plaque. Dick heppenrguy Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.