munzieb Posted July 8, 2021 Report Share Posted July 8, 2021 (edited) After dealing with worn out clamps on my EX-16, thought it was time for an upgrade. I am a top feeder and had replaced my bottom clamp once and even put in a helicoil in the thread but everything eventually it all got too wobbly. Called Denny at Artcrafters and had my replacement in 3 days! I took my deck off and it made for a much easier replacement. The top was in actually in good shape but the bottom was a different story. Needle bearings were a little dirty and didn't rotate properly but with a little cleaning, they were back to good working order. Actual replacement on both the top and bottom were very easy. I figured out a while back that having the thumb screw on the left on the bottom worked better for me so I could position the blade with my right hand. Moved the stop screw to the right side with no problem. No major tension adjustments needed and all is working well. Thanks Denny for quick delivery and and answering some set up questions. Edited July 8, 2021 by munzieb GrampaJim, Roberta Moreton and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Woodmaster1 Posted July 9, 2021 Report Share Posted July 9, 2021 I have had my pegas clamps for a couple years and wouldn't ever go back. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted July 9, 2021 Report Share Posted July 9, 2021 Happy you got them installed, Brend. It was a joy talking with you. munzieb and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.