FrankEV Posted July 15, 2021 Report Share Posted July 15, 2021 I converted a free stencil version of this image I found on-line into a scroll saw pattern for mounting on an 8” x 10” backer. I cut the image using Pegas 2/0 spiral blades in some scrap 1/8” BB ply. I positioned the cut image on the 1/4” BB Ply backer on a diagonal for a more pleasing visual effect. After deciding how I wanted it to align on the backer, the cutting and the exposed cut out areas of the backer was hand painted using Artist Acrylic Paints. Again the painting of the cut piece was tedious and time consuming. And again as usual, after the cutting was affixed to the backer, the panel was finished with multiple coats of Clear Glossy Spray Lacquer. The frame is 3/4” wide Polpar finished with Minwax Classic Black Poly/Stain (I see in the photo I have to clean a few fuzzies off the frame that went undetected until you get up close with the camera.) This piece uses an additional leftover cardboard kick stand backer from a cheap frame I had purchased way back when for another project, making it a Table Standing Piece. I decided to do this piece to replace a similar but different piece, that I had previously made, which has been sold. Critique of my work is always appreciated. jollyred, TexasDIY, goldfish and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted July 15, 2021 Report Share Posted July 15, 2021 What's to critique... very nice job. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted July 15, 2021 Report Share Posted July 15, 2021 Well done! Thanks for sharing and God Bless! Spirithorse FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Fab4 Posted July 15, 2021 Report Share Posted July 15, 2021 Hi Frank: After reading your comment, I said to myself "He's asking for it, so I'm going to let him know what I think about his work" Darn it, I have nothing to say except that looks really good Oh wait. I found something Roses should have been yellow or white...sorry, that's all I've got Keep up the great work Frank Fab4 FrankEV 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted July 15, 2021 Report Share Posted July 15, 2021 Love Red Roses. You did an Awesome job!!! Not a Darn thing to say but Awesome!! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted July 15, 2021 Author Report Share Posted July 15, 2021 1 hour ago, Fab4 said: ...Roses should have been yellow or white... I considered yellow, white, purple and even Black Roses but Red Roses are commonly associated with LOVE. so.... But not to fret, I'm in the process of cutting another Rose Piece... and seriously considering Yellow. Roses. preprius and Fab4 2 Quote Link to comment Share on other sites More sharing options...
preprius Posted July 16, 2021 Report Share Posted July 16, 2021 3 hours ago, FrankEV said: .... and seriously considering Yellow. Roses. So if you use yellow heart wood for the rose. You will have less painting. But the red look fantastic. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 16, 2021 Report Share Posted July 16, 2021 Another extremely well dine project that turned out beautifully FrankEV 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted July 16, 2021 Report Share Posted July 16, 2021 great job FrankEV 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted July 17, 2021 Report Share Posted July 17, 2021 Elegant. Great job. Marg FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.