Joe W. Posted July 18, 2021 Report Share Posted July 18, 2021 Thought I'd share a "Duh - dope slap" moment with you in hopes it helps someone not have the same experience. . . So there I was . . . printing off a Steve Good pattern using Inkscape to make the cutting lines red. The pattern: "Baseball Teams" consists of 4 pieces - a base with slots and three other pieces with tabs to fit into the base plate. I discovered that if I turned the Printer's "Borderless" setting to "on" the pattern on the printed page is stretched 1/4". I learned this after cutting out one of the pieces with tabs and found the tabs would not line up with the corresponding base slots. It baffled me for a time until I realized the page of the base plate was printed using the printers "Borderless" setting set to off - and the other pieces were printed on a different page with the Borderless setting set to "on". It had me going for awhile, but after some experimenting I got the "Aha" (translation: You dummy!). OCtoolguy, TexasDIY, preprius and 2 others 3 2 Quote Link to comment Share on other sites More sharing options...
preprius Posted July 18, 2021 Report Share Posted July 18, 2021 These reminders are great. Thanks. I also found a setting to keep the object aspect ratio. It should be set by default. But it is not. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 18, 2021 Report Share Posted July 18, 2021 I have not had that problem before as I don't mess much with the preset settings. But if I ever do what you did by mistake, I now know what to do about it. thanks for sharing. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Fab4 Posted July 18, 2021 Report Share Posted July 18, 2021 Hi Joe: We should have a separate forum called "That "AHA" moment We could all learn a few things from Villagers being a bunch of "AHA's" It's always funny when it happens to someone else Thanks for sharing your AHA moment with us Fab4 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
don in brooklin on Posted July 18, 2021 Report Share Posted July 18, 2021 3 hours ago, Fab4 said: Hi Joe: We should have a separate forum called "That "AHA" moment We could all learn a few things from Villagers being a bunch of "AHA's" It's always funny when it happens to someone else Thanks for sharing your AHA moment with us Fab4 I would second that we should have an area were we put those AHA moments. Just after I read this I was altering Steve Good's Post from today. Instead of "If Gramma is missing" I wanted to put If Tony is missing. (A good friend) I opened Steve's Pattern and drew circle and put text on circle. It was backwards. I did everything I could think of and then AHA. Took pattern and copied to a new document. Then worked like a charm. I have had this occur before. I think between Corel Draw and Inkscape something happens with the PDF. I had this before and forgot this should be done. Now I will remember. I will post when I have cut. OCtoolguy and Fab4 1 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted July 18, 2021 Report Share Posted July 18, 2021 Joe W, can you explain how you take a steve good pattern and put in inkscape, and then change to red lines, I don’t know how to even get the pattern into inkscape, sorry not real good with these programs, thx RJ OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
don in brooklin on Posted July 18, 2021 Report Share Posted July 18, 2021 (edited) 3 hours ago, rjweb said: Joe W, can you explain how you take a steve good pattern and put in inkscape, and then change to red lines, I don’t know how to even get the pattern into inkscape, sorry not real good with these programs, thx RJ Here is a quick PDF that explains the process. Steve explains the process he uses to get the pattern into Inscape. Either Import or Open will work.https://youtu.be/hh4JwEjCL8Y if you have specific questions please PM. red line in inkscape.pdf Edited July 18, 2021 by don in brooklin on OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted July 18, 2021 Report Share Posted July 18, 2021 Thx Don, pm sent, RJ OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.