OCtoolguy Posted August 4, 2021 Report Share Posted August 4, 2021 38 minutes ago, Bill WIlson said: Barbara was a guest at one of our scroll saw club meetings, several years ago. She did a short presentation on their products for the benefit of our members, all of whom were from Western PA, but only a handful were familiar with PS Wood products. We all had seen their ads in the scrolling magazines, but very few knew they where located so close by. Anyway, I recall that she was very nice and knowledgeable about all things scroll saw related. She said that they used to do a lot of trade shows and the scroll saw picnics that used to be very popular within the scrolling community. I recall she said that they don't do much of that sort of thing anymore. I really should make it a point to take a road trip down there to check them out in person. I'd sure love to attend any scroll saw get together but here in So Cal, it's just not something that anybody does. I think it's because we've become too much of a melting pot here and there's just no interest in woodworking. Not sure why. SCROLLERNATION 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted August 5, 2021 Report Share Posted August 5, 2021 4 hours ago, octoolguy said: I'd sure love to attend any scroll saw get together but here in So Cal, it's just not something that anybody does. I think it's because we've become too much of a melting pot here and there's just no interest in woodworking. Not sure why. Likewise. I'd love to talk shop with other scrollers. I frequently eat at a particular restaurant which has a couple of nicely scrolled items on their walls. I was introduced to the two persons that did them I tried striking up a conversation with them but they were not particularly interested in a conversation. There is a turning club in Denver but have no idea if they do other things and I no longer drive long distances or evenings. I spend more time with bikers. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted August 5, 2021 Report Share Posted August 5, 2021 38 minutes ago, Rockytime said: Likewise. I'd love to talk shop with other scrollers. I frequently eat at a particular restaurant which has a couple of nicely scrolled items on their walls. I was introduced to the two persons that did them I tried striking up a conversation with them but they were not particularly interested in a conversation. There is a turning club in Denver but have no idea if they do other things and I no longer drive long distances or evenings. I spend more time with bikers. You are right, Les, It is great.... I visit and communicate with three... Always a great time... but I have also run into scrollers that shy away or just aren't interested in meet and greets... Very disappointing. Especially being I live in an area where scrollers are few and far between... My closest scrolling friends are 40 miles away.... well worth the short travel to get together... Rockytime and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted August 5, 2021 Report Share Posted August 5, 2021 Let's start an assisted living home for scrollers. What a hoot. meflick, SCROLLERNATION, Rockytime and 2 others 3 2 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted August 5, 2021 Report Share Posted August 5, 2021 21 minutes ago, octoolguy said: Let's start an assisted living home for scrollers. What a hoot. Would we remember what we are talking about, whose machine is whose, where the blade goes....?? OCtoolguy, Rockytime and SCROLLERNATION 3 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted August 5, 2021 Report Share Posted August 5, 2021 I'll be one of the first ones there! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted August 5, 2021 Report Share Posted August 5, 2021 4 hours ago, Scrappile said: Would we remember what we are talking about, whose machine is whose, where the blade goes....?? Who cares? We'd just be having the time of our lives. Roberta Moreton and Rockytime 2 Quote Link to comment Share on other sites More sharing options...
xocd Posted August 17, 2021 Report Share Posted August 17, 2021 I like the saw on this video: - Large throat - Induction motor - Pedal controlled speed (clutch?) - Hand wheel for delicate cuts - Probably unobtainable :0 xocd OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted August 17, 2021 Report Share Posted August 17, 2021 38 minutes ago, xocd said: I like the saw on this video: - Large throat - Induction motor - Pedal controlled speed (clutch?) - Hand wheel for delicate cuts - Probably unobtainable :0 xocd Great video. Where'd you find it? I thought I'd seen all the vids on youtube re: marquetry. Quote Link to comment Share on other sites More sharing options...
xocd Posted August 18, 2021 Report Share Posted August 18, 2021 1 hour ago, octoolguy said: Great video. Where'd you find it? I thought I'd seen all the vids on youtube re: marquetry. It appears under a youtube search for "marquetry knife". There is no knife in the video. xocd OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
preprius Posted August 18, 2021 Report Share Posted August 18, 2021 (edited) I decided to add more features... laser for hole drilling. 2 inch deep. index circular turn table for clock gears. also an adjustable Threaded pivot point for circles. 20ft of blades in a roll so we can have automatic blade feeding. self clamping and cut from bottom. Edited August 18, 2021 by preprius added laser item OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
cwright Posted August 19, 2021 Report Share Posted August 19, 2021 I may have found mine this weekend. Hegner 22V, 1999 model that was never used. Quick clamp, stand, cover, table screws, blade camps (4), all accessories still in the bags. Previous owner bought it, turned it on, tension was all the way down, broke part of the connector arm off. He then slid it over in the corner and let it sit. Connector arm should be tomorrow, can't wait...... kmmcrafts, SCROLLERNATION and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted August 19, 2021 Report Share Posted August 19, 2021 2 minutes ago, cwright said: I may have found mine this weekend. Hegner 22V, 1999 model that was never used. Quick clamp, stand, cover, table screws, blade camps (4), all accessories still in the bags. Previous owner bought it, turned it on, tension was all the way down, broke part of the connector arm off. He then slid it over in the corner and let it sit. Connector arm should be tomorrow, can't wait...... Wow! Sounds great. Did you get a good price on it? Quote Link to comment Share on other sites More sharing options...
cwright Posted August 19, 2021 Report Share Posted August 19, 2021 I think I did, $650.00, plus cost me a little over $50 to by the connector arm. OCtoolguy, kmmcrafts and Scrappile 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted August 19, 2021 Report Share Posted August 19, 2021 11 hours ago, cwright said: I think I did, $650.00, plus cost me a little over $50 to by the connector arm. Excellent! Quote Link to comment Share on other sites More sharing options...
rash_powder Posted September 12, 2021 Report Share Posted September 12, 2021 That maquetry machine...... It looks very similar to the 1950's craftsman scrollsaw I have. The Craftsman was meant to use a shop motor or whatever you had handy, but that Marquetry machine, the first thing I thought with the wheel and foot speed control was a sewing machine. If a scrollsaw and a sewing machine were to mate; I feel that saw would be the outcome. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.