Popular Post Dak0ta52 Posted September 6, 2021 Popular Post Report Share Posted September 6, 2021 I started this project almost 2 months ago but had to set it aside after a few issues required me to remodel my bathroom and then I had to complete 2 commission projects. This is a Steve Good pattern and is cut with 1/4 Birch using Pegas 2/0 MFG. The back is 1/4 ply. The front is finished with natural stain while the back is finished with dark walnut. It then received several coats of clear gloss. The fine cuts were a little tricky and I had to keep reminding myself to let the blades do the work and not push it. WolfmoonCT, Dave Monk, jollyred and 32 others 33 2 Quote Link to comment Share on other sites More sharing options...
Tbow388 Posted September 6, 2021 Report Share Posted September 6, 2021 Gorgouse, Great job. Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 6, 2021 Report Share Posted September 6, 2021 What a beautiful piece. Great work. Marg OCtoolguy, Dak0ta52 and danny 2 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted September 6, 2021 Report Share Posted September 6, 2021 You did an Awesome job!! I have to remind myself of that a lot. Oh the Blades I've broken, and pieces. Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
don watson Posted September 6, 2021 Report Share Posted September 6, 2021 Beautiful piece. Well done. Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
jr42 Posted September 6, 2021 Report Share Posted September 6, 2021 looks nice good job OCtoolguy and Dak0ta52 1 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted September 6, 2021 Report Share Posted September 6, 2021 terrific job OCtoolguy and Dak0ta52 1 1 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted September 6, 2021 Report Share Posted September 6, 2021 That's some mighty fine cutting! Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted September 6, 2021 Report Share Posted September 6, 2021 That is a beauty!! Dak0ta52, danny and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 6, 2021 Report Share Posted September 6, 2021 14 hours ago, Dak0ta52 said: I started this project almost 2 months ago but had to set it aside after a few issues required me to remodel my bathroom and then I had to complete 2 commission projects. This is a Steve Good pattern and is cut with 1/4 Birch using Pegas 2/0 MFG. The back is 1/4 ply. The front is finished with natural stain while the back is finished with dark walnut. It then received several coats of clear gloss. The fine cuts were a little tricky and I had to keep reminding myself to let the blades do the work and not push it. Beautiful work. Very delicate. Dak0ta52, FrankEV and jr42 2 1 Quote Link to comment Share on other sites More sharing options...
namunolie Posted September 8, 2021 Report Share Posted September 8, 2021 That is Beautiful~ OCtoolguy and Dak0ta52 1 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted September 9, 2021 Report Share Posted September 9, 2021 That's a beauty! Thanks for sharing and God Bless! Spirithorse Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 9, 2021 Report Share Posted September 9, 2021 Gorgeous ! Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted September 9, 2021 Report Share Posted September 9, 2021 This is a really nice pattern and you aced it. It came out fantastic. Thank you so much for posting it Dick heppnerguy Dak0ta52, danny and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted September 10, 2021 Report Share Posted September 10, 2021 Beautiful. Love the wood choice and color. Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted September 11, 2021 Report Share Posted September 11, 2021 Beautiful is an understatement! OCtoolguy and Dak0ta52 1 1 Quote Link to comment Share on other sites More sharing options...
WolfmoonCT Posted September 11, 2021 Report Share Posted September 11, 2021 Very nicely done.. Where did you get the pattern? Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted September 11, 2021 Report Share Posted September 11, 2021 Lovely cut. Roly Dak0ta52 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted September 12, 2021 Author Report Share Posted September 12, 2021 14 hours ago, WolfmoonCT said: Very nicely done.. Where did you get the pattern? Can't remember exactly when I downloaded it from Steve Good's files. Had to be within the last couple months. I just check and it is still there. I typed "butterfly" in the search area and it was listed there. If you have trouble finding it, let me know and I'll send you the PDF file. Quote Link to comment Share on other sites More sharing options...
WolfmoonCT Posted September 12, 2021 Report Share Posted September 12, 2021 15 hours ago, Dak0ta52 said: Can't remember exactly when I downloaded it from Steve Good's files. Had to be within the last couple months. I just check and it is still there. I typed "butterfly" in the search area and it was listed there. If you have trouble finding it, let me know and I'll send you the PDF file. Got it. Thanks. Quote Link to comment Share on other sites More sharing options...
alexfox Posted September 14, 2021 Report Share Posted September 14, 2021 Awesome job! Dak0ta52 and danny 1 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted September 14, 2021 Report Share Posted September 14, 2021 Excellent! That's some delicate cutting! And the symmetry on the bottom part is great, looks like a mirror image from one side to the other. Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
Woodrush Posted September 15, 2021 Report Share Posted September 15, 2021 On 9/5/2021 at 10:27 PM, Dak0ta52 said: I started this project almost 2 months ago but had to set it aside after a few issues required me to remodel my bathroom and then I had to complete 2 commission projects. This is a Steve Good pattern and is cut with 1/4 Birch using Pegas 2/0 MFG. The back is 1/4 ply. The front is finished with natural stain while the back is finished with dark walnut. It then received several coats of clear gloss. The fine cuts were a little tricky and I had to keep reminding myself to let the blades do the work and not push it. Beautiful danny and Dak0ta52 1 1 Quote Link to comment Share on other sites More sharing options...
ValentinDerkovsky Posted October 1, 2021 Report Share Posted October 1, 2021 (edited) Copyright is a serious thing, if you really love what you do, you will stand up to defend your rights. I also had a copyright problem once. You have very good jobs. I tried many times, but apparently it's not mine. But for that I photograph well. The most important thing for me as a photographer is to protect my work from intruders who want to use my work without my agreement. If you, like me, are afraid of such scammers, then I highly recommend you to use this application https://play.google.com/store/apps/details?id=com.visualwatermark.watermarkly. Especially if you are putting photos of your work for sale, or just on the Internet. Take care of your safety. Edited October 8, 2021 by ValentinDerkovsky Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
Tomanydogs Posted October 2, 2021 Report Share Posted October 2, 2021 The stains you’ve used makes it look rich. I really like it. Well done. Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.