Popular Post Foxfold Posted September 7, 2021 Popular Post Report Posted September 7, 2021 (edited) A lovely pattern by Jim Blume. I couldn't resist cutting it. Straight off the saw so no finish or frame yet. Done on an A4 sheet of 3mm b/b and #2 Niqua blades. Edited September 7, 2021 by Foxfold namunolie, Wilson142, Dave Monk and 20 others 22 1 Quote
RabidAlien Posted September 7, 2021 Report Posted September 7, 2021 Definitely a happy Rottie!! Well cut! Foxfold 1 Quote
Scrappile Posted September 7, 2021 Report Posted September 7, 2021 Super job cutting that picture,,, but won't your German Shepards be jealous?? I watched the cutest short video the other day of a little girl on a trampoline with the family Rottweiler. They were having a great time... Quote
FrankEV Posted September 7, 2021 Report Posted September 7, 2021 Very well done. Great mug on that Rottie! Quote
Foxfold Posted September 7, 2021 Author Report Posted September 7, 2021 (edited) 38 minutes ago, Scrappile said: Super job cutting that picture,,, but won't your German Shepards be jealous?? I watched the cutest short video the other day of a little girl on a trampoline with the family Rottweiler. They were having a great time... Thankyou, the Shepherds are fine, I did them one on the router Edited September 7, 2021 by Foxfold Scrappile, TripleJScroller, lawson56 and 1 other 4 Quote
Foxfold Posted September 7, 2021 Author Report Posted September 7, 2021 7 minutes ago, FrankEV said: Very well done. Great mug on that Rottie! Must admit, it's the best Rottie pattern that I've ever seen. ! FrankEV 1 Quote
Charlie E Posted September 7, 2021 Report Posted September 7, 2021 Great job. I like dogs but having worked as a service mechanic for Alabama's natural gas utility I had a few try to have me for a snack. A Rottweiler and a German Shepherd are on the list. I know they're not all the same but it still comes to mind. Very nice cutting and great pattern! Foxfold 1 Quote
Foxfold Posted September 7, 2021 Author Report Posted September 7, 2021 24 minutes ago, Charlie E said: Great job. I like dogs but having worked as a service mechanic for Alabama's natural gas utility I had a few try to have me for a snack. A Rottweiler and a German Shepherd are on the list. I know they're not all the same but it still comes to mind. Very nice cutting and great pattern! Thank you. I agree with you about the dogs though. People make bad dogs though, my lot kissed the people who burgled us last year !! Charlie E 1 Quote
Dak0ta52 Posted September 7, 2021 Report Posted September 7, 2021 Very clean cuts. Even though it isn't finished the black makes the Rottie pop. And if anyone broke into my home with my dogs standing guard, they would drown. They would get slobbered to death. No, they are not bull dogs or St. Bernards, they are a long haired Chihuahua and Papillon. (The fear!!! Being licked to death!) Foxfold 1 Quote
lawson56 Posted September 7, 2021 Report Posted September 7, 2021 Now that is an Awesome job!! Foxfold 1 Quote
Woodrush Posted September 7, 2021 Report Posted September 7, 2021 7 hours ago, Foxfold said: Must admit, it's the best Rottie pattern that I've ever seen. ! Jim did that for me as well as a photo I sent before christmas. Amazing guy and amazing pattern designer Jim Blume 1 Quote
heppnerguy Posted September 8, 2021 Report Posted September 8, 2021 an absolutely beautiful job on this pattern. I also have this pattern but have no idea when I am going to get to it. Dick heppnerguy Foxfold 1 Quote
wombatie Posted September 8, 2021 Report Posted September 8, 2021 That is a great looking pattern and you certainly nailed it, well done. Marg Quote
Jim Blume Posted September 8, 2021 Report Posted September 8, 2021 Awesome job. You even made my pattern look grand. Always rewarding to me to see what folks are able to do with these patterns. Thanks for showing us your work. Also, to save folks from having to hunt through the files for the pattern, here you go. Woodrush, namunolie and Foxfold 1 2 Quote
namunolie Posted September 8, 2021 Report Posted September 8, 2021 Look Awesome very clean and nice cutting Foxfold 1 Quote
namunolie Posted September 8, 2021 Report Posted September 8, 2021 5 minutes ago, Jim Blume said: Awesome job. You even made my pattern look grand. Always rewarding to me to see what folks are able to do with these patterns. Thanks for showing us your work. Also, to save folks from having to hunt through the files for the pattern, here you go. it is Beautiful pattern,thanks for sharing have a good day~ Quote
Foxfold Posted September 8, 2021 Author Report Posted September 8, 2021 (edited) 1 hour ago, Jim Blume said: Awesome job. You even made my pattern look grand. Always rewarding to me to see what folks are able to do with these patterns. Thanks for showing us your work. Goodness, I'm flattered and humbled, but I can assure you that a brilliant pattern goes a long way to making a cutter look good too.! Thank you for your kind words, they are very much appreciated. May I ask a question without causing offense ? I've been asked where this pattern could be bought from and I have no idea. Do you have a 'site' where I can direct interested people to ? I don't like to 'share' other peoples patterns as I know it's frowned upon in the scrollsaw world. With Kind Regards. Brenda Edited September 8, 2021 by Foxfold Quote
heppnerguy Posted September 9, 2021 Report Posted September 9, 2021 22 hours ago, Foxfold said: Goodness, I'm flattered and humbled, but I can assure you that a brilliant pattern goes a long way to making a cutter look good too.! Thank you for your kind words, they are very much appreciated. May I ask a question without causing offense ? I've been asked where this pattern could be bought from and I have no idea. Do you have a 'site' where I can direct interested people to ? I don't like to 'share' other peoples patterns as I know it's frowned upon in the scrollsaw world. With Kind Regards. Brenda you have most likely seen where Jim Blume, the pattern maker, posted it a couple of hits above, for those that might be interested in acquiring this pattern Dick heppnerguy Woodrush 1 Quote
Foxfold Posted September 9, 2021 Author Report Posted September 9, 2021 38 minutes ago, heppnerguy said: you have most likely seen where Jim Blume, the pattern maker, posted it a couple of hits above, for those that might be interested in acquiring this pattern I've seen the pattern, but the gentleman that asked for a copy doesn't belong to this forum so I thought I'd ask first as I have no wish to offend anyone or fall foul of the scrollsaw worlds rules. heppnerguy 1 Quote
rdatelle Posted September 10, 2021 Report Posted September 10, 2021 Again Brenda, great job. Foxfold 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.