Popular Post FrankEV Posted September 8, 2021 Popular Post Report Share Posted September 8, 2021 (edited) I converted this pattern I found on-line and modified it to make it an 11” square scroll saw pattern. Had to add some bridges and modified the pumpkin shape a little to make the letters to read better. Both the cut panel and backer is ¼” thk BB Ply cut with Pegas #0 MGT R blades. The panels were hand painted with Acrylic Artist Paints and protected with multiple coats of clear gloss spray Polyurethane, as this piece will hang outside on the front of my home. And again, the Frame is Poplar…oh yeah, that’s right, there is no frame Critique and comments always appreciated. EDIT PS: Just sitting here looking at the pic and realized this would be a great pattern to use with a back lit orange plastic backer. Edited September 8, 2021 by FrankEV frankorona, Charlie E, TripleJScroller and 10 others 13 Quote Link to comment Share on other sites More sharing options...
preprius Posted September 8, 2021 Report Share Posted September 8, 2021 (edited) For my application (California) I would need to add smoke , flames, and burnt trees and then say "Fall" or fallen. Or add "No" Fall zone. We dont have seasons here. Good looking project. Hey if you do another one with Red you can say "spring". Red for tomatoes. Edited September 8, 2021 by preprius FrankEV 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted September 8, 2021 Author Report Share Posted September 8, 2021 52 minutes ago, preprius said: ... We dont have seasons here... Us either, only by the caendar. Quote Link to comment Share on other sites More sharing options...
jr42 Posted September 9, 2021 Report Share Posted September 9, 2021 looks nice like the colors FrankEV 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted September 9, 2021 Report Share Posted September 9, 2021 Well done! God Bless! Spirithorse FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted September 9, 2021 Report Share Posted September 9, 2021 Excellent artistry, Frank. Yes, that would be difficult to frame... unless you added an additional backer board. Hope you post a picture if you add the lighting. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted September 9, 2021 Report Share Posted September 9, 2021 great job, it's beautiful FrankEV 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted September 9, 2021 Report Share Posted September 9, 2021 As i have mentioned several times, I love your work and creativity. Always great Dick heppnerguy FrankEV 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted September 10, 2021 Report Share Posted September 10, 2021 Nice job Frank. Your painting is off the charts. How do you get that kind of finish on them. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted September 10, 2021 Author Report Share Posted September 10, 2021 1 hour ago, rdatelle said: Nice job Frank. Your painting is off the charts. How do you get that kind of finish on them. The hardest poart of the painting is the edges...they are one SPTA. When everything is painted and dry, I affix the cut panel to the backer, clamp and dry at leat 4 hours. Often, after unclamping, touch up painting is required, no matter how careful I was. I always seem to find some spot I missed or the worng color became exposed, etc. For something like this plaque and my frames I use poly as a protective coat. In this case 3 coats of clear Gloss Spray Poly. I prefer wipe-on poly for my frames. I do back, dry, flip and do front, dry, second coat, dry, filip, second coat onf back, dry, flip, very light sanding is any needed, third coat, dry. Add hanger on back. Finished. BTW, things do look better in the photo. Close up and personel you can see many flaws.. but as often quoted in NY; "You will never see them from Brooklyn"!!!! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted September 10, 2021 Report Share Posted September 10, 2021 I like it Frank! Great job on the colors and finishing. Fall is my favorite season. If there are flaws I can't see them from Alabama! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 11, 2021 Report Share Posted September 11, 2021 Very colorful Frank. We call it Autumn and it's my favorite season also. Marg FrankEV 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted September 11, 2021 Report Share Posted September 11, 2021 Now that is Fantastic!! Beautiful work. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.