OCtoolguy Posted October 8, 2021 Report Share Posted October 8, 2021 (edited) I ran across this fellow's channel the other day and even though it's all in German, I was able to decipher most of it. There is a setting to translate into English. https://www.youtube.com/user/FEINESausWUPPERTAL/featured He has some things that might interest most any scroller. And in some of his videos he has a Pegas too. I just watched how he managed to cut an 80 millimeter piece of wood on his Hegner by using some bandsaw blade material for a longer blade and open up the spread of his saw. Thinking outside of the box. Edited October 8, 2021 by OCtoolguy kmmcrafts, jr42, BadBob and 2 others 3 2 Quote Link to comment Share on other sites More sharing options...
BadBob Posted October 9, 2021 Report Share Posted October 9, 2021 After spending the best part of two days trying to compound cut reindeer on a band saw, I watched him cut them, and now I'm drooling for a Pegas band saw. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted October 9, 2021 Author Report Share Posted October 9, 2021 3 hours ago, BadBob said: After spending the best part of two days trying to compound cut reindeer on a band saw, I watched him cut them, and now I'm drooling for a Pegas band saw. I'm so sorry to have cost you money. How bad do you need that reindeer head? Lol. Quote Link to comment Share on other sites More sharing options...
BadBob Posted October 10, 2021 Report Share Posted October 10, 2021 19 hours ago, OCtoolguy said: I'm so sorry to have cost you money. How bad do you need that reindeer head? Lol. I was trying to cut an enlarged set of reindeer designed for a scroll saw that I found in an old magazine. A customer wants them 10-inches tall. It has proved challenging. It looks like the Pegas bandsaw would make these easily. These are about 3-inches tall. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted October 10, 2021 Author Report Share Posted October 10, 2021 4 hours ago, BadBob said: I was trying to cut an enlarged set of reindeer designed for a scroll saw that I found in an old magazine. A customer wants them 10-inches tall. It has proved challenging. It looks like the Pegas bandsaw would make these easily. These are about 3-inches tall. Can't they be cut lying on their sides? Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 10, 2021 Report Share Posted October 10, 2021 I think at 10" tall they would be around 3" thick.. or more.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted October 10, 2021 Author Report Share Posted October 10, 2021 32 minutes ago, Scrappile said: I think at 10" tall they would be around 3" thick.. or more.. Ya just have to open up the arms on your Hegner. Quote Link to comment Share on other sites More sharing options...
BadBob Posted October 11, 2021 Report Share Posted October 11, 2021 13 hours ago, Scrappile said: I think at 10" tall they would be around 3" thick.. or more.. Yes, but the block of wood must be thicker by at least 1/4-inch. I like to have 1/4-inch all round. Using 3/4-inch stock that is 4-5 pieces to glue up. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted October 11, 2021 Report Share Posted October 11, 2021 On 10/9/2021 at 2:33 PM, BadBob said: After spending the best part of two days trying to compound cut reindeer on a band saw, I watched him cut them, and now I'm drooling for a Pegas band saw. It can be done on a bandsaw, I do them every winter along with my 'dog man' OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted October 11, 2021 Author Report Share Posted October 11, 2021 7 hours ago, Foxfold said: It can be done on a bandsaw, I do them every winter along with my 'dog man' Great stuff! Foxfold 1 Quote Link to comment Share on other sites More sharing options...
rash_powder Posted October 19, 2021 Report Share Posted October 19, 2021 I made reindeers from a 2x4 of cedar on my 14" Delta bandsaw. Just mount up the smallest blade you can find, I think I used a 1/8" blade. There is a guide from Clark, I believe, that helps make tight turns a bit easier. I have one, but the product name eludes me at the moment. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted October 19, 2021 Report Share Posted October 19, 2021 15 minutes ago, rash_powder said: I made reindeers from a 2x4 of cedar on my 14" Delta bandsaw. Just mount up the smallest blade you can find, I think I used a 1/8" blade. There is a guide from Clark, I believe, that helps make tight turns a bit easier. I have one, but the product name eludes me at the moment. Think the name is Carter? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted October 19, 2021 Report Share Posted October 19, 2021 On 10/11/2021 at 4:40 AM, BadBob said: Yes, but the block of wood must be thicker by at least 1/4-inch. I like to have 1/4-inch all round. Using 3/4-inch stock that is 4-5 pieces to glue up. Just buy the bandsaw.. you know you want it anyway, .. Tax write off for the business too.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
BadBob Posted October 20, 2021 Report Share Posted October 20, 2021 15 hours ago, kmmcrafts said: Just buy the bandsaw.. you know you want it anyway, .. Tax write off for the business too.. Currently, there are none to be had anywhere. They are probably sitting on a container ship somewhere. OCtoolguy and kmmcrafts 1 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.