Jump to content
🎄 🎄 🎄 2024 Custom Ornament Business Kit - Now Available - SALE 50% Off Through Dec. 2nd ×
Ornaments For Charity eBook - Designers Wanted! ​​​​​​​🙏 ×

Santa House Plaque


FrankEV

Recommended Posts

2 hours ago, FrankEV said:

This is a recent Steve Good pattern that I increased in size and cut from 12” x 12” panels. Slightly modified to eliminate the hanging holes and added a forth backer layer to allow the words to be painted.  The piece is three layers of 1/8” BB Ply and a 1/4” BB Ply backer for a total 5/8” thick plaque.   Painting was done with a combination of Rattle can spray paints and Artist Acrylic paints.  The plaque perimeter was cut after painting and the panels were assembled.  The plaque was protected with multiple coats of Clear Gloss Spray Polyurethane, as this will hang outside on my house for the month of December.

I was sloppy in cleaning and sanding as some fuzzies can be seen in the photo that are not so apparent in person viewing unless you get up very close.   It is hard to clean off fuzzies after the panels were painted.    

1172209041_Santahouse-Good.thumb.jpg.5dd176c5c86db808e40eda657831d7dc.jpg

 

Yes, I tried to make the full moon look real in a stary sky.

Hope you enjoy.  As always comments and critiques are welcomed.

Thanks for posting this. I look forward to seeing everything you  make. Always enjoyable to see 

Dick

heppnerguy

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...