Popular Post FrankEV Posted October 17, 2021 Popular Post Report Share Posted October 17, 2021 This is a recent Steve Good pattern that I increased in size and cut from 12” x 12” panels. Slightly modified to eliminate the hanging holes and added a forth backer layer to allow the words to be painted. The piece is three layers of 1/8” BB Ply and a 1/4” BB Ply backer for a total 5/8” thick plaque. Painting was done with a combination of Rattle can spray paints and Artist Acrylic paints. The plaque perimeter was cut after painting and the panels were assembled. The plaque was protected with multiple coats of Clear Gloss Spray Polyurethane, as this will hang outside on my house for the month of December. I was sloppy in cleaning and sanding as some fuzzies can be seen in the photo that are not so apparent in person viewing unless you get up very close. It is hard to clean off fuzzies after the panels were painted. Yes, I tried to make the full moon look real in a stary sky. Hope you enjoy. As always comments and critiques are welcomed. munzieb, jr42, Foxfold and 13 others 16 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted October 17, 2021 Report Share Posted October 17, 2021 2 hours ago, FrankEV said: This is a recent Steve Good pattern that I increased in size and cut from 12” x 12” panels. Slightly modified to eliminate the hanging holes and added a forth backer layer to allow the words to be painted. The piece is three layers of 1/8” BB Ply and a 1/4” BB Ply backer for a total 5/8” thick plaque. Painting was done with a combination of Rattle can spray paints and Artist Acrylic paints. The plaque perimeter was cut after painting and the panels were assembled. The plaque was protected with multiple coats of Clear Gloss Spray Polyurethane, as this will hang outside on my house for the month of December. I was sloppy in cleaning and sanding as some fuzzies can be seen in the photo that are not so apparent in person viewing unless you get up very close. It is hard to clean off fuzzies after the panels were painted. Yes, I tried to make the full moon look real in a stary sky. Hope you enjoy. As always comments and critiques are welcomed. Thanks for posting this. I look forward to seeing everything you make. Always enjoyable to see Dick heppnerguy danny and FrankEV 2 Quote Link to comment Share on other sites More sharing options...
danny Posted October 17, 2021 Report Share Posted October 17, 2021 I think Yours is Much Better looking than mine. But Your are the Painter Pro. :+} FrankEV 1 Quote Link to comment Share on other sites More sharing options...
jr42 Posted October 17, 2021 Report Share Posted October 17, 2021 looks really nice. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted October 18, 2021 Report Share Posted October 18, 2021 It look terrific. I love the way you did the moon, definitely more moon like. BTW so does ours. Marg FrankEV 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted October 18, 2021 Report Share Posted October 18, 2021 I know what ya mean about the full moon, I have done the same thing in the past. You done a Most Excellent job!! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted October 18, 2021 Report Share Posted October 18, 2021 that is a fantastic job FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.