Popular Post FrankEV Posted January 12, 2022 Popular Post Report Posted January 12, 2022 (edited) I ran across this line image on-line and just had to convert it to a Scroll saw Pattern. I sized it to fit centered on a 5/32” x 12”x 12” Solid Core Maple Ply panel that I affixed to a Hand Painted ¼” thick BB Ply backer. The Tree of Life pattern needed a bit of work to eliminate a lot of dropouts. Also a lot of bridges added to the font letters. The lettering font of the lyrics to the song “Trees of Green” was very irregular shapes which made cutting with a spiral blade simple. Pegas #2/0 and #0 blades were used to do all the cutting. The Panel is set loose in a 1 3/4” wide Poplar Frame stained with Minwax Dark Walnut Stain and protected with multiple coats of Minwax Clear Gloss Wipe on Poly. Comments and critique welcome. Edited January 12, 2022 by FrankEV TripleJScroller, Hawk, lawson56 and 27 others 28 2 Quote
munzieb Posted January 12, 2022 Report Posted January 12, 2022 Outstanding. You just keep getting better and better! FrankEV, OCtoolguy and danny 2 1 Quote
daveww1 Posted January 12, 2022 Report Posted January 12, 2022 fantastic job FrankEV, danny and OCtoolguy 2 1 Quote
CSull Posted January 12, 2022 Report Posted January 12, 2022 As always -perfection! FrankEV, danny and OCtoolguy 2 1 Quote
preprius Posted January 12, 2022 Report Posted January 12, 2022 Very good Frank. The shape of the lyrics form an old record 33 rpm. OCtoolguy and FrankEV 1 1 Quote
Gordster Posted January 12, 2022 Report Posted January 12, 2022 Fantastic work all around Frank,pattern and cutting....love it... OCtoolguy, danny and FrankEV 2 1 Quote
Dak0ta52 Posted January 12, 2022 Report Posted January 12, 2022 Now this I like! Besides being beautiful, I would consider it to be very "Clean" looking. NICE! OCtoolguy and FrankEV 1 1 Quote
heppnerguy Posted January 12, 2022 Report Posted January 12, 2022 I have to agree with tho others. This is a great and beautiful project. Thanks for the inspiration and for posting it. Dick heppnerguy FrankEV, OCtoolguy and danny 2 1 Quote
wombatie Posted January 13, 2022 Report Posted January 13, 2022 Lovely. You did a great job Frank. I'm not sure but I think the song is actually 'What a Wonderful World' by Louis Armstrong. Marg OCtoolguy, FrankEV and Scrolling Steve 2 1 Quote
FrankEV Posted January 13, 2022 Author Report Posted January 13, 2022 7 hours ago, wombatie said: ...I'm not sure but I think the song is actually 'What a Wonderful World' ... I believe you are correct! OCtoolguy and danny 2 Quote
Jim Blume Posted January 14, 2022 Report Posted January 14, 2022 That came out beautiful. Well done all around. OCtoolguy, danny and FrankEV 2 1 Quote
rdatelle Posted January 17, 2022 Report Posted January 17, 2022 WoW Frank, that is just awesome. I would love to try and cut that but i'm not sure if I do that. FrankEV and OCtoolguy 1 1 Quote
danny Posted January 17, 2022 Report Posted January 17, 2022 Always a kind of Master Piece there. Love the Words and You put them to Perfection. Love the Song too. Great color and Scrolling. Danny :+} OCtoolguy and FrankEV 1 1 Quote
FrankEV Posted January 18, 2022 Author Report Posted January 18, 2022 9 hours ago, rdatelle said: WoW Frank, that is just awesome. I would love to try and cut that but i'm not sure if I do that. Relatively easy cut. Spiral #2/0 and #0 blades work best. No straight lines to worry about. Give it a shot...what do you have to lose. Can always use it for firewood. OCtoolguy 1 Quote
Fish Posted January 19, 2022 Report Posted January 19, 2022 Beautiful work! OCtoolguy and FrankEV 1 1 Quote
GusGustin Posted June 22, 2022 Report Posted June 22, 2022 Where can ya get the pattern for this one .. it looks like it would be a VERY FUN cut to do. OCtoolguy 1 Quote
FrankEV Posted June 22, 2022 Author Report Posted June 22, 2022 3 hours ago, GusGustin said: Where can ya get the pattern for this one .. it looks like it would be a VERY FUN cut to do. I posted the pattern on Feb 11 in New Pattern Announcements GusGustin and OCtoolguy 1 1 Quote
OCtoolguy Posted June 23, 2022 Report Posted June 23, 2022 Great job Frank. I love all of the "Tree of Life" patterns that have been done but yours stands out from the others. FrankEV 1 Quote
Scrolling Steve Posted June 23, 2022 Report Posted June 23, 2022 Nice, Very nice! FrankEV and OCtoolguy 1 1 Quote
GusGustin Posted June 25, 2022 Report Posted June 25, 2022 Got it Frank .. It's on my list of THINGS TO DO .. FrankEV 1 Quote
amazingkevin Posted June 26, 2022 Report Posted June 26, 2022 I,m giving you the proud award!!! FrankEV 1 Quote
Blaughn Posted June 27, 2022 Report Posted June 27, 2022 I like it a bunch BUT - how do I get Louis Armstrong out of my brain now? FrankEV 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.