kmmcrafts Posted February 10, 2022 Report Share Posted February 10, 2022 (edited) Just seen Bearwood posted on FB that Pegas has a 30" saw in the works.. Hmm.. Heck, I only need the 21 and honestly wouldn't mind a 16".. Guess I don't do many large projects anymore.. Keeping my eye out for used 21"s and found one recently that I'm watching.. hoping it don't sell so I can make a offer.. With the 30 coming out maybe someone wants to upgrade to the bigger one and sell me the old one, LOL https://www.bearwood.com/product7978.html Edited February 10, 2022 by kmmcrafts RabidAlien, OCtoolguy and GrampaJim 1 1 1 Quote Link to comment Share on other sites More sharing options...
trackman Posted February 10, 2022 Report Share Posted February 10, 2022 For $1,400 I will keep my old EX21 an cut away thinking it is new. kmmcrafts and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted February 10, 2022 Report Share Posted February 10, 2022 OK Kevin. Travis is going to scold you for putting scroller internet porn links on the forum. Actually, I'd be happy with the standard 21. A 30-inch throat is almost twice what I have now. OCtoolguy and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
TAIrving Posted February 10, 2022 Report Share Posted February 10, 2022 I have the 21" Pegas and love it, it is a great saw. But I don't really need that big a saw and would be well served with one in the 16" - 18" range. OCtoolguy and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted February 10, 2022 Report Share Posted February 10, 2022 There has been a handful of times that a 30” saw would have been great a 21” model suits me fine. I have actually cut a 30” door topper on a 21” saw using flat blades. It required putting the blade in backwards for a few cuts. Doable but it takes practice. OCtoolguy, WayneMahler and kmmcrafts 2 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 10, 2022 Report Share Posted February 10, 2022 Actually, I would like to see the 16" available in the US. OCtoolguy, Rolf, GrampaJim and 1 other 4 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 10, 2022 Author Report Share Posted February 10, 2022 1 hour ago, Denny Knappen said: Actually, I would like to see the 16" available in the US. Me too.. do you know if Pegas actually makes a 16" ? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 10, 2022 Report Share Posted February 10, 2022 26 minutes ago, kmmcrafts said: Me too.. do you know if Pegas actually makes a 16" ? You can always buy the King. I think they are available through Woodcraft. Not positive. Quote Link to comment Share on other sites More sharing options...
timelett Posted February 10, 2022 Report Share Posted February 10, 2022 I don't think I could hide another saw in my shop. kmmcrafts 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 11, 2022 Author Report Share Posted February 11, 2022 (edited) 3 hours ago, OCtoolguy said: You can always buy the King. I think they are available through Woodcraft. Not positive. They don't have cool colors though, Maybe I can paint my EX-21 with the leftover candy paints from a custom flames paint job I did on a Harley last summer.. Make it a 1 of a kind rare EX-21 China version.. Maybe someone would trade for a Pegas then, LOL Edit: Never mind.. that paint cost more than a new Pegas 30 inch so not a good idea, LOL Edited February 11, 2022 by kmmcrafts Rolf and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
John B Posted February 11, 2022 Report Share Posted February 11, 2022 To be quite honest I'd love to see any of the Pegas saws available in Oz. and from a different dealer than Timbercon OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rolf Posted February 11, 2022 Report Share Posted February 11, 2022 (edited) 14 hours ago, kmmcrafts said: They don't have cool colors though, Maybe I can paint my EX-21 with the leftover candy paints from a custom flames paint job I did on a Harley last summer.. Make it a 1 of a kind rare EX-21 China version.. Maybe someone would trade for a Pegas then, LOL Edit: Never mind.. that paint cost more than a new Pegas 30 inch so not a good idea, LOL I know this is off topic but I am blown away by what some of the paints cost. My neighbor owns a body shop. Regarding the big saws I have the Hawk G4 26 and the swing has been useful until you try to turn it towards you. I would have to section my body. Is that $1399 Canadian? Edited February 11, 2022 by Rolf GrampaJim, kmmcrafts and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 11, 2022 Report Share Posted February 11, 2022 19 hours ago, kmmcrafts said: Me too.. do you know if Pegas actually makes a 16" ? I believe it is available in Europe. kmmcrafts and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 11, 2022 Author Report Share Posted February 11, 2022 (edited) 2 hours ago, Rolf said: I know this is off topic but I am blown away by what some of the paints cost. My neighbor owns a body shop. Regarding the big saws I have the Hawk G4 26 and the swing has been useful until you try to turn it towards you. I would have to section my body. Is that $1399 Canadian? Right, I've paid upwards of $1200 for a pint of paint in the past for custom work I used to do and that was some years back.. Gotta be good at knowing how much you need to mix for the job as wasting a once get's pretty when you have a ounce leftover from job.. Once the catalyst is in it it's only good for a few hours.. I did the body shop gig for a few years.. I've had some projects that was big enough that I couldn't sit at the saw.. that swing around can get you in the gut.. and I don't even have a bigger gut.. so.. yeah my hats off to those that do those bigger projects.. I can do them.. but I don't like doing them, I'm lazy and like a sit down job, I sell a few of these guitars ( Steve Good Pattern) every couple months I have to stack cut it 3 at a time to replenish my inventory.. I think it's only about 16" or maybe it's 18" long.. But anyway, I sit but I have to scoot my stool back and lean forward to see the saw line etc.. That's about the biggest project I want to make.. sometimes dread making it.. Good seller though so... LOL Edited February 11, 2022 by kmmcrafts NC Scroller and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
CSull Posted February 11, 2022 Report Share Posted February 11, 2022 Instead of a larger saw for large cuts I bought a work table from the orange store that raises and lowers. It is on casters so I just roll it over to the saw and level it with the saws table, works great. OCtoolguy, ChelCass, Dave Monk and 4 others 7 Quote Link to comment Share on other sites More sharing options...
rjweb Posted February 11, 2022 Report Share Posted February 11, 2022 very good idea, what is that green thing above the table, RJ OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted February 11, 2022 Author Report Share Posted February 11, 2022 8 minutes ago, rjweb said: very good idea, what is that green thing above the table, RJ Looks like a wall mount dust collector.. The bag is white and hard to see since the background wall is white too.. but if you look at the hose going to the metal can and another hose going off that to where ever the sawdust is being collected.. Only reason I know this is I've been looking at them, LOL.. I have the big floor model but.. I could free up floor space for the Pegas saw if I also get a wall mount collector, OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
CSull Posted February 12, 2022 Report Share Posted February 12, 2022 Yep, Grizzly dust collector with trash can separator. Works great on one tool at a time in my limited space. Quote Link to comment Share on other sites More sharing options...
ChelCass Posted February 12, 2022 Report Share Posted February 12, 2022 Steve Good's newletter had the 30 inch saw this morning. I figured the price would be up there. Guess I will keep my old trusty saw. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted February 13, 2022 Report Share Posted February 13, 2022 5 hours ago, ChelCass said: Steve Good's newletter had the 30 inch saw this morning. I figured the price would be up there. Guess I will keep my old trusty saw. For that $1400, I have bought a Dewalt 12" miter saw, a Delta 14" bandsaw, 2 Excaliburs, 1 Hegner and a Delta 10 drill press. All used of course but what the heck, money IS money. Especially at my age. ChelCass, John B and kmmcrafts 3 Quote Link to comment Share on other sites More sharing options...
clocks and more Posted February 18, 2022 Report Share Posted February 18, 2022 i was looking for a 30inch saw and Pegas did not have one. so three weeks ago I bought a King, Just my luck aday short. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.