Charlie E Posted March 8, 2022 Report Share Posted March 8, 2022 Had to make my first minor repair on my Hegner and thought I'd share the problem in case any Hegner users haven't run into it yet. The tension lever started slipping out of the locked/back position occasionally and got worse over time. The issue was the nylon tension lever rollers had worn a flat spot in them. They are very cheap at Advanced Machinery, less than $2 a pair I think, so I ordered 4 sets along with the clips that hold them on. Back to normal now. Jim Finn, OCtoolguy, stoney and 2 others 5 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 8, 2022 Report Share Posted March 8, 2022 I made sure to keep a drop of oil on the roller axles so they will roll when being applied or unapplied. So far so good. Put a dot on each one with a marker so you can tell they actually roll. Charlie E 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted March 8, 2022 Author Report Share Posted March 8, 2022 8 minutes ago, OCtoolguy said: I made sure to keep a drop of oil on the roller axles so they will roll when being applied or unapplied. So far so good. Put a dot on each one with a marker so you can tell they actually roll. Good idea. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 8, 2022 Report Share Posted March 8, 2022 A dry lube might keep the sawdust from sticking to the oil and creating a gooey mess.. Charlie E and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
stoney Posted March 8, 2022 Report Share Posted March 8, 2022 What I have done from the time I bought my Hegner is to blow the accumulated sawdust off the rollers and ramp regularly. I received a extra set of rollers and clips when I bought my saw in 2008 but haven't had to use them yet. OCtoolguy and Charlie E 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 8, 2022 Report Share Posted March 8, 2022 5 hours ago, kmmcrafts said: A dry lube might keep the sawdust from sticking to the oil and creating a gooey mess.. I've not had a problem. Just a tiny dot of oil is all it takes. stoney 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.