Popular Post Denny Knappen Posted March 8, 2022 Popular Post Report Share Posted March 8, 2022 Trivet #1 and Trivet #2 of a set of 8 designed by Sue Mey and finally finished. The Trivet #1 wood is 1/2" Walnut 8" square. The Trivet #2 wood is 1/2" Cherry 8" square. Cut on the Pegas scroll saw using Pegas #3R MGT blades. After sanding, dipped in BLO, dried for a day, sanded again, dipped in BLO again, final sanding and then a light rubbing with paste wax. Comments welcome. GrampaJim, scrollerpete, JAC1961 and 19 others 22 Quote Link to comment Share on other sites More sharing options...
flarud Posted March 8, 2022 Report Share Posted March 8, 2022 Both are cool.. but I'm leaning towards the Cherry a bit more. Well done. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 8, 2022 Author Report Share Posted March 8, 2022 33 minutes ago, flarud said: Both are cool.. but I'm leaning towards the Cherry a bit more. Well done. Thanks Barry. Yes, I like the Cherry, but I use what I have. Two more will be Cherry and four will be Ash. Quote Link to comment Share on other sites More sharing options...
rjweb Posted March 9, 2022 Report Share Posted March 9, 2022 Another beautiful job Denny, RJ Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 9, 2022 Author Report Share Posted March 9, 2022 16 minutes ago, rjweb said: Another beautiful job Denny, RJ Thanks RJ. Actually fun to cut. Quote Link to comment Share on other sites More sharing options...
scrollerpete Posted March 9, 2022 Report Share Posted March 9, 2022 You have been busy Denny, real nice cutting. Quote Link to comment Share on other sites More sharing options...
TAIrving Posted March 9, 2022 Report Share Posted March 9, 2022 Very nice Denny. Sounds like you are planning to do the full 8 trivet set from Sue Mey's pattern. Will be watching to see the others. Quote Link to comment Share on other sites More sharing options...
daveww1 Posted March 9, 2022 Report Share Posted March 9, 2022 great job Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 9, 2022 Author Report Share Posted March 9, 2022 16 hours ago, scrollerpete said: You have been busy Denny, real nice cutting. Thanks Pete. A fun easy cut. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 9, 2022 Author Report Share Posted March 9, 2022 4 hours ago, TAIrving said: Very nice Denny. Sounds like you are planning to do the full 8 trivet set from Sue Mey's pattern. Will be watching to see the others. Thanks. Two are dripping dry, one is cut ready to sand and three more still to cut. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 9, 2022 Author Report Share Posted March 9, 2022 6 hours ago, daveww1 said: great job Thanks Dave. Fun projects. Quote Link to comment Share on other sites More sharing options...
wombatie Posted March 10, 2022 Report Share Posted March 10, 2022 They look terrific Denny. I especially like the second one. Marg Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 10, 2022 Author Report Share Posted March 10, 2022 11 hours ago, wombatie said: They look terrific Denny. I especially like the second one. Marg Thanks Marg. Two more made from Cherry. Maybe posting later wombatie 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted March 10, 2022 Report Share Posted March 10, 2022 Cutting of both is fanominal!! However, unlike most others, I have a little difficuty with the Cherry. The pronounced, somewhat diagonal, straight grain seems to detract from the symetry of the cutting. I supposed if lying on a table under a pot or the like it would not matter, But, if it will be displayed as decorative piece it bothers my semces. Cherry is beautiful wood, but it it seems hard to make work in a lot of projects. I find Cherry needs to embelshed with stain to brighten it in most projects. Trivets in general, as these are, do not seem to need a strong grain but look better in wood with a lack of visable grain. Remember, this is just me comenting. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted March 11, 2022 Author Report Share Posted March 11, 2022 21 hours ago, FrankEV said: Cutting of both is fanominal!! However, unlike most others, I have a little difficuty with the Cherry. The pronounced, somewhat diagonal, straight grain seems to detract from the symetry of the cutting. I supposed if lying on a table under a pot or the like it would not matter, But, if it will be displayed as decorative piece it bothers my semces. Cherry is beautiful wood, but it it seems hard to make work in a lot of projects. I find Cherry needs to embelshed with stain to brighten it in most projects. Trivets in general, as these are, do not seem to need a strong grain but look better in wood with a lack of visable grain. Remember, this is just me comenting. Thanks for the comments, Frank. Always appreciated. I did not have a lot of 1/2" stock to chose from, so I used what I had. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Jaguarguy Posted March 12, 2022 Report Share Posted March 12, 2022 Great work Denny! The wife has asked for a couple of trivets for the kitchen. Looks like I'm going to have to find some 1/2" wood! Quote Link to comment Share on other sites More sharing options...
pet-design Posted March 13, 2022 Report Share Posted March 13, 2022 Hi Denny! Fine works - hope to see more! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.