OCtoolguy Posted March 12, 2022 Report Share Posted March 12, 2022 I'm a bit worried about Paul (Scrappile). Haven't seen anything from him in a while. Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 12, 2022 Report Share Posted March 12, 2022 I was thinking the same thing a while ago.. then I went and checked his profile page that showed he had logged in recently.. I just went to look and he had last logged on Sunday night. OCtoolguy, don watson, Dave Monk and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 12, 2022 Report Share Posted March 12, 2022 Sometimes in the summer we don't see much of him but usually in the winter he is pretty active on here. Hope he's OK OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted March 12, 2022 Report Share Posted March 12, 2022 Like you guys, I too had wondered about Paul @Scrappile and I had checked his profile a few days ago and had seen he had been online recently. I know from time to time he takes a break from regularly posting. Hope he knows we miss him when he does, but we understand as well. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 12, 2022 Author Report Share Posted March 12, 2022 I did PM him but no reply yet. Quote Link to comment Share on other sites More sharing options...
rjweb Posted March 12, 2022 Report Share Posted March 12, 2022 Also what about Kevin, haven’t seen him here for a while, I know he has been having a hard time with his health for a while, RJ OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 12, 2022 Author Report Share Posted March 12, 2022 2 hours ago, rjweb said: Also what about Kevin, haven’t seen him here for a while, I know he has been having a hard time with his health for a while, RJ The only Kevin I know on here just posted above you. Quote Link to comment Share on other sites More sharing options...
dgman Posted March 13, 2022 Report Share Posted March 13, 2022 1 hour ago, OCtoolguy said: The only Kevin I know on here just posted above you. He meant Amazing Kevin OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 13, 2022 Report Share Posted March 13, 2022 4 hours ago, rjweb said: Also what about Kevin, haven’t seen him here for a while, I know he has been having a hard time with his health for a while, RJ Jerry and Kevin communicate on FB from time to time.. I think this is the last time we have heard any updates.. I thought there was a different one but I couldn't find it.. for some reason I thought there was one stating he had Covid and wasn't doing all that good.. Hope he is better now.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Scrappile Posted March 13, 2022 Popular Post Report Share Posted March 13, 2022 Hey all. Thanks for the thoughts. I am Okay. But very busy... Around Dec, 1st I had a second stroke. But I am still up right and functioning. I don't have alot of time here, because my wife also ended up in the hospital again with breathing problems... So now she is tethered to an oxygen machine all the time. So she can only go around 50 feet... And I do most the cleaning, washing and cooking now. keeps me busy.. When we do go together we are on a timer, her little carry machine runs about 4 hours on a battery. It is a good timer, that is really all the longer she has the stamina for.. I always take an extra battery and an oxygen take, for just incase we get delayed. So this is our life now... Not complaining, we have had good lives and it is our time to slow down now. She can still do a little quilting and I'm getting proficient enough at my chores that I am getting a little time in the shop again... In fact I did finish one project I started some time ago. I had it all cit out, just need finishing... It is called the Blois Goblet, a Finescrollsaw pattern. And I am doing a little work on my Woozle Bird.. Dan, meflick, Fish and 13 others 13 3 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted March 13, 2022 Report Share Posted March 13, 2022 Nicely done, Paul, and nice to hear from you again. Sorry to hear about the stroke and your wife's breathing trouble. Prayers sent to you and your family. God Bless! Spirithorse OCtoolguy, stoney and Scrappile 2 1 Quote Link to comment Share on other sites More sharing options...
Fedido Posted March 13, 2022 Report Share Posted March 13, 2022 Glad your still with us. Hope things work out better. OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 13, 2022 Report Share Posted March 13, 2022 1 hour ago, Scrappile said: Hey all. Thanks for the thoughts. I am Okay. But very busy... Around Dec, 1st I had a second stroke. But I am still up right and functioning. I don't have alot of time here, because my wife also ended up in the hospital again with breathing problems... So now she is tethered to an oxygen machine all the time. So she can only go around 50 feet... And I do most the cleaning, washing and cooking now. keeps me busy.. When we do go together we are on a timer, her little carry machine runs about 4 hours on a battery. It is a good timer, that is really all the longer she has the stamina for.. I always take an extra battery and an oxygen take, for just incase we get delayed. So this is our life now... Not complaining, we have had good lives and it is our time to slow down now. She can still do a little quilting and I'm getting proficient enough at my chores that I am getting a little time in the shop again... In fact I did finish one project I started some time ago. I had it all cit out, just need finishing... It is called the Blois Goblet, a Finescrollsaw pattern. And I am doing a little work on my Woozle Bird.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 13, 2022 Report Share Posted March 13, 2022 Just now, Dave Monk said: Glad to hear from you. That would sure be a tough project to get those miters to fit well. Hope the best for you and your wife. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted March 13, 2022 Report Share Posted March 13, 2022 Hang in there Paul. OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted March 13, 2022 Report Share Posted March 13, 2022 Paul, I’m sorry to hear of yours and your lovely wife’s health struggles. I’m glad you are doing better after your stroke. I understand the issues your wife is having. My MIL dealt with similar. It’s difficult on you both I’m sure. I’m pretty sure also that your family doesn’t live very close to be able to help. Prayers said for you both. I’m glad to hear you get a little shop time and she can still do a little quilting. Having things to keep you focused and working is good. Your piece above is beautiful and intricate. Keep us updated as you have opportunities to do so. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 13, 2022 Author Report Share Posted March 13, 2022 18 hours ago, dgman said: He meant Amazing Kevin Thanks, I forgot about him. My bad! Quote Link to comment Share on other sites More sharing options...
rjweb Posted March 14, 2022 Report Share Posted March 14, 2022 Paul, sorry to hear that you and your wife are having health issues, but hang in there it will get better. Will keep you in our prayers, RJ OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted March 14, 2022 Report Share Posted March 14, 2022 Hi Paul, I'm so sorry to hear of yours and your wife's health problems. But glad you are both still with us. Just take things slow and easy and you will be with us a whole lot longer. Regards to you both. Marg Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 14, 2022 Author Report Share Posted March 14, 2022 Paul, please forgive me if I created a situation that you didn't need. I was and still am very worried about you. After losing Rockytime it doesn't take much to set me to worrying. Everybody here on SSV means so much to me that I notice whenever someone is absent for longer than a couple of days. I'm very sorry to hear of your wife's health struggle and yours too. At least you have each other to lean on. Drop us a note when you have time. We will all be praying for you both. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 14, 2022 Report Share Posted March 14, 2022 Sorry to hear about the health problems, sending prayers for you both. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Fish Posted March 14, 2022 Report Share Posted March 14, 2022 Good to hear from you, you are both strong people. Beautiful work too! OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
stoney Posted March 14, 2022 Report Share Posted March 14, 2022 Great work on the goblet Paul. Sorry to hear about the health issues of you and your wife. I sure hope there are better days ahead for both of you. OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted March 14, 2022 Report Share Posted March 14, 2022 Great work on the goblet. I hope that you and your wife had better/stable days ahead. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Norm Fengstad Posted March 14, 2022 Report Share Posted March 14, 2022 good to hear you are up and around and you sound cheerful as you attend to the struggles of life, great goblet OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.