Popular Post Jaguarguy Posted March 30, 2022 Popular Post Report Share Posted March 30, 2022 I just did this Steve Good 3D puzzle. Pretty quick cutting. I had the most difficulty actually putting it together after I finish cutting!! He had posted the pattern yesterday - today he had a video on how to put it together! I also have been working on a charcuterie board with epoxy river (I know - not a scroll saw project - but fun anyway!). Pics of both sides of the board. jr42, meflick, frankorona and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Karl S Posted March 30, 2022 Report Share Posted March 30, 2022 Nice Cutting board Jaguarguy 1 Quote Link to comment Share on other sites More sharing options...
Jaguarguy Posted March 30, 2022 Author Report Share Posted March 30, 2022 Thanks Karl! Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted March 30, 2022 Report Share Posted March 30, 2022 Nice!!! Saw the puzzle yesterday, considered downloading it but then looked at the pile of other patterns....LOL Looks like a quick, fun cut, may have to print it out for a frustrating day when I just need a project to complete. LOVE the cutting board. Someone needs to do a video and post it up in the training section of the forum (cough, cough)! Jaguarguy 1 Quote Link to comment Share on other sites More sharing options...
Jaguarguy Posted March 31, 2022 Author Report Share Posted March 31, 2022 (edited) 2 hours ago, RabidAlien said: Nice!!! Saw the puzzle yesterday, considered downloading it but then looked at the pile of other patterns....LOL Looks like a quick, fun cut, may have to print it out for a frustrating day when I just need a project to complete. LOVE the cutting board. Someone needs to do a video and post it up in the training section of the forum (cough, cough)! That's the first cutting board AND the first time I have ever used epoxy - so it isn't that difficult. I'll try to video next time I try one. Edited March 31, 2022 by Jaguarguy RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted March 31, 2022 Report Share Posted March 31, 2022 2 hours ago, Jaguarguy said: That's the first cutting board AND the first time I have ever used epoxy - so it isn't that difficult. I'll try to video next time I try one. What epoxy did you use? I tried it once, didn't turn out too well. I didn't get a good seal on the base, apparently, and the color flakes I mixed in clumped up and just piled up everywhere. Quote Link to comment Share on other sites More sharing options...
Jaguarguy Posted March 31, 2022 Author Report Share Posted March 31, 2022 (edited) 13 hours ago, RabidAlien said: What epoxy did you use? I tried it once, didn't turn out too well. I didn't get a good seal on the base, apparently, and the color flakes I mixed in clumped up and just piled up everywhere. I used IceCast Epoxy - the version that was a 1-1 mix. In addition to accurately measuring, I think the key is to stir it good, then stir it again, and then finally stir it again. When did you stir in the color flakes? I put them in after my four times stirring - and then I stirred that four times. It took 5 days for it to cure in the mold. Edited March 31, 2022 by Jaguarguy RabidAlien 1 Quote Link to comment Share on other sites More sharing options...
pet-design Posted March 31, 2022 Report Share Posted March 31, 2022 I think I must make the puzzle for my grand daughter....and avoid that my wife sees the board! Very well done! Jaguarguy 1 Quote Link to comment Share on other sites More sharing options...
RabidAlien Posted March 31, 2022 Report Share Posted March 31, 2022 7 hours ago, Jaguarguy said: I used IceCast Epoxy - the version that was a 1-1 mix. In addition to accurately measuring, I think the key is to stir it good, then stir it again, and then finally stir it again. When did you stir in the color flakes? I put them in after my four times stirring - then I and then I stirred that four times. It took 5 days for it to cure in the mold. Heh. It leaked all over my cardboard box before it had a chance to set up. I'd sealed the bottom with shelf contact paper (it was a round mandala pattern I'd cut and had no idea what else to do with it, so no open ends, no need to build a mold). I stirred the heck out of it, it was the sealing that did me in. I'll check Amazon and take a look at the IceCast Epoxy, maybe give it another shot. Quote Link to comment Share on other sites More sharing options...
daveww1 Posted March 31, 2022 Report Share Posted March 31, 2022 very nice work Quote Link to comment Share on other sites More sharing options...
TAIrving Posted March 31, 2022 Report Share Posted March 31, 2022 What type of wood did you use for the charcuterie board? Quote Link to comment Share on other sites More sharing options...
Jaguarguy Posted March 31, 2022 Author Report Share Posted March 31, 2022 3 hours ago, TAIrving said: What type of wood did you use for the charcuterie board? That's cherry. Quote Link to comment Share on other sites More sharing options...
Jaguarguy Posted March 31, 2022 Author Report Share Posted March 31, 2022 5 hours ago, RabidAlien said: Heh. It leaked all over my cardboard box before it had a chance to set up. I'd sealed the bottom with shelf contact paper (it was a round mandala pattern I'd cut and had no idea what else to do with it, so no open ends, no need to build a mold). I stirred the heck out of it, it was the sealing that did me in. I'll check Amazon and take a look at the IceCast Epoxy, maybe give it another shot. I purchased a mold from Black Forest Wood Company ( https://blackforestwood.com/collections/reusable-epoxy-resin-form/products/reusable-epoxy-resin-form-rectangle ). It was easy to use and board came out fairly easy after a whack with a rubber mallet on the bottom (their recommended method). Quote Link to comment Share on other sites More sharing options...
rdatelle Posted April 1, 2022 Report Share Posted April 1, 2022 I also cut that one out the other day. Try the wooden knot one he has also. Jaguarguy 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted April 1, 2022 Report Share Posted April 1, 2022 Looks great! I downloaded the pattern for the puzzle but haven't had a chance to cut yet. Kudos on the charcuterie board Jaguarguy 1 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted April 1, 2022 Report Share Posted April 1, 2022 Great work! Thanks for sharing and God Bless! Spirithorse Jaguarguy 1 Quote Link to comment Share on other sites More sharing options...
Jaguarguy Posted April 2, 2022 Author Report Share Posted April 2, 2022 Thanks to everyone for taking the time to comment and provide wonderful feedback! Ralph - I ran the pattern for the knot - might be my weekend project! Quote Link to comment Share on other sites More sharing options...
wombatie Posted April 3, 2022 Report Share Posted April 3, 2022 Absolutely love, love, love the board. Marg Jaguarguy 1 Quote Link to comment Share on other sites More sharing options...
Jaguarguy Posted April 3, 2022 Author Report Share Posted April 3, 2022 Thanks Marg! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.