Popular Post Blaughn Posted April 10, 2022 Popular Post Report Share Posted April 10, 2022 (edited) Okay, I admit it. I am a string saver - or in this case a scrap saver. I have a box full of little scraps of walnut, cherry, curly maple, etc. They are just too nice to toss out and besides I just might need them some day. There. I confessed. I have taken a break from scrolling as I am building a jewelry chest for my granddaughter with plus a month of wintering in Florida. So it has been months since I scrolled and I am out of practice. So I thought about creating a pattern that would work with some of those scraps and resharpen my scrolling skills. Here's the result - cut in, as yet, unfinished cherry. This was before I added the oval seen in the attached pattern and added a bit of safety allowance for the dropouts in the word "Peace". This particular stock was 3.5"x 4.25" was and required me to use a Flying Dutchman Ultra Reverse 2/0 blade. That took some real getting used to. Man, those blades are thin! I will be finishing this in my new "home brew" Danish oil/ then Shellac sealer and finally, lacquer. (By the way this formula for Danish oil dries much faster than Watco. Odor free in a day-and-a- half and safe to finish coat in 3 days.) If you missed my post on that here's the website where I found the formula. https://vanduynwoodwork.com/2018/09/18/danish-oil-finish-top-3-reasons-to-mix-your-own/ MASTER single belzeir dove final.pdf Edited April 20, 2022 by Blaughn correct drop-out problem with original jr42, frankorona, danny and 13 others 13 3 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted April 10, 2022 Report Share Posted April 10, 2022 That is lovely. danny and Blaughn 2 Quote Link to comment Share on other sites More sharing options...
pet-design Posted April 10, 2022 Report Share Posted April 10, 2022 Like the pattern, the wood and the fine cutting as Well! Blaughn 1 Quote Link to comment Share on other sites More sharing options...
Dan Posted April 10, 2022 Report Share Posted April 10, 2022 Beautiful! Will make great ornaments. danny and Blaughn 2 Quote Link to comment Share on other sites More sharing options...
Blaughn Posted April 10, 2022 Author Report Share Posted April 10, 2022 1 hour ago, Dan said: Beautiful! Will make great ornaments. Great idea! I hadn't thought about that but it would be perfect size and sentiment for Christmas! Thanks, Dan. Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted April 11, 2022 Report Share Posted April 11, 2022 Nice job, Bruce. And you're not the lone ranger in saving small pieces of wood. I had a piece that I had saved, and it turned out to be the perfect size to cut a diagonal where I could double stack and still fit my pattern. Blaughn 1 Quote Link to comment Share on other sites More sharing options...
Blaughn Posted April 11, 2022 Author Report Share Posted April 11, 2022 6 minutes ago, Dak0ta52 said: Nice job, Bruce. And you're not the lone ranger in saving small pieces of wood. I had a piece that I had saved, and it turned out to be the perfect size to cut a diagonal where I could double stack and still fit my pattern. ......and isn't frustrating when you need that perfect piece that you threw out in a moment of "I've gotta clean this mess up!" Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted April 11, 2022 Report Share Posted April 11, 2022 4 minutes ago, Blaughn said: ......and isn't frustrating when you need that perfect piece that you threw out in a moment of "I've gotta clean this mess up!" Been there... done that! Blaughn 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted April 11, 2022 Report Share Posted April 11, 2022 Really lovely, well done. Marg Blaughn 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted April 11, 2022 Report Share Posted April 11, 2022 very nice Blaughn 1 Quote Link to comment Share on other sites More sharing options...
Blaughn Posted April 20, 2022 Author Report Share Posted April 20, 2022 (edited) The original PDF in this post and the JPG I uploaded in the pattern section had a potential drop-out problem I discovered when cutting the pattern in a tree ornament size. The "P" in Peace survived the cut but just barely. In the PDF above and in the JPG in the pattern section I have added an additional bridge and removed a bit of the ornamental curl in the letter to make the cut a bit less "heart-stopping". Edited April 20, 2022 by Blaughn Quote Link to comment Share on other sites More sharing options...
smitty0312 Posted April 23, 2022 Report Share Posted April 23, 2022 I like that a lot! A+ Blaughn 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted April 25, 2022 Report Share Posted April 25, 2022 Love it. Roly Blaughn 1 Quote Link to comment Share on other sites More sharing options...
Dragonkort Posted April 25, 2022 Report Share Posted April 25, 2022 I defently like it!!! and yes i have tons of scrap wood and little peices lying around lol Im forever telling spike dont throusgh that away!! lol Blaughn 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.