preprius Posted April 10, 2022 Report Share Posted April 10, 2022 (edited) I decided to try @alexfox newest Make Love Not War. For my use I only needed the top layer on a backer. But I had to downsize to 2.75inches wide. This made the branches really thin. I used a 2/0 spiral going slow. I did the internal letter first. I forgot to drill an "O". It was too late to drill it. So I left it alone. Next I did the letters. There was just enough space between the letters and ribbon outline for the 2/0 spiral. It shows i need more practice with the spirals. Oh it is on 1/8" thick Maple. Not plywood. To enhance the 3D effect, I cut outer edge at 45 deg. with #1mgt. Very difficult. I had to pay extra attention. I did this last. This is unfinished. The backer still has a few weeks to be finished. The attached 3 pics show black walnut back, maple back and a pic with pattern still on. The patterns shows smoke marks from using a flame to get the fuzzies off. Edited April 11, 2022 by preprius OCtoolguy, Wichman, meflick and 3 others 6 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted April 11, 2022 Report Share Posted April 11, 2022 very nice job Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.