Popular Post Eric67 Posted April 19, 2022 Popular Post Report Share Posted April 19, 2022 Hello everybody, I'm very happy. I finally received my Chrismast gift of my Chérie but she never said it's for 2021. After many adventures, my scroll saw is finally arrived. I ordered it at October 2021, I'm very patient isn't? I tried it yesterday, that is incredible! Very quiet, no vibration. Compared to my first, it's another world. That is Rolls! (I never had a Rolls but I suppose) Now, I'll can to saw without stopping, night and day. Lol ! I think you can understand my English jollyred, meflick, CSull and 11 others 14 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted April 19, 2022 Report Share Posted April 19, 2022 CONGRATS!!! Enjoy the new toy tool. For the record, your English is just fine (tres bien). OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted April 19, 2022 Report Share Posted April 19, 2022 I remember years ago when I upgraded to my Excalibur 21. How much of a difference and joy it was. Enjoy your new toy and I wish you many happy hours with it. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted April 19, 2022 Report Share Posted April 19, 2022 (edited) Enjoy your new toy. I have the same Pegas almost two years now and it is still doing fine. A couple of things. I, and others, have found as time goes by the tension knowb at the rear tends to move durring operation. Simplest solution,,,a little tape ( I now use some duct tape, as the blue tape dries out and come loose). Also, I was spoiled with my previous cheap Porter Cable saw that had a small spot light on the arm that could be aimed at the blade. The Pegas does not have that so I added a magnetic base flexable arm light that I have mounted on the saw arm. I found that just a Magnifier Lamp was not adequate. I like that the added light can throw a nice shadow of the blade makeing it easier to track the blade on the line. I removed the plastic sheet under the table and actually built a wood sawdust collector that is mounted on the stand just below the blade hole. The box is hooked up to my dust collector. Works good if I remember to turn on the dust collector. And BTW, you can remove the hold down device as you wont need it. Just gets in the way. Edited April 19, 2022 by FrankEV OCtoolguy and munzieb 2 Quote Link to comment Share on other sites More sharing options...
Blaughn Posted April 19, 2022 Report Share Posted April 19, 2022 That looks terrific! Patience triumphs again!!! Enjoy! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 19, 2022 Report Share Posted April 19, 2022 2 hours ago, Eric67 said: Hello everybody, I'm very happy. I finally received my Chrismast gift of my Chérie but she never said it's for 2021. After many adventures, my scroll saw is finally arrived. I ordered it at October 2021, I'm very patient isn't? I tried it yesterday, that is incredible! Very quiet, no vibration. Compared to my first, it's another world. That is Rolls! (I never had a Rolls but I suppose) Now, I'll can to saw without stopping, night and day. Lol ! I think you can understand my English Congratualtions on your new 'toy". Your English is far better than I could do with your native language so no problems there. Please do keep us updated on what you make. We ALL love pictures so the more the better. By the way, what country are you in? I see by looking at your saw that the on/off control is mounted at the rear and is very much different from what we have here in the U.S. Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted April 19, 2022 Report Share Posted April 19, 2022 Very nice!! Looks to be a 30 inch saw? certainly not the normal 21 inch saw that is most common here in the states. Though they are making them available to us soon from what I've heard. Hope you get a lot of joy and cutting from this well built saw for many years. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted April 19, 2022 Report Share Posted April 19, 2022 Congratulations on the new saw. I have the same saw and love it! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
meflick Posted April 20, 2022 Report Share Posted April 20, 2022 Congratulations and enjoy. Your English is quite understandable. Look forward to your project pics. Quote Link to comment Share on other sites More sharing options...
wombatie Posted April 20, 2022 Report Share Posted April 20, 2022 Congratulations. I would love one. Marg Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted April 20, 2022 Report Share Posted April 20, 2022 Treat that woman special. She gave you an outstanding Christmas gift. Wish my woman felt the same about me. I agree with Kevin. That looks like the 30 inch saw. Happy cutting!!! Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 12 hours ago, kmmcrafts said: Very nice!! Looks to be a 30 inch saw? certainly not the normal 21 inch saw that is most common here in the states. Though they are making them available to us soon from what I've heard. Hope you get a lot of joy and cutting from this well built saw for many years. Thank you for your reply, Yes it is, we have the choice between 16", 21" and 30" when I ordered the waiting time was shorter for the 30" Have a good day. kmmcrafts 1 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 12 hours ago, OCtoolguy said: Congratualtions on your new 'toy". Your English is far better than I could do with your native language so no problems there. Please do keep us updated on what you make. We ALL love pictures so the more the better. By the way, what country are you in? I see by looking at your saw that the on/off control is mounted at the rear and is very much different from what we have here in the U.S. Thanks Octoolguy, I'm Frenchman I live near Strasbourg France(East France close to Germany). I think standards are not the same in Europe as in the USA but overall devices are similar Good day OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 13 hours ago, FrankEV said: Enjoy your new toy. I have the same Pegas almost two years now and it is still doing fine. A couple of things. I, and others, have found as time goes by the tension knowb at the rear tends to move durring operation. Simplest solution,,,a little tape ( I now use some duct tape, as the blue tape dries out and come loose). Also, I was spoiled with my previous cheap Porter Cable saw that had a small spot light on the arm that could be aimed at the blade. The Pegas does not have that so I added a magnetic base flexable arm light that I have mounted on the saw arm. I found that just a Magnifier Lamp was not adequate. I like that the added light can throw a nice shadow of the blade makeing it easier to track the blade on the line. I removed the plastic sheet under the table and actually built a wood sawdust collector that is mounted on the stand just below the blade hole. The box is hooked up to my dust collector. Works good if I remember to turn on the dust collector. And BTW, you can remove the hold down device as you wont need it. Just gets in the way. Thanks Frank for your advice. they are always welcome it can't be seen in the photo but on it I put a light, I need very good light to cut and I have a magnifying glass too, from time to time it is necessary OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 1 hour ago, Dak0ta52 said: Treat that woman special. She gave you an outstanding Christmas gift. Wish my woman felt the same about me. I agree with Kevin. That looks like the 30 inch saw. Happy cutting!!! Hi agree Rodney. I'm lucky to met her. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 15 hours ago, NC Scroller said: CONGRATS!!! Enjoy the new toy tool. For the record, your English is just fine (tres bien). Thank you Scott, do you speak French? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 7 hours ago, meflick said: Congratulations and enjoy. Your English is quite understandable. Look forward to your project pics. Thank you Meflick OCtoolguy and meflick 2 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 2 hours ago, wombatie said: Congratulations. I would love one. Marg thank you Wombatie OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 8 hours ago, dgman said: Congratulations on the new saw. I have the same saw and love it! Thank you Dgman OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 15 hours ago, WayneMahler said: I remember years ago when I upgraded to my Excalibur 21. How much of a difference and joy it was. Enjoy your new toy and I wish you many happy hours with it. Thank you Wayne. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted April 20, 2022 Report Share Posted April 20, 2022 3 hours ago, Eric67 said: Thank you Scott, do you speak French? Sorry Eric, I took French in high school and even spent a week in Paris but that was 50 + years ago. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted April 20, 2022 Report Share Posted April 20, 2022 enjoy your new saw OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 20, 2022 Author Report Share Posted April 20, 2022 7 hours ago, NC Scroller said: Sorry Eric, I took French in high school and even spent a week in Paris but that was 50 + years ago. For me it's the opposite, I started learning English only seven years ago, I am 62 years old, it is sure that it is less easy than if I was young. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 20, 2022 Report Share Posted April 20, 2022 2 hours ago, Eric67 said: For me it's the opposite, I started learning English only seven years ago, I am 62 years old, it is sure that it is less easy than if I was young. English is a very hard language to learn because so many words are spelled the same but have different meanings and pronounciations. Best of luck to you. Quote Link to comment Share on other sites More sharing options...
Eric67 Posted April 21, 2022 Author Report Share Posted April 21, 2022 8 hours ago, OCtoolguy said: English is a very hard language to learn because so many words are spelled the same but have different meanings and pronounciations. Best of luck to you. I agree it's not easy but it's a pleasure to learn. Thank you OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.