kmmcrafts Posted April 27, 2022 Report Share Posted April 27, 2022 Am I missing something with my planer? The hook-up for dust collection comes straight out the back of the planer. I would think they'd send you some sort of elbow to direst it out away from the outfeed lumber. I sold my old ryobi yesterday and I can see that my 4" hose from my dust collector will slip over the fitting in the back of the planer but unless I drop it down from the ceiling, get a elbow, or ? it's going to get knocked off when the board comes through. I'm sure I can find a way to tie up the hose out of the way but I'd have thought they'd have a easier ready to hook up elbow or something that'd make more sense. Obviously the engineer doesn't understand the machine operation.. My Ryobi was designed in a way that the chips come out the one side and your hose would / never could get in the way of the outfeed. So now that my rant is over, LOL.... How did those of you that have these DeWalt planers hook up your dust collection. I might not get back to my woodwork until mid summer.. I have my whole shop in disarray and I'm considering running piping all through the shop from my dust collector. I could pipe it down from the ceiling if I actually do pipe my whole shop out. Something I've been wanting to do but on the back burner, along with many other things. I may not even do any work this year and focus on getting the shop finished up they way I intended to several years ago, LOL OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
TAIrving Posted April 27, 2022 Report Share Posted April 27, 2022 I am jealous that you got a planer. One just wouldn't quite fit in my budget or my shop. So, for now, I resaw close to the desired thickness and then use the belt sander to get the panel to the desired thickness and finish. It is not as good as a planer, but good enough for what I do these days. The belt sander is loud and makes a lot of sawdust, maybe about as bad as the planer? OCtoolguy and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted April 27, 2022 Author Report Share Posted April 27, 2022 Yeah the planer is noisy and makes a big mess in a hurry if you don’t have some sort of dust collection. I guess I shouldn’t complain as it is a nice planer from what I read about them. Just seems like the chip outlet could have been a better design. I don’t know if I’m missing a part to it or that’s just how they came. Seems pretty silly to have the port straight out the back in the center of the outfeed area, lol. Maybe I’m missing the idea or a part for it. Who knows but I’ll figure something out. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
hineps Posted April 27, 2022 Report Share Posted April 27, 2022 I put a 90 degree fitting on the planer and have it pointed to the side. Works pretty well for me. Phil Jim Finn, OCtoolguy and kmmcrafts 2 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 27, 2022 Report Share Posted April 27, 2022 (edited) Not sure about yours but most require buying a "port" of some sort. I have a Delta and used a Ridgid shop vac adapter to adapt mine to my shop vac. Edited April 27, 2022 by OCtoolguy danny and kmmcrafts 1 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted April 27, 2022 Report Share Posted April 27, 2022 You just like to sir up controversy Kevin! Order a 90° fitting from Amazon. It will be there tomorrow. Fortunately for me, I already had one when I got my planer. kmmcrafts and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Dan Posted April 27, 2022 Report Share Posted April 27, 2022 I currently can't get close enough to the dust collector so I just attached some elbow and attached a dust collector bag to it. It does a great job. When our garage is built I'll move the shop out of the basement and have a better set up, but this is working great for me. It's out of the way and collects the waste. OCtoolguy, John B, kmmcrafts and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted April 27, 2022 Author Report Share Posted April 27, 2022 5 hours ago, hineps said: I put a 90 degree fitting on the planer and have it pointed to the side. Works pretty well for me. Phil Thanks, I think I found one that'll work well. My confusion is it seems like DW would know that it would need a elbow, LOL OCtoolguy, Jim Finn, barb.j.enders and 1 other 4 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted April 27, 2022 Author Report Share Posted April 27, 2022 35 minutes ago, dgman said: You just like to sir up controversy Kevin! Order a 90° fitting from Amazon. It will be there tomorrow. Fortunately for me, I already had one when I got my planer. You may be onto something with that first sentence, LOL. You know, my el-cheapo Ryobi had a molded dust shield cover that had a built in port... off to the side too, LOL.. Seems like DW could have included a fitting at the price of the equipment I still have to buy a elbow. I guess I can sort of understand as not everyone would be using a 4" connector as some hook to a shop vac. etc.. To be fair I had to buy a reducer for the vac. to hook up to my 4" hose so.. DW just don't know so they let you buy what you need. Amazon!! I hate that place.. I try to do as little business with them as possible.. Oops there goes another of your first sentences.. .. Lets just say I'm a seller on Amazon and I know how they treat their sellers vrs. their customers.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted April 27, 2022 Author Report Share Posted April 27, 2022 30 minutes ago, Dan said: I currently can't get close enough to the dust collector so I just attached some elbow and attached a dust collector bag to it. It does a great job. When our garage is built I'll move the shop out of the basement and have a better set up, but this is working great for me. It's out of the way and collects the was That's a pretty interesting set up Dan. Does that bag get heavy and pull on the tubing? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted April 27, 2022 Report Share Posted April 27, 2022 (edited) They are trying to keep the price down I'm sure and that would add another $50 to the planer. I made my adapter for under $10 and it works great. Edited May 23, 2022 by OCtoolguy danny and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
Dan Posted April 27, 2022 Report Share Posted April 27, 2022 2 minutes ago, kmmcrafts said: That's a pretty interesting set up Dan. Does that bag get heavy and pull on the tubing? Yes, slightly. I could rig up a brace or shelf to put under it but I'll wait to see what I do when I move it to the garage. It does cut down on noise without the dust collector running and it's easy to empty. kmmcrafts, danny and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted April 28, 2022 Report Share Posted April 28, 2022 Before I got a dust collector I hooked a shop vac hose to it and hooked the other end to a dust deputy and bucket. The planer has enough power to blow the dust and shavings into it. kmmcrafts and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Roberta Moreton Posted April 28, 2022 Report Share Posted April 28, 2022 I am now thinking of trying to just let the planer blow the chips into a bucket and unhook the shop vac. Less noise! OCtoolguy, Dave Monk, John B and 1 other 4 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted April 28, 2022 Report Share Posted April 28, 2022 (edited) I have the older model dewalt (DW734), and it came with a 90 degree dust port to attach to the planer. It's removable so I store it in the drawer below my cart. My vac hooks right up to it as well. It's actually one of the best dust control units I have in the shop LOL Edited April 28, 2022 by new2woodwrk OCtoolguy and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted May 2, 2022 Author Report Share Posted May 2, 2022 I ended up buying the elbow that Ray shown in his reply from the etsy seller, he also had a connector for my table saw so I ordered that one too. Hopefully the seller will be quick to get them out in the mail since I no longer have my old planer or table saw.. both sold fairly fast on FB . OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
timelett Posted May 4, 2022 Report Share Posted May 4, 2022 I built a box and put the shop vac in it and I have a dust deputy on a large sump container from menards, the craftsman planers have a wedge type shoot that points to the side. OCtoolguy and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
TripleJScroller Posted May 5, 2022 Report Share Posted May 5, 2022 I sit mine on the tailgate of my pickup and let it blow into the bed and then send the Grand daughter up there with a broom and sweep it up...lol. One of these day's I'll get around to some kinda dust collection in the shop. OCtoolguy and John B 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted May 5, 2022 Report Share Posted May 5, 2022 2 hours ago, TripleJScroller said: I sit mine on the tailgate of my pickup and let it blow into the bed and then send the Grand daughter up there with a broom and sweep it up...lol. One of these day's I'll get around to some kinda dust collection in the shop. Why? Quote Link to comment Share on other sites More sharing options...
TripleJScroller Posted May 9, 2022 Report Share Posted May 9, 2022 On 5/5/2022 at 12:49 PM, OCtoolguy said: Why? Just the easiest way I've found. I don't have a stand for my planer, nor room in my shop for one. The first time I used it I sat it on saw horses in the yard and it made a massive mess so I just decided to sit it on my tailgate and blow into the bed of the truck where its easy to clean up. Not a perfect solution, but it works. Jim Finn, John B, Gonzo and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted May 15, 2022 Report Share Posted May 15, 2022 (edited) On 5/9/2022 at 7:13 AM, TripleJScroller said: Just the easiest way I've found. I don't have a stand for my planer, nor room in my shop for one. The first time I used it I sat it on saw horses in the yard and it made a massive mess so I just decided to sit it on my tailgate and blow into the bed of the truck where its easy to clean up. Not a perfect solution, but it works. I love it! Simple, easy, and cheap. Plus, the bed of the pickup is a hell of a lot bigger than a dust collector. Hmmmm….. I wonder if my wife would let me buy a new “dust collector”. Edited May 15, 2022 by Gonzo OCtoolguy and TripleJScroller 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted May 15, 2022 Report Share Posted May 15, 2022 On 5/9/2022 at 5:13 AM, TripleJScroller said: Just the easiest way I've found. I don't have a stand for my planer, nor room in my shop for one. The first time I used it I sat it on saw horses in the yard and it made a massive mess so I just decided to sit it on my tailgate and blow into the bed of the truck where its easy to clean up. Not a perfect solution, but it works. Sounds perfect to me. No dust collection system needed. A broom, a sack and a hose. Done. TripleJScroller 1 Quote Link to comment Share on other sites More sharing options...
Eplfan2011 Posted August 18, 2022 Report Share Posted August 18, 2022 (edited) Late to the party, but I saw a YouTube video from a guy selling a aftermarket chip cover allowing the exit of chips through the top of the planer for the dewalt 735 you did have to cut a hole in the top cover but it did look great. I I have a 735 and considering doing it to mine. I'll see if I can find it and post it here. Here's the link Edited August 18, 2022 by Eplfan2011 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted August 19, 2022 Report Share Posted August 19, 2022 1 hour ago, Eplfan2011 said: Late to the party, but I saw a YouTube video from a guy selling a aftermarket chip cover allowing the exit of chips through the top of the planer for the dewalt 735 you did have to cut a hole in the top cover but it did look great. I I have a 735 and considering doing it to mine. I'll see if I can find it and post it here. Here's the link I really don't see a big advantage doing what he did. It could still use an elbow. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Eplfan2011 Posted August 19, 2022 Report Share Posted August 19, 2022 30 minutes ago, Dave Monk said: I really don't see a big advantage doing what he did. It could still use an elbow. Two advantages for me I can fold the tables up without having to disconnect everything My planers always connected in it own spot dust collection comes down from cieling so no hoses to trip over But we all have different needs . OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.