Popular Post Dak0ta52 Posted May 12, 2022 Popular Post Report Share Posted May 12, 2022 (edited) This pattern is one FrankEV posted a month or so ago. I love this song and knew I wanted to cut it when I seen the piece Frank had shared. I used 1/4 inch oak ply for the front and a 1/4 inch underlayment material for the backer. (Less expensive and usable since it is painted and a limited amount shows.) As with most of my projects the piece is stained with Minwax Natural and has 5 coats clear gloss with light sanding between coats. In the enlarged picture it appears to have grit (or specks) in the finish but it is actually a reflection from direct sunlight. The piece is actually very smooth and clean. The backer is painted gloss black. The frame is pine stained with Minwax Red Oak. Franks was much better because of the colors he added but I'm still pleased with how this project turned out. I recently purchased some water color pencils and plan to give them a try after doing a little testing first. I started a Jim Blume "American" piece so it will probably be a while for my next "Brag." Edited May 12, 2022 by Dak0ta52 Added comment about picture quality. TripleJScroller, heppnerguy, Fish and 18 others 21 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted May 12, 2022 Report Share Posted May 12, 2022 Great job on the lettering! Ya done good!!! Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted May 12, 2022 Report Share Posted May 12, 2022 great job, it's beautiful Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted May 12, 2022 Report Share Posted May 12, 2022 One of my favorite songs. Great cutting. Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
TAIrving Posted May 12, 2022 Report Share Posted May 12, 2022 Great job and I love the subject. I am currently in overload for cutting fonts and am avoiding such. John B and Dak0ta52 1 1 Quote Link to comment Share on other sites More sharing options...
Roberta Moreton Posted May 12, 2022 Report Share Posted May 12, 2022 That turned out beautiful! Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted May 12, 2022 Report Share Posted May 12, 2022 Turned out great. The pine frame sure matches the oak well. Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted May 12, 2022 Report Share Posted May 12, 2022 16 hours ago, Dak0ta52 said: ...Franks was much better because of the colors he added .... Not a darn thing wrong with your version. I like to color my work, but that in itself does not make it better, maybe just a little different. Just me, but would have liked to see a little wider (maybe 1") dark border around the cut panel inside the frame. John B and Dak0ta52 1 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted May 13, 2022 Report Share Posted May 13, 2022 Very nice job! Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
John B Posted May 13, 2022 Report Share Posted May 13, 2022 Very Nice Rodney One of my favourite songs. This a great adaption enjoy. wombatie, Dak0ta52, Foxfold and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
John B Posted May 13, 2022 Report Share Posted May 13, 2022 18 hours ago, TAIrving said: Great job and I love the subject. I am currently in overload for cutting fonts and am avoiding such. Whenever I design something using font's I try very hard to use Script, Then can just cut from letter to letter without all the stopping and starting. Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted May 13, 2022 Author Report Share Posted May 13, 2022 18 hours ago, FrankEV said: Not a darn thing wrong with your version. I like to color my work, but that in itself does not make it better, maybe just a little different. Just me, but would have liked to see a little wider (maybe 1") dark border around the cut panel inside the frame. I agree with you 100% Frank. It was after I glued the front to the backer that I realized the backer should have been larger. Live and learn I guess! John B and FrankEV 2 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted May 14, 2022 Report Share Posted May 14, 2022 Now that is an Awesome Piece!!! Love the Song Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted May 14, 2022 Report Share Posted May 14, 2022 Excellent, love it. Roly Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted May 15, 2022 Report Share Posted May 15, 2022 What a beautiful piece of art. Love it. Marg Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted May 17, 2022 Report Share Posted May 17, 2022 What a wonderful project. I was told about this pattern by my good friend, Scrapile, Paul, when I talked with him yesterday on the phone. He told my, he is also cutting this pattern. I can see why. It is amazing. One of the best 'word art ' patterns I have ever witnessed. Dick heppnerguy Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.