Popular Post preprius Posted July 17, 2022 Popular Post Report Posted July 17, 2022 I had this cutting setting around for a while now. I was trying to find a home for it so I finally decided to paint it and use it as a refrigerator magnet. This was from an Alex Fox pattern that I made to have 1 layer and smaller. I also put the 45 deg angle on the outer edge. I found this difficult to do. Painting skills are poor. I had to mix colors to make pink and light blue hippie style. I wanted a grey military for the bottom text. Yellow green mixed to attempt spring green. Just winging it with paint scheme. Cheap hobby acrylic paint in tubes was used. Shrinking the design made cutting center of letters very narrow. 1/8 inch solid maple. Cut with 2/0 spiral Pegas. Outer edge was cut with MGT #1. jollyred, Dak0ta52, WayneMahler and 8 others 11 Quote
daveww1 Posted July 17, 2022 Report Posted July 17, 2022 excellent job OCtoolguy and amazingkevin 2 Quote
OCtoolguy Posted July 17, 2022 Report Posted July 17, 2022 (edited) Very nice! Painting/finishing is my weak area and not fun. Edited July 18, 2022 by OCtoolguy danny 1 Quote
Dave Monk Posted July 17, 2022 Report Posted July 17, 2022 Great message. Nice job. OCtoolguy 1 Quote
amazingkevin Posted July 21, 2022 Report Posted July 21, 2022 thats just so nice to see!!! OCtoolguy 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.