Popular Post heppnerguy Posted July 19, 2022 Popular Post Report Share Posted July 19, 2022 I made another Steve Good Strato caster guitar for a friend and mailed it off today without photographing it first but I also finally got around to cutting a Russ Beard pattern that I have had my eye on for a long time. I am really into fret work right now but can not always get around to cutting them. Having been gone for about a month and away from my shop I have not been able to much of anything in my shop. That said, I cut this Mountain Sheep just to finally give it a try. As you can see, I still have the framing to do. I had purchased one for it but the pattern turned out to be a little larger than I anticipated. After I finish the framing and finish work, I have decided not to post that as this shares the part I am really interested with this project. I have a request for one of my farm combines so I may put off the finishing touches on this one until I get it done. I have to add that I am anxious to cut yet another of Russ Beards pattern as soon as i can. Dick heppnerguy meflick, Dave Monk, Scrolling Steve and 14 others 17 Quote Link to comment Share on other sites More sharing options...
Brianr24 Posted July 19, 2022 Report Share Posted July 19, 2022 Wow! Beautiful job heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted July 19, 2022 Report Share Posted July 19, 2022 terrific job heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
bobscroll Posted July 19, 2022 Report Share Posted July 19, 2022 Hi Dick, How nice it is to look at your projects and this one is no different! Really good job scrolling it out, Thank you for posting, Bob heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted July 19, 2022 Report Share Posted July 19, 2022 Fantastic job, Dick. I understand how fretwork can be addictive. I just finished cutting Jim Blume's stagecoach which I probably have close to 30 hours. I've stained and placed on backer and hope to frame this weekend. I will say that I needed to do something a little easier and set up another (simple) pattern to cut while waiting on finishes/glue to dry on the stagecoach. As for your Mountain Sheep, I'm positive your frame will be outstanding. I believe you have that science down to a snap. amazingkevin and heppnerguy 1 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 19, 2022 Author Report Share Posted July 19, 2022 10 hours ago, Brianr24 said: Wow! Beautiful job Thank you. I am pretty happy with the outcome. It took a little longer than I expected it to but I do still have to spend more time to finish the project. Dick heppnerguy amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 19, 2022 Author Report Share Posted July 19, 2022 10 hours ago, daveww1 said: terrific job Thank you for your kind comment. It was too good of a pattern for me to not give it a try. Dick heppnerguy amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 19, 2022 Author Report Share Posted July 19, 2022 8 hours ago, bobscroll said: Hi Dick, How nice it is to look at your projects and this one is no different! Really good job scrolling it out, Thank you for posting, Bob Thank you. It is so nice of you to take the time to look at the few things I get around to cutting. It is extremely hot in Southern Arizona in the summer. I hear it is also quite warm in England right now also. It is often 90 degrees F. for a low temperature at night here so the shop get pretty warm and it is difficult to cool it off so that it is comfortable enough to scroll. I do have an air conditioner in my shop but the area of the shop is fairly large and the daily outdoor temperature is up to 113 degrees some days but always at least 104 degrees, on cooler days. The temperature does not change much even if we have a windy day or a cloudy day. Makes spending much time in the shop a bit uncomfortable. Dick heppnerguy amazingkevin and bobscroll 2 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 19, 2022 Author Report Share Posted July 19, 2022 1 hour ago, Dak0ta52 said: Fantastic job, Dick. I understand how fretwork can be addictive. I just finished cutting Jim Blume's stagecoach which I probably have close to 30 hours. I've stained and placed on backer and hope to frame this weekend. I will say that I needed to do something a little easier and set up another (simple) pattern to cut while waiting on finishes/glue to dry on the stagecoach. As for your Mountain Sheep, I'm positive your frame will be outstanding. I believe you have that science down to a snap. I am anxious to see your stagecoach project. I too, am eyeing it for one of my next cuts. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
Charlie E Posted July 19, 2022 Report Share Posted July 19, 2022 Really nice job! So realistic looking! Glad you got some shop time. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 20, 2022 Report Share Posted July 20, 2022 I lived in Mesa,phoenix,Scottsdale,and it does get quit hot.your doing a good job!!! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted July 20, 2022 Report Share Posted July 20, 2022 A lot of nice scrollwork went into that project....Very Nice! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 20, 2022 Author Report Share Posted July 20, 2022 8 hours ago, Scrolling Steve said: A lot of nice scrollwork went into that project....Very Nice! Thank you for your kind comments. I love to scroll fret work when I get a chance Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 20, 2022 Author Report Share Posted July 20, 2022 18 hours ago, Charlie E said: Really nice job! So realistic looking! Glad you got some shop time. I love it when i come across a pattern that has good detail and a little bit of challenge to go along with it. Thank you for the nice comments. Dick heppnerguy Charlie E 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted July 21, 2022 Report Share Posted July 21, 2022 Oh wow that is some cutting. You did an excellent job. Marg Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.