Popular Post munzieb Posted August 23, 2022 Popular Post Report Share Posted August 23, 2022 (edited) My wife said we need a mantel clock and found one on Pedro's Web site finescrollsaw.com. Contacted him and he send me a PDF file after I purchased. It all went very smoothly. Took it to my local UPS store and were able to print it on card stock using A6 paper format dimensions. 12" x 17" I wanted to do it in Bubinga but my wife wanted a lighter color, so I went with oak. I used 3.5 pieces of 5.5 x 48" 1/4" oak. I did modify the top from the original pattern so that the top was narrower than the piece below it. I also added a 1/8" shim between to bottom and next piece up. I also rounded the extention pieces on the base plate. Finish in Gloss Lacquer. Edited August 24, 2022 by munzieb modify number BadBob, lawson56, Dave Monk and 24 others 24 3 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted August 23, 2022 Report Share Posted August 23, 2022 Stunning!!! I've always wanted to do a piece like that. Your modifications are spot on. OCtoolguy and munzieb 1 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted August 23, 2022 Report Share Posted August 23, 2022 Now that is some Awesome work!!! I made my Wife a Pendulum Clock for our 25th Anni, Still working, this past May was our 46th. OCtoolguy and munzieb 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted August 23, 2022 Report Share Posted August 23, 2022 Beautiful clock, Bernd. You say you have your patterns printed on card stock, Why do you prefer that over regular paper? munzieb and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
munzieb Posted August 23, 2022 Author Report Share Posted August 23, 2022 Thanks, the fret work is not overly complicated. It's better to do all the inside cuts and then cut the outsides so you are working with larger pieces so they are easier to hold. It's more complicated to layout all the pieces on the wood to get the maximum usage out of the wood with minimum waste. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
munzieb Posted August 23, 2022 Author Report Share Posted August 23, 2022 2 minutes ago, Scrappile said: Beautiful clock, Bernd. You say you have your patterns printed on card stock, Why do you prefer that over regular paper? Thanks Paul. For smaller projects I'll use regular paper but for larger projects that I take to the copy store, I'll use card stock. I'll have them print up 3 sets incase I want to make more or if I screw things up. Their machines print better on it and it's not as floppy as regular paper. I use mostly skip tooth blades and it also tends to force the dust down. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted August 24, 2022 Report Share Posted August 24, 2022 Oh that is amazing. Time well spent. Marg OCtoolguy and munzieb 1 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted August 24, 2022 Report Share Posted August 24, 2022 fantastic job munzieb and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted August 24, 2022 Report Share Posted August 24, 2022 "TImeless!" OCtoolguy and munzieb 1 1 Quote Link to comment Share on other sites More sharing options...
scrollerpete Posted August 24, 2022 Report Share Posted August 24, 2022 WIW WOW WOW it will be treasured munzieb and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted August 24, 2022 Report Share Posted August 24, 2022 Beautiful craftsmanship, RJ munzieb and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted August 24, 2022 Report Share Posted August 24, 2022 Very nicely done. Pedro has some great fretwork patterns. If I recall correctly, a while back someone posted a question about Pedro, as they had tried to contact him and had gotten no reply. Glad to see he's still in business. munzieb and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
munzieb Posted August 24, 2022 Author Report Share Posted August 24, 2022 1 hour ago, Bill WIlson said: Very nicely done. Pedro has some great fretwork patterns. If I recall correctly, a while back someone posted a question about Pedro, as they had tried to contact him and had gotten no reply. Glad to see he's still in business. I was surprised how quickly he responded once I ordered the pattern. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
don watson Posted August 25, 2022 Report Share Posted August 25, 2022 Very well done indeed. I love it. OCtoolguy and munzieb 1 1 Quote Link to comment Share on other sites More sharing options...
bobscroll Posted August 25, 2022 Report Share Posted August 25, 2022 Hi Bernd, So nice to see a scrolled Clock! Just beautiful to look at, Well done Bernd, Thanks for posting, Bob OCtoolguy and munzieb 1 1 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted August 25, 2022 Report Share Posted August 25, 2022 That is one awesome clock! Very nice indeed! munzieb and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted August 25, 2022 Report Share Posted August 25, 2022 (edited) On 8/23/2022 at 1:24 PM, munzieb said: My wife said we need a mantel clock and found one on Pedro's Web site finescrollsaw.com. Contacted him and he send me a PDF file after I purchased. It all went very smoothly. Took it to my local UPS store and were able to print it on card stock using A6 paper format dimensions. 12" x 17" I wanted to do it in Bubinga but my wife wanted a lighter color, so I went with oak. I used 3.5 pieces of 5.5 x 48" 1/4" oak. I did modify the top from the original pattern so that the top was narrower than the piece below it. I also added a 1/8" shim between to bottom and next piece up. I also rounded the extention pieces on the base plate. Finish in Gloss Lacquer. Very nice! How many of them are you allowed to make from that one pattern? Just curious after reading the "copyright" thread. Edited August 25, 2022 by OCtoolguy munzieb 1 Quote Link to comment Share on other sites More sharing options...
John B Posted August 26, 2022 Report Share Posted August 26, 2022 Excellent work and a beautiful outcome. I would love to attempt something like that, and have seen many designs that I like. OCtoolguy and munzieb 1 1 Quote Link to comment Share on other sites More sharing options...
john nelson Posted August 26, 2022 Report Share Posted August 26, 2022 very nice......It is great to see more advanced scroll saw projects. Seems folks today are afraid to try ore advanced projects.....If you can cut out a teddy bear you can cut out anything, regardless how difficult it is...................just takes more cuts. JAN OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
munzieb Posted August 26, 2022 Author Report Share Posted August 26, 2022 2 hours ago, john nelson said: very nice......It is great to see more advanced scroll saw projects. Seems folks today are afraid to try ore advanced projects.....If you can cut out a teddy bear you can cut out anything, regardless how difficult it is...................just takes more cuts. JAN Thank you John. This was not really that hard. The lower fret work were 3 individual pieces and the top were 2 pieces. The section holding the clock face is one piece but it is easier to hold when it's larger. All the pieces are key and slot assembly. There are a lot of pieces to cut but most are straight cuts. It does take a little to figure out how it all goes together since there is no exploded view for the assembly. I spend about 4 days, a few hours each day to complete it with finishing. Because I modified the original on the top and tonges, It did take a little longer. It cost me about $50 for material and finish. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
ozwood Posted August 27, 2022 Report Share Posted August 27, 2022 you have plenty of time on youre hands.good job munzieb 1 Quote Link to comment Share on other sites More sharing options...
Tbow388 Posted August 27, 2022 Report Share Posted August 27, 2022 Now that is some Scroll Saw talent! munzieb 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted September 3, 2022 Report Share Posted September 3, 2022 Excellent work. Roly Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.