Popular Post Hawk Posted September 5, 2022 Popular Post Report Share Posted September 5, 2022 I bought these plans somewhere around the late 90's. While I was fired up about this project when I got the plans, I was still pretty new to scrolling and when I looked at the plans I decided it was a bit to large for me to do on the Ryobi 16" single speed I had at the time. Plus I didn't want to use plywood (too boring) and my wood knowledge was non existent at the time. Well, now it's 2022, and I'm finally ready to take this on. I won't be using plywood, rather making my own laminate to take advantage of natural wood colors. I have 2 saws that are more than capable of handling this project. A question for anyone who has done this project, is there any reason why the 2 wheels can't be stacked for the cut. I've only look briefly at the plans, but really don't seen any reason why they couldn't be stacked? Chis bobscroll, Juan Rodriguez, artisanpirate and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted September 5, 2022 Report Share Posted September 5, 2022 I'd stack cut all I could.. the wheel, the fence and the uprights,, Probable most the pieces of the seats also. This quite an undertaking. Keep us posted. tomsteve, new2woodwrk, Dan and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Dan Posted September 5, 2022 Report Share Posted September 5, 2022 I've never done this pattern but I have to agree with Paul, stack cut all you can. Set a lot of small goals and before you know it, it'll be complete. Cheers! new2woodwrk, danny, OCtoolguy and 1 other 4 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted September 6, 2022 Report Share Posted September 6, 2022 I can see a lot of pieces that could e stack cut. I would carefully check the 2 wheels, but don't see why you couldn't. Like Dan said, a lot of small goals should make this more enjoyable. Keep us posted on your progress. OCtoolguy and new2woodwrk 2 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted September 6, 2022 Report Share Posted September 6, 2022 Show pics on you progress. new2woodwrk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Tom-in-Ashland Posted September 6, 2022 Report Share Posted September 6, 2022 Re: laminating your own wood - suggest you consider 1/8 BB and veneer it. Veneer of about any wood you want is available. ( see here https://www.veneersupplies.com/categories/Raw__Wood__Veneer/Wood__Veneer__A__-__G/ ). Not sure want your budget would be but a good pump and bag would be around $350 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted September 6, 2022 Report Share Posted September 6, 2022 that will be a fun project OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted September 6, 2022 Report Share Posted September 6, 2022 That looks intimidating! Keep us posted with pics. OCtoolguy and danny 2 Quote Link to comment Share on other sites More sharing options...
Norm Fengstad Posted September 6, 2022 Report Share Posted September 6, 2022 Good, exciting project. keep us posted on the progress OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
crupiea Posted September 6, 2022 Report Share Posted September 6, 2022 This really looks like a fun thing to try, Best of luck with it. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Hawk Posted September 7, 2022 Author Report Share Posted September 7, 2022 Got enough copies made, over the next few days I'll get together a materials list then get wood ordered. I'll post pictures along the way, this will take me probably most of the winter as I only get a few hours a week on my shop. I'm really looking forward to the challenge. Chris meflick, OCtoolguy, Lucky2 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Hawk Posted September 7, 2022 Author Report Share Posted September 7, 2022 Just had to post this. I sat down today with the plans to generate a parts list for all the little stuff, like motor screws,pegs and such. I searched everywhere but no accessories kit for this anywhere. So as I sat down with the plans a little voice went off in my head to check the back of the file cabinet where I keep my plans. Apparently when I purchased the plans I was smart enough to get the accessories kit too. There it was in the back of the file still sealed firm the post office when it was delivered. Surprised the crap outa me, didn't think I was that smart (lol). So if ever there was a sign, this is it. Its Ferris Wheel time...... Chris OCtoolguy, Woodrush, meflick and 6 others 6 1 2 Quote Link to comment Share on other sites More sharing options...
Peter N White Posted September 7, 2022 Report Share Posted September 7, 2022 Just shows how clever you were and probably still are. OCtoolguy and danny 2 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted September 7, 2022 Report Share Posted September 7, 2022 I am gonna put in my 2 cents worth, even though it's been awhile since I have stacked cut any thing, that's the way I would go. I agree keep us posted.I would Love to see the finished Wheel. OCtoolguy and danny 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 7, 2022 Report Share Posted September 7, 2022 I'm standing by to see progress pics. Not a project I'd want to be undertaking but I'm anxious to see yours. danny 1 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted September 8, 2022 Report Share Posted September 8, 2022 Looks like fun, enjoy the challenge OCtoolguy and danny 2 Quote Link to comment Share on other sites More sharing options...
Hawk Posted September 9, 2022 Author Report Share Posted September 9, 2022 Just want to let everyone know that I plan to officially start somewhere around the end of November. I will be posting in the "Works in Progress" thread when I do. Between now and then I have a couple of small projects to finish up, then gather the wood for the Ferris Wheel Until then I will be going thru the building and cutting process in my head. This helps me to get a game plan together for when I actually do start. Looks like I will be able to stack the main wheels and a couple of fence parts. The main wheels being stacked will save a ton of time!. Chris Dave Monk and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 9, 2022 Report Share Posted September 9, 2022 Looking forward to it Chris. I should take lessons from you on planning. I never plan. I just jump headlong into a project and I'm sure that's why I end up doing a lot of it more than once. Sorta the way I've lived my life too. I guess I'm too old to learn new tricks. danny and Hawk 2 Quote Link to comment Share on other sites More sharing options...
spirithorse Posted September 10, 2022 Report Share Posted September 10, 2022 Congratulations on finding the parts kit and I wish you great success on your project! God Bless! OCtoolguy and Hawk 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 11, 2022 Report Share Posted September 11, 2022 For those who may want to try something just a bit easier, check this out. https://www.instructables.com/Wooden-Toy-Ferris-Wheel/ Lucky2 and barb.j.enders 2 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted September 16, 2022 Report Share Posted September 16, 2022 i built the dome clock a few years ago. i think there was only 1 or 2 pieses i couldnt stack cut- mainly because those ones didnt have duplicate pieces. stack cutting is the way to go. it not only speeds up the process but also helps with consistency of the cuts of the parts. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Hawk Posted September 16, 2022 Author Report Share Posted September 16, 2022 5 hours ago, tomsteve said: i built the dome clock a few years ago. i think there was only 1 or 2 pieses i couldnt stack cut- mainly because those ones didnt have duplicate pieces. stack cutting is the way to go. it not only speeds up the process but also helps with consistency of the cuts of the parts. After seeing your post, the idea hit me to keep a log for this project. Hours cutting, wood cost and such. Might be an interesting set of information.. OCtoolguy and tomsteve 2 Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 17, 2022 Report Share Posted September 17, 2022 All I will say is Good Luck Marg OCtoolguy and Hawk 1 1 Quote Link to comment Share on other sites More sharing options...
Hawk Posted September 20, 2022 Author Report Share Posted September 20, 2022 On 9/17/2022 at 1:37 AM, wombatie said: All I will say is Good Luck Marg LOL, Thanks, I'm just glad I will not be taking video of the process, that could get ugly.... OCtoolguy and wombatie 2 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted September 22, 2022 Report Share Posted September 22, 2022 On 9/16/2022 at 4:37 PM, Hawk said: After seeing your post, the idea hit me to keep a log for this project. Hours cutting, wood cost and such. Might be an interesting set of information.. i agree. i havent gone through that thread since i posted it. didnt make me feel like doing another one but fun to reminisce. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.