Needmore Posted September 27, 2022 Report Share Posted September 27, 2022 Has anyone made/built a circle sanding jig? I need to sand the outside edge of scroll saw projects. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 27, 2022 Report Share Posted September 27, 2022 Gonna need more info on this request. Maybe a pic or two of what you are working on. Quote Link to comment Share on other sites More sharing options...
Eplfan2011 Posted September 27, 2022 Report Share Posted September 27, 2022 (edited) 5 hours ago, Needmore said: Has anyone made/built a circle sanding jig? I need to sand the outside edge of scroll saw projects. Check out Steve good's videos on YouTube, I'm sure he has one on there. Edit .... I just looked, I didn't see it but found many others just search circle sanding jig. Edited September 27, 2022 by Eplfan2011 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted September 27, 2022 Report Share Posted September 27, 2022 Here is what I use. Very basic. Of coarse with this on you have to have a center hole in the working piece. You can drill holes in the slider to fit the hole in your circle. O used this mainly when making wheels and gears. works pretty well, but downside only on something you are willing to have a center hole in. OCtoolguy, danny and Lucky2 2 1 Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted September 28, 2022 Report Share Posted September 28, 2022 Paul, could you please let me know, what happens to the tightening knob, when you flip the jig over to use the jig? Does it not get stuck, right in the way of things? Len OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Needmore Posted September 28, 2022 Author Report Share Posted September 28, 2022 Thanks every one I'll try the one that Steve Good has on youtude. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
BadBob Posted September 28, 2022 Report Share Posted September 28, 2022 This should give you some ideas. OCtoolguy and danny 1 1 Quote Link to comment Share on other sites More sharing options...
Wichman Posted September 28, 2022 Report Share Posted September 28, 2022 One additional note. If you are trying to true up a circle without a center hole, create a blank circle with a hole, then attach the blank without a hole on top with double stick tape or adhesive, sand and remove. OCtoolguy, danny and Gene Howe 1 2 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted September 28, 2022 Report Share Posted September 28, 2022 10 hours ago, Lucky2 said: Paul, could you please let me know, what happens to the tightening knob, when you flip the jig over to use the jig? Does it not get stuck, right in the way of things? Len I only use that jig on my disc belt sander. It has a small table. The knob is set far enough back to miss the table. I loosen it so the slider will slide, put the jig on the table, and set the slide to slide the project up to the sander, then reach under and tighten the knob. The knob bolt screws up against the slider and holds it in place. I do not flip the jig over, the first picture is the jug set in place the last picture is just to show what the bottom of the jig looks like. Lucky2 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted September 30, 2022 Report Share Posted September 30, 2022 Thanks Paul, now I can envision it. Len Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.